B-LINK BL-WR3000
LB-LINK BL-WR3000
FCC approval date: 30 January 2015
Country of manuf.: China
Type: wireless router
FCC ID: S8J-WR3000
Power: 9 VDC, 0.6 A
Connector type: barrel
CPU1: Broadcom BCM5357C0 (300 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Winbond Model?)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond Model?)
Expansion IFs: none specified
JTAG: yes, 5-pad header
Serial: yes, 4-pad header
WI1 chip1: Broadcom BCM5357C0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM5357C0
Switch: Broadcom BCM5357C0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: LB-LINK_XXXXXX
Default IP address: 192.168.16.1
the IP 192.168.16.1 is used by 8 additional devices
of which 3 are LB-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1321 additional devices
of which 1 are LB-LINK devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
300Mbps Wireless N Router
- Product page (LB-LINK)
"BL-R5357BF1" and "VER1.1" is silkscreened on the board in the FCC photos.
The sample SSID in B-LINK's manual is B-LINK_90E09F, indicating that
- the default SSID pattern is B-LINK_XXXXXX (w/ upper case hex digits)
- .. this is presumed to be correct.
WiGLE shows that two uses of this format w/ the B-LINK_9XXXXX pattern
- are using 44:33:4C (Shenzhen Billian Electronic) OUIs.
- This is also presumed to be used...
Additional specifications, per the Shenzhen Billian Electronic site, follow...
- Dimensions: 185 mm x 123 mm x 177 mm
