D-Link DI-614+ rev A1 / A2
D-Link DI-614+ A1 / A2
Manuf (OEM/ODM): Global Sun GL2422RT-0T2 V1.0
Amazon image
ASIN
B000068UY6 (
, On Amazon, On CCC, multiple uses)
multiple revisions of this device, use caution
Type: wireless router
FCC ID: KA2DI614-PLUS
Power: 5 VDC, 2.5 A
Connector type: barrel
CPU1: Samsung S3C4510B
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX29LV800BTC-90)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Hynix HY57V643220CT-6)
Expansion IFs: none specified
WI1 module: unknown
WI1 module IF: unknown
WI1 chip1: Texas Instruments ACX100
WI1 chip2: RFMD Model?
WI1 802dot11 protocols: b
WI1 antenna connector: RP-SMA
ETH chip1: Samsung S3C4510B
Switch: Marvell 88E8052
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
b
Stock FW OS: ThreadX
Default SSID: default (99 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 783 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 340 additional devices
of which 180 are D-Link devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| D-Link DI-614+ rev A1 / A2 | Samsung | Texas Instruments | RFMD |
| D-Link DI-614+ rev B1 | Conexant | Texas Instruments | Maxim |
| D-Link DI-614+ rev B2 | Conexant | Texas Instruments | Maxim |
For a list of all currently documented Samsung chipsets with specifications, see Samsung.
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
• Support page, Support page, Interface emulator
"GL2422RT-0T2-B03 V1.0" is silkscreened on the board.
- "GL2422T4 V1-1" (and probably some other stuff) is silkscreened on the wireless module's board (under its shield).
- The board is using all STONE branded radial capacitors.
On DSL-Reports (pictures and comparison between revs. A and B)
On x123.info
On the HRI hardware table
- OS noted as ThreadX
The default SSID is default.
- Possible 00:40:05 and 00:80:C8 OUIs...
The stock firmware is based on ThreadX RTOS.
The FCC ID appears to be invalid.
Wi-Fi Certified : W000569 (as of 08/12/2002)
