D-Link DCS-930L rev A1
D-Link DCS-930L A1
Manuf (OEM/ODM): Alpha Networks
Type: camera
FCC ID: KA2CS930LA1
IC ID: 4216A-CS930LA1
Power: 5 VDC, 1.2 A
Connector type: barrel
CPU1: Ralink RT3050F (320 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Winbond W29GL032CB7S)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond W9825G6JH-6)
Expansion IFs: none specified
Serial: yes, 4-pad header, (57600 8N1)
WI1 chip1: Ralink RT3050F
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Ralink RT3050F
LAN speed: 100M
LAN ports: 1
bgn
Additional chips
Camera Control Processor;iPassion;iP2970-L;;1;
2.4GHz Power Amplifier IC;Skyworks;SE2597L;;1;
Stock bootloader: U-Boot 1.1.3
Stock FW OS: Linux 2.6.21
Default SSID: dlink (38 addl. devices)
Default IP address: 192.168.0.20
the IP 192.168.0.20 is used by 3 additional devices
of which 2 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 4 additional devices
of which 2 are D-Link devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| D-Link DCS-930L rev A1 | Ralink | Ralink | |
| D-Link DCS-930L rev A2 | Ralink | Ralink |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
"8CS930M..2A1G is silkscreened on the board in the FCC photos.
The camera control processor is linked to the SoC via USB 2.0.
