Accton WG3005B1-17
Accton WG3005B 1-17
FCC approval date: 21 August 2002
Type: wireless router
FCC ID: HEDWG3005B1-17
Power: 9 VDC, 1 A
Connector type: barrel
CPU1: ADMtek ADM5106
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Intel TE28F800B3BA90)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond Model?)
Expansion IFs: PCMCIA (16-bit)
PCMCIA slots: 1
WI1 module: unknown
WI1 module IF: PCMCIA (16-bit)
WI1 chip1: Atmel AT76C502A
WI1 chip2: RFMD RF3000
WI1 chip3: RFMD RF2948B
WI1 802dot11 protocols: b
WI1 antenna connector: none
ETH chip1: ADMtek ADM5106
Switch: ADMtek ADM5106
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
b
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| SMC SMC7004VWBR v1 | HEDWG3005B1-17 HEDACC2632WV2 |
For a list of all currently documented ADMtek chipsets with specifications, see ADMtek.
For a list of all currently documented Atmel chipsets with specifications, see Atmel.
The FCC test report lists the following models as covered by this FCC ID...
- WG3005B1
- PCI BLW-04EX (Planex BLW-04EX)
- SMC SMC7004VWBR (SMC SMC7004VWBR v1)
The shell in the FCC photos is marked with Broad Lanner Wave, which appears to be for the Planex BLW-04EX.
The FCC manual states the specifications for the device, which are below...
- Output power: >+15dBm, Typically +17dBm
- Recieve sensitivity (at 8% BER 1E-5)
- -80dBm for 11Mbps
- -83dBm for 5.5Mbps
- -88dBm for 2Mbps
- -90dBm for 1Mbps
"P/N:141330220000E REV:0A" and "MADE IN TAIWAN" is silkscreened on the wireless module.
