2Wire HomePortal 1000HW
2Wire HomePortal 1000 HW
Availability: uncommon
FCC approval date: 04 September 2003
Country of manuf.: Malaysia
Type: access point, dsl modem
FCC ID: PGR2WHPLHW
Power: 6 VDC, 2 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.5 mm (ID), 9.5 mm (LEN)
CPU1: 2Wire Medusa
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (M-Systems MD2811-D16-V3Q18)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Unigen UGSV1286T-75 × 2)
Expansion IFs: none specified
WI1 chip1: Texas Instruments ACX100
WI1 chip2: Maxim MAX2820
WI1 802dot11 protocols: b
WI1 antenna connector: none
ETH chip1: 2Wire Medusa
ETH chip2: Kendin KS8721B
LAN speed: 100M
LAN ports: 1
b
Flags: ADSL
Default SSID: 2WIREXXX (5 addl. devices)
Default IP address: 172.16.0.1
the IP 172.16.0.1 is used by 4 additional devices
of which 0 are 2Wire devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| 2Wire HomePortal 1000HW | 2Wire | Texas Instruments | Maxim |
| 2Wire HomePortal 1000SW | 2Wire | Texas Instruments | Maxim |
For a list of all currently documented 2Wire chipsets with specifications, see 2Wire.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
- Support page (Pace) • User guide
"CHIPBOY-SLI" is silkscreened on the board.
The CPU (on the CPU Grave Yard) has a TriMedia core.
- Device also has a Silicon Labs Si3101 and HW2000 on board.
The default SSID is 2WIRE followed by the last three digits of the serial number.
- The default WEP key is printed on the unit under the serial number.
- The device has no reset button. Resettting the password appears
- to require 2Wire support to provide a temporary password..
Images
- board scans
board top
board bottom
