D-Link DIR-501 rev A1
D-Link DIR-501 A1
Manuf (OEM/ODM): Alpha Networks WRG-N40
Type: wireless router
FCC ID: KA2IR501A1
IC ID: 4216A-IR501A1
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196C
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Winbond 25Q16BVSIG)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W9812G6IH-6)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8188RE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Realtek RTL8196C
Switch: Realtek RTL8196C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Default SSID: dlink (38 addl. devices)
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 781 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 338 additional devices
of which 180 are D-Link devices
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Wireless N 150 Router
Support page
Checkboxes with "1WRGN35...A1" and "1WRGN40...A1L" are silkscreened to the front of the board.
"1WRGN40...A1G" is printed on a label affixed to the board.
"8WRGN40..1A1G" is silkscreened on the board in the FCC photos.
The power adapter included with the device is an AMIGO AMS47-0501000FU (5V, 1.0A).
Images
- external
angled
bottom
back
power adapter
- internal
board top
Flash chip
RTL8188RE chip
