AVM FRITZ!Box Fon WLAN 7170 v2
AVM FRITZ!Box Fon WLAN 7170 v2
Availability: common
Series: G125
Type: wireless router, dsl modem, analog phone gateway
Power: 12 VDC, 1.2 A
Connector type: barrel
CPU1: Texas Instruments TNETD7200 (212 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX29LV640MTTC-90G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Infineon HYB39SC256160FE-7)
Expansion IFs: USB 1.0
USB ports: 1
WI1 chip1: Texas Instruments TNETW1350A
WI1 chip2: Texas Instruments TNETW3422
WI1 802dot11 protocols: bg
WI1 antenna connector: U.FL
ETH chip1: Texas Instruments TNETD7200
Switch: Infineon ADM6996FC
LAN speed: 100M
LAN ports: 4
bg
Default SSID: FRITZ!Box Fon WLAN 7170 (1 addl. devices)
Default IP address: 192.168.178.1
the IP 192.168.178.1 is used by 9 additional devices
of which 9 are AVM devices
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| AVM FRITZ!Box Fon WLAN 7170 v1 | Texas Instruments | Texas Instruments | Texas Instruments |
| AVM FRITZ!Box Fon WLAN 7170 v2 | Texas Instruments | Texas Instruments | Texas Instruments |
For a list of all currently documented Texas Instruments (TI) chipsets with specifications, see Texas Instruments.
- Manual
- BoxMatrix Wiki pages: FRITZ!Box 7170, 7170v1, 7170v2 (EN)
- FritzBox Wiki page (archived): FRITZ!Box 7170 (DE)
- HOWTO for OpenWRT on the FRITZ!Box 7170
There are multiple revisions (v1 and v2) of the device. v1 uses a larger FPGA and a ADM6996LC switch and v2 uses a smaller FPGA and a ADM6996FC switch. See the BoxMatrix 7170 article for a version comparison.
