Compex WPJ563

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Compex WPJ563
Availability: now

(Est.) release date: 25 October 2016
Country of manuf.: China

Type: wireless embedded board

Power: 12 VDC, ? A

CPU1: Qualcomm Atheros QCA9563 (775 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Brand? Model?)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (EtronTech Model?)

Expansion IFs: Mini PCIe, SIM Card slot
Mini PCIe slots: 1
JTAG: yes, 14-pin header
Serial: yes, 4-pin header

WI1 chip1: Qualcomm Atheros QCA9563
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL


Stock FW OS: Linux CompexWRT

TPFirmware supported: OpenWrt • (List | Dev | DLs)

802dot11 OUI: none specified

For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

2.4GHz 3×3 Wireless Embedded Board with MiniPCI-e Slot

Product page
Order Sample Here


  • Qualcomm Atheros QCA9563 @775MHz Networking Processor
  • Dual Radio Solution (on-board bgn radio and 1 miniPCIe slot
that supports all Compex WLE series, including 802.11ac radio)
  • Integrated 48V 802.3af (alternative 24V PoE available)
  • Supported CompexWRT and OpenWRT firmware
  • Support 2 x Gigabit Ethernet Port


  • Qualcomm Atheros QCA9563 74Kc MIPS processor, Dragonfly Series
  • 64KB I-Cache and 32 KB D-Cache, targeted to operate at 775MHz
  • 128MB System Memory
  • 16MB NOR Flash
  • 3×3 On-board 2.4GHz radio, up to 450Mbps physical data rate
  • Supports Dynamic Frequency Selection (DFS)
  • Single SIM Holder on-board
  • Support 2 x Gigabit Ethernet Port


  • 802.11g/n + 802.11a/n/ac Access Point
  • Point-to-MultiPoint High Capacity Wireless Bridge
  • Wireless Customer-Premises Equipment (CPE)