Allnet ALL0333CJ

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Allnet ALL0333CJ (rev.C)
Availability: EoL

EAN: 4038816003348 (UPC DB, On eBay)
Country of manuf.: China

Type: dsl modem

Power: 12 VDC, 0.4 A
Connector type: barrel

CPU1: Lantiq (Intel) PSB 50601 (266 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Spansion S29GL032N90TF104)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Zentel A3V28S40JTP-60)

Expansion IFs: none specified

ETH chip1: Lantiq (Intel) PSB 50601
LAN speed: 100M
LAN ports: 1

Stock bootloader: U-Boot 1.1.5

Stock FW OS: Linux 2.4.31

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Flags: ADSL2+

Ethernet OUI: none specified

For a list of all currently documented Lantiq (Intel) chipsets with specifications, see Lantiq.

Bootlog

 • bootlog 
U-Boot 1.1.5-2.0 (Jan 24 2013 - 13:38:46)


 relocate_code start
 relocate_code finish.

 type is 00000001
 type is 0000007e
addr[0] = 227e
/n Detect flash id is bb  
Flash:  4 MB
In:    serial
Out:   serial
Err:   serial
Net:   Internal Clock
Selected EPHY_MODE 
AMAZON_SE Switch
Hit any key to stop autoboot:  4  3  2  1  0 
Checking Images Integrity ...
  Kernel: OK
  Rootfs: OK
## Booting image at b03744d0 ...
   Image Name:   MIPS Linux-2.4.31-Amazon_SE-3.6.
   Created:      2013-01-24   5:38:19 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    552170 Bytes = 539.2 kB
   Load Address: 80002000
   Entry Point:  8019a040
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK

Starting kernel ...

MC_PRIO = 0x0 -> 0xc0
flash_start=0xb0000000
flash_size=4194304l
CPU revision is: 0001906c
Primary instruction cache 8kB, physically tagged, 4-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, linesize 16 bytes.
Linux version 2.4.31-Amazon_SE-3.6.12-R0208V36 (uday@rdfwdev1.aztech.com) (gcc version 3.3.6) #107 Thu Jan 24 13:38:12 SGT 2013
Can't analyze prologue code at 8001e2a0
Determined physical RAM map:
User-defined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock1 ip=192.168.1.1:192.168.1.2::::eth0:on console=ttyS0,115200 ethaddr=00:0F:C9:12:9A:EE mem=16M panic=1 
ethaddr_setup: mac address  0- f-c9-12-9a-ee 
mips_hpt_frequency:133333333
r4k_offset: 00145855(1333333)
Using 133.333 MHz high precision timer.
[ifx_asc_init_hardware 1081]: ASC ID = 0x101044c4
[ifx_asc_init_hardware 1083]: TxFIFO size = 16, RxFIFO size = 16
[ifx_asc_init_hardware 1085]: TxFIFO CON = 0x1f01, RxFIFO CON = 0x1f01
Calibrating delay loop... 
266.24 BogoMIPS
MIPS CPU counter frequency is fixed at 133333333 Hz
Memory: 14268k/16384k available (1619k kernel code, 2116k reserved, 100k data, 80k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
amazon_se_dma_init
dma_chip_init
LSP Revision 1
Starting kswapd
Squashfs 2.2 (released 2005/07/03) (C) 2002-2004, 2005 Phillip Lougher
pty: 256 Unix98 ptys configured
ttyS0 at MEM 0xbe100c00 (irq = 66) is a IFX_ASC
Amazon_SE MEI version:2.04.00
cgu: misc_register on minor = 63

amazon_se_gptu_init:<6>gptu: totally 6 16-bit timers/counters
gptu: misc_register on minor 62
gptu: succeeded to request irq 25
gptu: succeeded to request irq 26
gptu: succeeded to request irq 27
gptu: succeeded to request irq 28
gptu: succeeded to request irq 29
gptu: succeeded to request irq 30
cgu_get_fpi_bus_clock(2) = 133333333, clock_divider = 1
bus clock = 5000000, clock_divider = 1

divider = 33333332
set_timer(0, 4000), divider = 33333332 
request_timer(0, 0x0000010D, 33333332)
reload value = 33333332
led: misc_register on minor = 151


Infineon CPE API Driver version: DSL CPE API V3.16.5
PPP generic driver version 2.4.2
amazon_se ETOP driver loaded!
Internal Clock
Selected EPHY_MODE 
oamk: init_module() called.
Opening oam kernel socket
oamk: init_module() returned.
ppe: ATM init succeeded (firmware version 1.1.0.2.1.13)
[init_amazon_se_mtd 371]: AMAZON_SE_EBU_CON 0x40000060, AMAZON_SE_EBU_CON0 0x1d2aa
init_amazon_se_mtd: start_scan_addr: b0000000
init_amazon_se_mtd: chip probing count 0
Amazon_se: probing address:b0000000
 Amd/Fujitsu Extended Query Table v1.3 at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
init_amazon_se_mtd: bank1, name:Amazon_se Bank 0, size:4194304bytes 
AMAZON_SE flash0: Using static image partition definition
Creating 2 MTD partitions on "Amazon_se Bank 0":
0x00000000-0x00010000 : "U-Boot"
0x00010000-0x00400000 : "RootFS,Kernel,Data,Environment"
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
GRE over IPv4 tunneling driver
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (128 buckets, 1024 max) - 360 bytes per conntrack
ip_conntrack_pptp version 1.9 loaded
ip_conntrack_rtsp v0.01 loading
ip_nat_pptp version 1.5 loaded
ip_nat_rtsp v0.01 loading
ip_tables: (C) 2000-2002 Netfilter core team
ipt_time loading
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
Amazon_Se Port Initialization
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 80k freed
init started:  BusyBox v1.00 (2013.01.24-05:25+0000) multi-call binary
init started:  BusyBox v1.00 (2013.01.24-05:25+0000) multi-call binary
Starting pid 11, console /dev/console: '/etc/init.d/rcS'
Algorithmics/MIPS FPU Emulator v1.5
Created character device /dev/amazon_se-port with major[254] and minor[0]
Created character device /dev/dsl_cpe_api with major[107] and minor[0]
Created character device /dev/ifx_mei with major[105] and minor[0]
:::: Breaking from 1st while loop
10_00_10_00_00_04_01_00
DSL_CPE: Using ADSL Modem is not ready!autostart script file - /etc/cmv_batch
DSL_CPE: using script notification file - /etc/rc.d/init.d/xdslrc.sh
DSL_CPE: using 1st firmware file - /firmware/modemhwe.bin
DSL_CPE: Device /dev/dsl_cpe_api opened successfully
Using /lib/modules/2.4.31-Amazon_SE-3.6.12-R0208V36/kernel/net/ifx_nfext/ifx_nfext_core.o
Using /lib/modules/2.4.31-Amazon_SE-3.6.12-R0208V36/kernel/net/ifx_nfext/ifx_nfext_ppp.o
Bringing up syslog
iptables: Chain already exists
iptables: Chain already exists


DSL_CPE: Parsing script file (/etc/cmv_batch)...
DSL_CPE: Parsing script file (/etc/cmv_batch)...
DSL_CPE: read info 103 1, value=1008, retCode=0
DSL_CPE: read optn 25 0, value=0201, retCode=0
Try `iptables -h' or 'iptables --help' for more information.
<6>device eth0 entered promiscuous mode
br0: port 1(eth0) entering learning state
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating
DAS 855
[src/IFIN_MgmtServer.c:StartTimer:183] Started Periodic Inform Timer-> ID = 1
IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.Instances Num=1
ifx_ds_get_exact_name : Node not found
tree_add_instance 423 : clash in instance found : exiting
ifx_ds_add_object 888 : failure in adding instance
IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.IncludeXMLVerString Num=1
IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.IncludeSOAPAction Num=1
IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.DeviceInfo.Manufacturer Num=4
/tmp/version File does not exit

 Enable successfull 

 Enable successfull 
Kernel:2.4.31-Amazon_SE-3.6.12-R0208V36

 Enable successfull 

 Enable successfull 

 Enable successfull 

 Enable successfull 
nReturn=0

writing 0x80000010 into address 0x1e104114

+---------------------------------------------------+
| Linux/MIPS on AMAZON_SE by Infineon COM AC BB_CPE |
+---------------------------------------------------+
Starting pid 1071, console /dev/console: '/sbin/getty'

Bringup wan started for wan index 1 !!
BOOTLoader:1.1.5-2.0
CPU:AMAZON_SE-v1.2
BSP:1.3.1.1-patch2
Firmware:FW Version: 3.4.6.8.1.2
Software:Amazon_SE-3.6.12-R0208V36-1338-24Jan13
Tool Chain:lxdb-1-3-2/3.3.6/0.9.28
IFX_ContGetParamValues:1574 Calling InternetGatewayDevice.X_000319_IFX.ACSGetRPC Num=4
iReason = 3, state = 0, RetryCnt = 0
Blocking on Select()...

mac clone
0
pppoe_mac_addr

Amazon_SE login: :::::
Wan mac addr 1
00:0F:C9:12:9A:EF
open ATM itf = 0, vpi = 1, vci = 32, ret = 0

Amazon_SE login: rCreated interface nas0 <---> WAN1 !!
odevice nas0 entered promiscuous mode
br0: port 2(nas0) entering learning state
ot
Password: Warning: Using /etc/hosts will be removed in a future version. Please use only the /etc/dnrd/master file or use -m off.
br0: port 2(nas0) entering forwarding state
br0: topology change detected, propagating



BusyBox v1.00 (2013.01.24-05:25+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

Images

  • internal

  • board top

  • board top (shield removed)

  • board bottom

Retrieved from "https://wikidevi.wi-cat.ru/index.php?title=Allnet_ALL0333CJ&oldid=381718"