D-Link DIR-600L rev A1
D-Link DIR-600L A1
Manuf (OEM/ODM): Alpha Networks WRG-N40
FCC approval date: 18 January 2012
(Est.) release date: 02 March 2012
UPC: 790069373596 (UPC DB, On eBay)
Country of manuf.: China
Type: wireless router
FCC ID: KA2IR600LA1
IC ID: 4216A-IR600LA1
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196C (390 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Winbond 25Q32BVSIG)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond W9825G6JH-6)
Expansion IFs: none specified
JTAG: yes, 12-pin header, JP1, unpopulated, labeled JTAG
Serial: yes, 4-pin header, JP2, unpopulated, 3.3V TTL, (38400,8,N,1)
WI1 chip1: Realtek RTL8188RE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none
ETH chip1: Realtek RTL8196C
Switch: Realtek RTL8196C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Stock FW OS: Linux 2.4.18
Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices
802dot11 OUI: 14:D6:4D (9 E, 9 W), C8:D3:A3 (4 E, 5 W)
Ethernet OUI: 14:D6:4D (9 E, 9 W), C8:D3:A3 (4 E, 5 W)
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
D-Link DIR-600L rev A1 | Realtek | Realtek | |
D-Link DIR-600L rev B1 | Realtek | Realtek |
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
Wireless N150 Home Cloud Router
"8WRGN40..0B2Z" and a checkbox for the below Alpha Networks
- parts is silkscreened on the board.
- 1WRGN35...A1L
- 1WRGN40...A1L
- 1WRGN40...B1L
- 1DIR600N..B2Z
Possible OUI of 14:D6:4D (it's printed on a label in the FCC photos)
- Appears to be running Linux 2.4.18 Kernel
Serial
- PCB Has an unpopulated 12-pin header marked JP2
- - JTAG, unknown pinout
- and a unpopulated 4-pin header marked JP1
- - UART Serial (3.3v TTL)
Pinout
(Square = 1st, Left -> Right) © ® © © Rx Vcc GND Tx
Terminal settings: 8N1 @ 38400 / Flow Control: None
Serial port can be connect with USB TO COM PL2303HX adapter.
- Just connect 3 pin Rx, Tx and GND.
Set the baudrate at 38400, and connect Rx pin of adapter to Tx pin of router,
- Tx pin of adapter to Rx pin of router, GND of adapter to GND of router.
Hidden WebUI pages
These do not appear to be listed anywhere on the WebUI.
- Run system commands: *IP*/shell.asp
- Guest Access / Virtual AP Settings: *IP*/Advanced/Guest_Zone.asp
Boot log
• boot log |
---|
OK OK 4.Winbond SPI (4 MByte)! kldat 2011.12.07-18:31+0900 version v2.8.1f [16](390M) Jump to 0x80500000... decompressing kernel: Uncompressing Linux... done, booting the kernel. done decompressing kernel. Creating 4 MTD partitions on "Physically mapped flash": 0x00000000-0x000e0000 : "boot+cfg+linux" master size 0x004000000x000e0000-0x00330000 : "root fs" master size 0x004000000x00330000-0x00380000 : "webpage" master size 0x004000000x00380000-0x00400000 : "mydlink" master size 0x00400000RTL8192C/RTL8188C driver version 1.9 (2011-03-08) init started: BusyBox v1.01 (2012.11.21-02:25+0000) multi-call binary Starting pid 9, console /dev/ttyS0: '/bin/sh' BusyBox v1.01 (2012.11.21-02:25+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. 57 mount: Mounting /dev/mtdblock2 on /web-lang failed: Invalid argument Start service ->: [all] mount: Mounting /dev/mtdblock2 on /web-lang failed: Invalid argument mount: Mounting /dev/mtdblock3 on /mydlink failed: Device or resource busy init start config check init get mode exec log script system reinit Initialize wlan0 interface set 615 wlan channel Initialize wlan0-va0 interface Setup BRIDGE interface SIOCGIFFLAGS: No such device bridge br0 doesn't exist; can't delete it Setup bridge... route: SIOC[ADD|DEL]RT: No such process route: SIOC[ADD|DEL]RT: No such process route: SIOC[ADD|DEL]RT: No such process route: SIOC[ADD|DEL]RT: No such process route: SIOC[ADD|DEL]RT: No such process route: SIOC[ADD|DEL]RT: No such process route: SIOC[ADD|DEL]RT: No such process route: SIOC[ADD|DEL]RT: No such process route: SIOC[ADD|DEL]RT: No such process WiFi Simple Config v2.7-wps2.0 (2012.11.21-09:27+0000). Setup WAN interface MiniIGD v1.08 (2012.01.04-11:20+0000). /proc/wan_if: cannot create killall: netbios: no process killed killall: llmnresp: no process killed [: 0: unknown operand Start telnetd ... 0DevInfo.txt text mode! hard ver isA1 1452 boa: server version Boa/0.94.14rc21 boa: server built Nov 21 2012 at 17:27:46. boa: starting server pid=1451, port 80 killall: mydlink-watch-dog.sh: no process killed killall: signalc: no process killed killall: tsa: no process killed opt.local stop ok. opt.local start ok. 1497 # iptables: Bad rule (does a matching rule exist in that chain?) iptables: Bad rule (does a matching rule exist in that chain?) killall: dnsmasq: no process killed killall: proxyd: no process killed Read configuration file /etc/proxyd.conf... iptables: Bad rule (does a matching rule exist in that chain?) smart404 stop ok. Read url configuration file /etc/proxyd_url.conf... Start http proxy server... Start server at br0 port 5449 |
Images