LevelOne WBR-6601

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

LevelOne WBR-6601 v1

Manuf (OEM/ODM): SerComm

(Est.) release date: 06 January 2010

Type: wireless router, dsl modem

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: Ralink RT3050 (320 MHz)
CPU2: Infineon PSB 50601 (266 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
FLA2: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Brand? Model?)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Brand? Model?)
RAM2: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Brand? Model?)

Expansion IFs: none specified

WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: RP-SMA

ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4

bgn

Flags: ADSL2+

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 783 additional devices
of which 17 are LevelOne devices
Default login user: admin
Default login password: password
admin:password credentials used by 421 additional devices
of which 12 are LevelOne devices

802dot11 OUI: none specified

For a list of all currently documented Infineon (Lantiq) chipsets with specifications, see Infineon.
For a list of all currently documented Ralink chipsets with specifications, see Ralink.


Wireless-N 150Mbps ADSL2+ Modem Router

Product page

Listed on LevelOne's Broadband Comparison Table.

Noted as a RT3050+AMAZON-SE device w/ 4MB Flash and 16 MB RAM

The manual specifies the following..

  • Transmit Power
802.11b: typically 15dBm @ normal temp. ramge +- 1.5dBm
802.11g: typically 18dBm @ normal temp. ramge +- 1.5dBm
802.11n: typically 13dBm @ normal temp. ramge +- 1.5dBm
  • Receiver Sensitivity
802.11b: -83dBm +- 1dBm @ 11Mbps
802.11g: -66dBm +- 1dBm @ 54Mbps
802.11n, HT20: -65dBm +- 1dBm @ 65Mbps
802.11n, HT40: -62dBm +- 1dBm @ 135Mbps

The (obviously SerComm authored) manual also specifies the default SSID as Admin (... hmm.).

Possible 00:C0:02 (SerComm) OUI (it's in the FCC manual)

Images