D-Link DIR-600 rev B2

From WikiDevi.Wi-Cat.RU
(Redirected from D-Link DIR-600 rev B1/B2)
Jump to navigation Jump to search

D-Link DIR-600 B1/B2

Manuf (OEM/ODM): Alpha Networks WRG-N23

FCC approval date: 28 April 2009

Type: wireless router

FCC ID: KA2DIR300B1

Power: 5 VDC, 1.2 A
Connector type: barrel

CPU1: Ralink RT3050 (320 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320DBTI-70G)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (ProMOS V54C3256164VDI7)

Expansion IFs: none specified

WI1 chip1: Ralink RT3050
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: none

ETH chip1: Ralink RT3050
Switch: Ralink RT3050
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

TPFirmware supported: DD-WRT • (List)

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 344 additional devices
of which 180 are D-Link devices

802dot11 OUI: 1C:7E:E5 (6 E, 6 W)
Ethernet OUI: 1C:7E:E5 (6 E, 6 W)

For a list of all currently documented Ralink chipsets with specifications, see Ralink.


On the DD-WRT supported devices table

Device page in DD-WRT wiki

DD-WRT Screenshot on the DD-WRT forums (showing 1C:7E:E5 OUI)

Device page in OpenWRT wiki

On the OpenWrt forums

DIR-600 H/W rev. B1 hardware are same as in D-Link DIR-300 rev B1

How to open the DIR-600 (see pictures): Remove the two mounting screws that are located under the rubber paddings. The top cover is secured by 4 latches on three sides. Use a flat head screw driver to open the latches to the left and right, then lift off the top cover. Be gentle with these latches as they can break very easily.

Images

from User:Zerohero