Linksys WRVS4400N v1.0
Linksys WRVS4400N v1.0
Manuf (OEM/ODM): SerComm
FCC approval date: 09 August 2006
Country of manuf.: Taiwan
Type: wireless router
FCC ID: Q87-WRVS4400N
IC ID: 3839A-WRVS440N
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Star STR9202
CPU2: Star STR9109
FLA1: ? MiB (Brand? Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Brand? Model?)
RAM2: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)
Expansion IFs: Mini PCI
Mini PCI slots: 1
WI1 module: Gemtek WMIM-205GN
WI1 module IF: Mini PCI (long)
WI1 chip1: Marvell 88W8361P
WI1 chip2: Marvell 88W8060
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x3:2
WI1 antenna connector: U.FL
ETH chip1: Star STR9202
ETH chip2: Star STR9109
Switch: Vitesse VSC7385
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
bgn
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1295 additional devices
of which 153 are Linksys devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1321 additional devices
of which 58 are Linksys devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Linksys WRVS4400N v1.0 | Star | Marvell | Marvell |
| Linksys WRVS4400N v1.1 | Star | Marvell | Marvell |
| Linksys WRVS4400N v2.0 | Star | Ralink | Ralink |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
For a list of all currently documented Star (Cavium) SoC's with specifications, see Star.
Wireless-N Gigabit Security Router with VPN
Product page
Administration guide
Shell access on the WRVS4400N (linked from here on the DD-WRT forums)
'stable Firmware for WRVS4400N with working IPv6' on the Linksys forums links to the firmware here
The STR9109 appears to handle the WLAN while the STR9202 handles the Ethernet interfaces. Per this thread on the OpenWrt forums, the STR9109 has access to 32MB RAM and the STR9202 has access to 64MB RAM.
The wireless card in the FCC photos has an OUI of 00:14:A5 indicating a Gemtek device. It appears identical to the Gemtek WMIM-205GN. The main board appears to be OEM SerComm.
The manual on the Cisco-Linksys site says the default SSID is 'ciscosb'. The manual in the FCC documents says the default SSID is 'linksys-n'.
