Edimax BR-6226n
Edimax BR-6226n
Availability: OEM, unknown
FCC approval date: 23 February 2009
Country of manuf.: China
Type: wireless router
FCC ID: NDD9562250817
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3050 (320 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320BTI-70G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (ESMT M12L128168A-7T)
Expansion IFs: none specified
WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: default (99 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 57 are Edimax devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 73 are Edimax devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Edimax 3G-6200n | NDD9562250817 |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Per the DD-WRT forums, this FCC ID is used for the 6226n.
"1244-00000618-01Z" is silkscreened on the board in the FCC photos.
- "1242-00000291-01Z" is silkscreened on the board shown below. It isn't the same one shown in the FCC photos, either - the layout is considerably different.
The FCC test report lists the following as identical models..
- Edimax BR-6225n
- Edimax GR-225n
- Edimax 3G-6200n
- Edimax 3G-200n
- Jensen AL29150 / AL29150-3G
- IC ICTRACOM 524445
- 2Direct WL0052
- PCI MZH-WNH
- Assman DN-7049-1
Images
