Ctek G6200 NetServer

Ctek G6200 NetServer

Country of manuf.: USA

Type: automation controller

Power: 9-24 VDC, ? A
Connector type: terminal block

CPU1: Atmel AT91SAM9G20 (202 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Atmel 45DB642D-CNU)
FLA2: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Micron Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (AMIC A43L4616AV-7UF × 2)

Expansion IFs: USB 2.0
USB ports: 2
Serial: yes, DE-9, (38400,8,N,1), ttyS2

ETH chip1: Atmel AT91SAM9G20
ETH chip2: Davicom DM9161
ETH chip3: SMSC LAN9500i
LAN speed: 100M
LAN ports: 2

Additional chips
Serial Port Transceiver;Analog Devices;ADM3311;;2;
5V Low Power EIA RS-485 Transceiver;Analog Devices;ADM485;;2;

Stock bootloader: U-Boot 2009.06

Stock FW OS: Linux 2.6.27

Flags: Micro SD Card slot, RTC w/ battery, RS232, RS485

Default IP address: 192.168.1.10
the IP 192.168.1.10 is used by 6 additional devices
of which 0 are Ctek devices
Default login user: root
Default login password: pass

Ethernet OUI: 00:06:EB

For a list of all currently documented Atmel chipsets with specifications, see Atmel.

---

G6200 Series NetServer

Product page

Hardware specification

• CPU: Atmel AT91SAM9G20 @ 202 MHz
• Memory: 64MB
• Onboard Storage: 8MB SPI NOR, 256MB NAND, MicroSD
• Network: 2x FE
• USB: 1x USB 2.0 Host, 1x USB Device
• Serial: 2x RS232, 2x RS485