SerComm VD625

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

SerComm VD625 (TIM)
Availability: common

(Est.) release date: May 2016
Country of manuf.: China

Type: CPE, wireless router, dsl modem

Power: 12 VDC, 2 A
Connector type: barrel

CPU1: Broadcom BCM63168V (400 MHz, 2 cores)
FLA1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (ESMT F59L2G81A-25T)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Nanya NT5CC64M16GP-DI)

Expansion IFs: USB 2.0
USB ports: 2

WI1 chip1: Broadcom BCM63168V
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Broadcom BCM4360
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: none

ETH chip1: Broadcom BCM63168V
Switch: Broadcom BCM53124S
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1


Additional chips
xDSL CPE Line Driver (LD);Broadcom;BCM6303;;1;
2ch 150V Tracking SLIC;Microsemi;Le9672WQC;;1;
Mixed Signal Microcontroller;TI;MSP430G2513;;1;

Stock bootloader: CFE 1.0.38-116.118 BCM963268

Stock FW OS: Linux 3.4.11-rt19

Flags: VDSL2

Default IP address:
the IP is used by 1194 additional devices
of which 0 are SerComm devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1222 additional devices
of which 0 are SerComm devices

802dot11 OUI: B4:A5:EF (-, 1 W)
Ethernet OUI: B4:A5:EF (-, 1 W)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

SerComm AG Combo VD625 Smart Modem TIM

Product page

CPE from SerComm sold by TIM (ex Telecom Italia).

"AUR00B-1.6" is silkscreened on the main board in the images.

Builtin 4x GbE port LAN and 1x GbE WAN port, VDSL2 modem and 2x FXS

The SoC is a Broadcom BCM63168 and the 5GHz Wi-Fi BCM4360
It has an 802.11n 2T2R (2.4GHz) Wi-Fi and 802.11ac 3T3R (5GHz)

See also SerComm and Huawei HHG2500..

Forum threads

Serial Bootlog:
Linux version 3.4.11-rt19 (root@ubuntu) (gcc version 4.6.2 
 (Buildroot 2011.11) ) #1 SMP PREEMPT Thu May 19 02:26:05 CST 2016
963168MBV3 prom init

CPU revision is: 0002a080 (Broadcom BMIPS4350)
Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
Brought up 2 CPUs

Base: 4.16_02 / 4.1602-1.0.38-116.118
CFE version 1.0.38-116.118 for BCM963268 (32bit,SP,BE)
Build Date: Fri Jan 29 14:08:03 CST 2016 (adam@localhost)

Chip ID: BCM63168D0, MIPS: 400MHz, DDR: 400MHz, Bus: 200MHz
Main Thread: TP0
Memory Test Passed
Total Memory: 134217728 bytes (128MB)
Boot Address: 0xb8000000

NAND ECC BCH-4, page size 0x800 bytes, spare size used 64 bytes
NAND flash device: , id 0xc8da block 128KB size 262144KB
Board IP address                  :  
Host IP address                   :  
Gateway IP address                :   
Run from flash/host/tftp (f/h/c)  : f  
Default host run file name        : vmlinux  
Default host flash file name      : bcm963xx_fs_kernel  
Boot delay (0-9 seconds)          : 1  
Default host ramdisk file name    :   
Default ramdisk store address     :   
Board Id (0-29)                   : 963168MBV3  
Number of MAC Addresses (1-32)    : 16  
Base MAC Address                  : b4:a5:ef:73:b5:c8  
PSI Size (1-64) KBytes            : 24  
Enable Backup PSI [0|1]           : 0  
System Log Size (0-256) KBytes    : 0  
Auxillary File System Size Percent: 0  
Main Thread Number [0|1]          : 0  
WLan Feature                      : 0x00  
Voice Board Configuration (0-19)  : LE9672  

External switch id = 53125

See also

Flash: STMicroelectronics NAND512W3A2DN6 (64MB NAND)
RAM: Nanya NT5TU64M16GG-AC (128MB DDR2-800)