Intel Wireless Gateway (WLGW2011)
Intel Wireless Gateway (WLGW2011) BAK
Availability: EoL
Manuf (OEM/ODM): Gemtek
FCC approval date: 02 August 2001
Country of manuf.: Taiwan
Type: wireless router
FCC ID: PD9-R900531, MXF-C900525
PCB ID: A65293-001
Power: 5 VDC, 2 A
Connector type: barrel
CPU1: Samsung S3C4510B
FLA1: 0.5 MiB524,288 B <br />4,096 Kib <br />512 KiB <br />4 Mib <br />4.882812e-4 GiB <br /> (Eon EN29F040-70J)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Elite MT M12L16161C × 2)
Expansion IFs: PCMCIA (16-bit)
PCMCIA slots: 1
Serial: yes, console port (DE-9)
WI1 module: Gemtek WL-216C
WI1 module IF: PCMCIA (16-bit)
WI1 chip1: Harris HFA3841
WI1 chip2: Intersil HFA3861B
WI1 chip3: Intersil HFA3683A
WI1 802dot11 protocols: b
WI1 antenna connector: MMCX
ETH chip1: Samsung S3C4510B
ETH chip2: Davicom DM9101F
ETH chip3: Realtek RTL8019AS
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1
b
Default SSID: 101 (5 addl. devices)
Default IP address: 192.0.2.1
the IP 192.0.2.1 is used by 2 additional devices
of which 2 are Intel devices
Default login user: blank
Default login password: Intel
| FCC ID | |
|---|---|
| D-Link DI-713P rev A1 | MXF-C900525 |
| D-Link DI-714 rev A1 | MXF-R900621 MXF-C900525 |
| Gemtek WL-216C | MXF-C900323 MXF-C900525 |
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Intel Wireless Gateway (WLGW2011) | Samsung | Harris | Intersil |
| Intel Wireless Gateway II (AP1210) | Samsung | Intersil | Intersil |
For a list of all currently documented Harris chipsets with specifications, see Harris.
For a list of all currently documented Samsung chipsets with specifications, see Samsung.
Intel Wireless Gateway
"A65293-001" and "2100701001" is silkscreened on the main board.
The device uses a Twist TG16C550CJ UART and an Altera programmable logic device.
- The CPU used in this device is a Samsung S3C4510B01-QERO.
Serial output
The console password for the device is the same as the default web admin password - Intel.
Boot log
Wait 5 sec to boot or type 'upload' if your firmware was corrupted and you want to reload the firmware through the XMODEM protocol. >>Startup in progress ! Please input ROUTER password Password:
Settings
Please input ROUTER password Password: ***** ROUTER SETTINGS a). ROUTER IP ADDRESS <192.0.2.1> b). ROUTER SUBNET MASK <255.255.255.0> c). ROUTER NAME <Intel Gateway> d). ROUTER PASSWORD <*****> e). WAN ETHERNET MAC ADDR. <00:02:B3:65:E4:83> f). WAN ETHERNET SETTINGS <INTERNET ACCESS> g). WIRELESS SETTINGS h). ROUTER DNS IP ADDRESS <0.0.0.0> i). LAN DHCP SERVER <ENABLE> j). LAN DHCP CLIENT <DISABLE> k). VIRTUAL SERVER <DISABLE> l). ROUTING TABLE m). MAC ACCESS CONTROL LIST SETTING n). LOAD DEFAULT SETTINGS o). SAVE AND RESTART DEVICE p). DEVICE INFORMATION q). QUIT Select ?
p). DEVICE INFORMATION . Firmware Code Version V2.40 . UM9008 WAN ETHER MAC........ 00:02:B3:65:E4:83 . MAC ADDR for LAN............ 00:02:B3:65:E4:82 . RF ESSID....................101 . RF Channel..................11 . Encryption..................Disabled . LAN DHCP SERVER ........... Enabled . LAN IP ADDRESS ............. 192.0.2.1 . WAN DHCP CLIENT ........... Enabled . WAN IP ADDRESS ............. 0.0.0.0
