Netgear WG302v2

Netgear WG302 v2
Availability: EoL

FCC approval date: 14 April 2006
Country of manuf.: China

Type: access point

FCC ID: PY306100027, PY306100028
IC ID: 4054A-06100027

Power: 12 VDC, 1.2 A
Connector type: barrel

CPU1: Intel XScale IXP422 (266 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Intel Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Mira Model? × 2)

Expansion IFs: Mini PCI
Mini PCI slots: 1
Serial: yes, console, DE-9

WI1 module: Cameo WLG-1302
WI1 module IF: Mini PCI
WI1 chip1: Atheros AR2414A
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL, RP-SMA

ETH chip1: Intel XScale IXP422
ETH chip2: Altima AC101L
LAN speed: 100M
LAN ports: 1

bg

TPFirmware supported: DD-WRT • (List)

Default SSID: NETGEAR (44 addl. devices)
Default IP address: 192.168.0.228
the IP 192.168.0.228 is used by 3 additional devices
of which 1 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 421 additional devices
of which 302 are Netgear devices

802dot11 OUI: none specified

	FCC ID
Netgear WAG302v2	PY306100028

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
Netgear WG302v1	Intel XScale	Atheros	Atheros
Netgear WG302v2	Intel XScale	Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Intel XScale SoC's with specifications, see Intel XScale.

---

ProSafe 802.11g Wireless Access Point

 • Support page

Netgear WG302v2 on TechInfoDepot

DD-WRT for these devices requires activation.

The manual specifies the default SSID as NETGEAR.