Linksys WAP54G v3.0

Linksys WAP54G v3.0

Manuf (OEM/ODM): Gemtek WAPB-133GL

FCC approval date: 17 May 2005

S/N prefix: MDG3
Series: WAP54G

Local image

Type: access point

FCC ID: Q87-WAP54GV3
IC ID: 3839A-WAP54GV3

Power: 12 VDC, 0.5 A
Connector type: barrel

CPU1: Broadcom BCM5352E
FLA1: 2 MiB2,097,152 B 16,384 Kib 2,048 KiB 16 Mib 0.00195 GiB  (Intel TE28F160C3BD70)
RAM1: 8 MiB8,388,608 B 65,536 Kib 8,192 KiB 64 Mib 0.00781 GiB  (ICSI IC42S16400)

Expansion IFs: none specified

WI1 chip1: Broadcom BCM5352E
WI1 chip2: Broadcom BCM2050
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-TNC

ETH chip1: Broadcom BCM5352E
LAN speed: 100M
LAN ports: 1

bg

Stock FW OS: Linux 2.4.20

TPFirmware supported: DD-WRT • (List)

Default IP address: 192.168.1.245
the IP 192.168.1.245 is used by 18 additional devices
of which 7 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 289 additional devices
of which 142 are Linksys devices

802dot11 OUI: none specified

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
Linksys WAP54G v1.0	Broadcom	Broadcom	Broadcom
Linksys WAP54G v1.1	Broadcom	Broadcom	Broadcom
Linksys WAP54G v2	Broadcom	Broadcom	Broadcom
Linksys WAP54G v3.0	Broadcom	Broadcom	Broadcom
Linksys WAP54G v3.1	Broadcom	Broadcom	Broadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

Wireless-G Access Point

• Support page

OEM: Gemtek WAPB-133GL (WAPB-133GL_V01)

Links of Interest

Flashing

NOTE: During configuration or flashing a device, the only things that should be hooked to the device is the computer and power.

Flashing DD-WRT

WARNING: Requires Micro VINT for DD-WRT, Do not flash anything else!

WARNING: Requires K2.4 for DD-WRT, Do not flash anything else!

Flashing Linksys WAP54G All Versions

WARNING: DD-WRT was not originally intended to be loaded on a WAP unit. It was found that it will run but it is a tricky unit to load and have function correctly. Below are a compilation of methods/instructions to assist you with creating a DD-WRT loaded WAP unit.