Alcatel-Lucent RG200E-CA (China Telecom)
Alcatel-Lucent RG200E -CA (China Telecom)
Availability: only China
Manuf (OEM/ODM): SGE GRWNV5.IT111C -B1
Country of manuf.: China
Type: wireless router, analog phone gateway
Power: 12 VDC, 1.25 A
Connector type: barrel
CPU1: Broadcom BCM5358UB0 (530 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Macronix MX25L12845EMI-10G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Mira P3R12E4JFF-G8E)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Broadcom BCM5358UB0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM5358UB0
Switch: Broadcom BCM5358UB0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: ChinaNet-XXXX (1 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1297 additional devices
of which 1 are Alcatel-Lucent devices
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Residential Gateway 200E-CA
- "GRWNV5.IT111C-B1" and "REV1.0" is silkscreened on the board.
- ChinaNet-XXXX SSID, 18:80:F5 OUI (Alcatel-Lucent Shanghai Bell Co., Ltd)
- pre-defined: WPA/WPA2 key, login password, login name useradmin ?
- On the DD-WRT forums (CFE and default NVRAM values dump)
- The device has a RJ11 jack for VoIP.
- Sources seem to indicate the device uses BCM5358 (BCM5358UB0)
Per this forum post containing the CFE boot log, CPU type 0x19749: 530MHz
- this matches with Netgear WNDR3400v2's log, which uses a BCM5358UB0
