ADATA AS510S3-60GM

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

ADATA AS510S3 -60GM

EAN: 4713435793459 (UPC DB, On eBay)

Amazon image

ASIN
B005TFGX0C (Flag of the United States.svg, On Amazon, On CCC)

Form factor: 2.5"
Interface: SATA III

Controller: LSI SandForce SF-2281VB1-SDC

Flash: 64 GiB (Micron 29F64G08CBAAA x 8) (MLC)
Vendor stated capacity: 60 GB55.857 GiB <br />0.0545 TiB <br />57,197.331 MiB <br />60,000 MB <br />59,975,748,331.745 B <br />
Usable capacity: 60 GiB0.0586 TiB <br />61,440 MiB <br />64.451 GB <br />64,450.56 MB <br />64,424,509,440 B <br />

60GB SATA III SandForce 6 GB/sec 2.5" Solid State Drive

Micron 29F64G08CBAAAWP 8GB NAND (MLC)

  • From a unit w/ a S/N of 1C1020154550 w/ ROM version 20D Dec 20 2010
Build 288571 and CRP version 101 Oct 11 2011 Build 345997

"BPML", "E186014", "94-V0" and "S511ZZC1" are marked on the board.

  • Serial console (115200 8n1 3.3V levels) is available as the "J4" jumper
near the edge of the board opposite of the SATA connector together with
what looks like to be an unpopulated ribbon cable connector. Possibly JTAG.

This particular unit's FW doesn't seem to boot correctly, serial console output:

[ROM] PORRST
[ROM] Chip ID 0x200026BB

*** ROM Rev 20D Dec 20 2010 Build 288571 ***
[ROM] Try BCH[1]: CP=33 EC=54 EP=485
[ROM] Load CRP
*** CRP Rev 101 Oct 11 2011 Build 345997 ***
[ROM] Load FWR
éýÞ^ހýÞýÞýޘºýހºýހýÞýÞý!ޜ  [... junk follows ...]

When the J3 jumper is shorted on the board the ROM firmware

enters the bootloader waiting for FW upload:
[ROM] PORRST
[ROM] Chip ID 0x200026BB

*** ROM Rev 20D Dec 20 2010 Build 288571 ***
[ROM] Force Download: waiting for Download Microcode Command...
[ROM] Waiting for Link to come up...
[ROM] Link is UP.
[ROM] Hard Reset ===> Link is Down.
[ROM] PHY Ready
[ROM] Sig Sent
[ROM] Undec Cmd 0xec
[ROM] Undec Cmd 0xef
[ROM] Data Cmd
[ROM] READ EXT CMD
[ROM] Data Cmd
[ROM] READ EXT CMD
[ROM] Data Cmd
[ROM] READ EXT CMD
[ROM] Data Cmd
[ROM] READ EXT CMD
[ROM] Data Cmd
[ROM] READ EXT CMD
[ROM] Data Cmd
[ROM] READ EXT CMD