Actiontec MI424WR rev I
Actiontec MI424WR I
FCC approval date: 05 May 2011
Country of manuf.: China
Local image
Type: wireless router, FiOS modem
FCC ID: LNQMI424WRI
Power: 12 VDC, 1.8 A
Connector type: barrel
CPU1: Marvell 88F6560 (1.2 GHz)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Hynix H27U1G8F2BTR)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5CB64M16DP-CF)
Expansion IFs: USB 2.0
USB ports: 2
JTAG: yes, 14-pin header, unpopulated, CON1
Serial: yes, 3.3V TTL, 6-pin header, populated, (115200,8,N,1), J7
WI1 chip1: Atheros AR9287
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Marvell 88F6560
ETH chip2: Marvell 88E1545
Switch: Marvell 88F6560
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
bgn
Additional chips
8-Kb I2C CMOS Serial EEPROM;Catalyst Semiconductor;24C08WI;;1;
USB 2.0 HUB Controller; Genesys Logic;GL850G;;1;
MoCA 1.1 controller;Entropic Communications;EN2510-NG1;;2;
Stock bootloader: U-Boot 2009.08 Marvell version: 2.1.6_NQ
Stock FW OS: Linux 2.6.16.14feroceon OpenRG
Flags: MoCA 1.1
Default SSID: XXXXX (9 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1297 additional devices
of which 7 are Actiontec devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Actiontec MI424WR rev A | Intel XScale | Ralink | Ralink |
| Actiontec MI424WR rev C | Intel XScale | Atheros | |
| Actiontec MI424WR rev D | Intel XScale | Atheros | |
| Actiontec MI424WR rev E | Cavium | Atheros | |
| Actiontec MI424WR rev F | Cavium | Atheros | |
| Actiontec MI424WR rev G | Cavium | Atheros | |
| Actiontec MI424WR rev H | Broadcom | ||
| Actiontec MI424WR rev I | Marvell | Atheros |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
This is a router used by Verizon for FiOS installations.
Single-core ARM based, ARM926EJ as recognized by the default Linux firmware
On the DD-WRT forums (internal shot and elaboration on specifications)
- the device is presumably 88F6560 (AVANTA family) based
The device uses two Entropic Communications EN2510 for the coaxial (MoCA) connections.
The default SSID follows a pattern of 5 letters and numbers (example: 2P6G2).
