CradlePoint MBR1400 v2

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

CradlePoint MBR1400 v2
Availability: now


FCC approval date: 05 December 2012
Country of manuf.: Taiwan

Type: wireless router

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Ralink RT3883F (500 MHz)
FLA1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Macronix MX29GL256EHT2I-90Q)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W9751G6JB-25 × 2)

Expansion IFs: USB 2.0, ExpressCard/34 (USB)
ExpressCard slots: 2
USB ports: 3

WI1 chip1: Ralink RT3883F
WI1 802dot11 protocols: abgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL, RP-SMA

ETH chip1: Ralink RT3883F
Switch: Atheros AR8327
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1


Default SSID: MBR1400-XXX (1 addl. devices)
Default IP address:
the IP is used by 768 additional devices
of which 10 are CradlePoint devices
Default login user: blank
Default login password: randomly generated
blank:randomly generated credentials used by 1 additional devices
of which 0 are CradlePoint devices

802dot11 OUI: none specified

For a list of all currently documented Ralink chipsets with specifications, see Ralink.

"WRT-795L Rev. UC" is silkscreened on the board in the FCC photos.

The device is using a Genesys Logic GL850G USB 2.0 hub controller.

The default SSID pattern for this device is assumed to be MBR1400-xxx

(w/ 00:30:44 OUI).. the same as the MBR1400 v1.

It is pictured as such on the FCC sample label and described as such

in the FCC manual.