Belkin F7D7602 v2
Belkin F7D7602 v2
Availability: now
FCC approval date: 12 February 2014
Country of manuf.: China
Type: camera
FCC ID: K7SF7D7602V2
IC ID: 3623A-F7D7602V2
PCB ID: 75076230
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: MediaTek MT7620A (580 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond Model?)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Brand? DDR2)
Expansion IFs: none specified
Serial: yes, 4-pin header, internal, unpopulated, 3.3V TTL
WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
bgn
Additional chips
Multimedia Processor;AIT;AIT8433T;;1;
Mono Audio Codec;Nuvoton;NAU8810YG;;1;
Default SSID: NetCamHDXXXX (1 addl. devices)
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Belkin F7D7602 v1 | Ralink | Ralink | |
Belkin F7D7602 v2 | MediaTek | MediaTek |
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
NetCam HD+
"75076230", "2013-09-17", and "REV A3" is silkscreened
- on the board in the FCC photos.
Also per the FCC photos, this device is using...
- the MediaTek MT7620A WiSoC
- a Winbond 16MB Flash chip
- an AIT AIT8433T Multimedia Processor
- a Nuvoton NAU8810YG Mono Audio Codec
Per the FCC label and the example label in the external photos...
- the device has a default setup SSID pattern of NetCamHDXXXX
- (where XXXX appears to be the last 4 digits of the wireless
- interface MAC [upper case letters])
- a EC:1A:59 OUI is shown
Probable used PSU(s)
The power supply shown used in the FCC external photos is a
- Belkin-branded DVE DSA-5PFE-05 FUS 050100.
DVE DSA-5PFE-05 FUS 050100 (more) | |||||
---|---|---|---|---|---|
Input: 100-240 VAC ~ 50/60 Hz, 0.2 A | |||||
Input connector: NEMA 1-15P Style: small, horiz. Eff. level: 3 | |||||
Output: 5 VDC, 1 A | |||||
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ?? |