Actiontec M1000 (Qwest)
Actiontec M1000 (Qwest)
FCC approval date: 13 February 2007
Country of manuf.: China
Type: wireless router, dsl modem
FCC ID: LNQW1000
Power: 12 VDC, 0.6 A
Connector type: barrel
CPU1: Infineon PSB7200ZDW
FLA1: 8 MiB 8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX29LV640DBTC-90G)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W9812G6IH-6)
Expansion IFs: none specified
Serial: yes, internal, 5-pin header, unpopulated, 3.3V TTL, JP603
WI1 module: Actiontec W1000
WI1 module IF: unknown
WI1 chip1: Texas Instruments TNETW1350A
WI1 chip2: Texas Instruments TNETW3422
WI1 802dot11 protocols: bg
WI1 antenna connector: none
ETH chip1: Infineon PSB7200ZDW
LAN speed: 100M
LAN ports: 1
bg
Default SSID: myqwestXXXX (3 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 783 additional devices
of which 15 are Actiontec devices
For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
"802VTG Rev: 4A" and "T-015" is silkscreened on the wireless module in the FCC photos.
- The module is shown as using TNETW1350A+TNETW3422 w/ two USB connectors...
