Belkin F9K1104
Belkin F9K1104 v1 (E9K9000)
Manuf (OEM/ODM): Senao
Type: wireless router
FCC ID: K7SF9K1104V1, A8JEIR900
IC ID: 3623A-F9K1104V1
PCB ID: 7016A049100a
Power: 12 VDC, 3.3 A
Connector type: barrel
CPU1: Ubicom IP8000AU (600 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix Model?)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Nanya NT5CB64M16DP-CF × 2)
Expansion IFs: Mini PCIe, USB 2.0
Mini PCIe slots: 2
USB ports: 2
WI1 module: unknown
WI1 module IF: Mini PCIe
WI1 chip1: Atheros Model?
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: unknown
WI2 module IF: Mini PCIe
WI2 chip1: Atheros Model?
WI2 802dot11 protocols: an
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Ubicom IP8000AU
Switch: Atheros Model?
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1
abgn
Default SSID: belkin.XXX (20 addl. devices)
, belkin.XXX.5GHz (5 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 97 are Belkin devices
| FCC ID | |
|---|---|
| EnGenius EIR900 | A8JEIR900 |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Ubicom SoC's with specifications, see Ubicom.
N900 Dual Band Wireless Router
"7016A049100a V-1.00" appears to be silkscreened on the board in the FCC photos.
- There appears to be an IDT PCI-Express switch on the board (89HPES5T5 ?).
- A2HP02 is printed on the label of one of the wireless modules.
The device appears to be identical to the EnGenius EIR900.
- The device is manufactured by Senao.
All of the antennas used are Airgain antennas (3x N2420DS, 3x N5x20SC).
PSU
The power adapter included with the unit is a Powertron Electronics
- PA1045-120HUB (100-240VAC ~ 50/60Hz, 1.0A -> 12VDC, 3.3A)
