D-Link DIR-605L rev B1

D-Link DIR-605L B1
Availability: EoL

Manuf (OEM/ODM): Alpha Networks

FCC approval date: 16 April 2013
Country of manuf.: China

Type: wireless router

FCC ID: KA2IR605LB1
IC ID: 4216A-IR605LB1

Power: 5 VDC, 1 A
Connector type: barrel

CPU1: Realtek RTL8196E (400 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25L3206E)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond Model?)

Expansion IFs: none specified

WI1 chip1: Realtek RTL8192ER
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Realtek RTL8196E
Switch: Realtek RTL8196E
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 797 additional devices
of which 220 are D-Link devices
Default login user: admin
Default login password: blank
admin:blank credentials used by 353 additional devices
of which 180 are D-Link devices

802dot11 OUI: none specified

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
D-Link DIR-605L rev A1	Realtek	Realtek
D-Link DIR-605L rev B1	Realtek	Realtek
D-Link DIR-605L rev B2	Realtek	Realtek

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

---

Wireless N 300 Cloud Router

"8WRGN…6..2B1G", "WRG…6", "11/b/g/n Wireless Router", and "REV …1"

is silkscreened on the board in the FCC photos.

• On OpenWrt forum

Serial

Expand • boot log • >>

Booting... OK OK --- RealTek (RTL8196E-kld) version v6.0.4e (2013.02.22-18:00+0800) [16bit](400MHz) Jump to image start=0x80500000... decompressing kernel: Uncompressing Linux... done, booting the kernel. done decompressing kernel. Creating 4 MTD partitions on "Physically mapped flash": master size 0x004000000x00000000-0x000e0000 : "boot+cfg+linux" master size 0x004000000x000e0000-0x00370000 : "root fs" master size 0x004000000x00370000-0x00380000 : "webpage" master size 0x004000000x00380000-0x00400000 : "mydlink" Realtek WLAN driver - version 1.6 (2012-12-24) init started: BusyBox v1.01 (2013.07.08-06:02+0000) multi-call binary Starting pid 9, console /dev/ttyS0: '/bin/sh' BusyBox v1.01 (2013.07.08-06:02+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. 54 Init Start... mkdir: Cannot create directory `/var/system': File exists iwpriv wlan0 set_mib tx_pwr_ctrl=0 set 615 wlan channel iwpriv wlan0 write_mem dw,b8000048,1,4026d832 Init bridge interface... DO 8192E IQK !!!! Done 8192E IQK !!!! Init Wlan application... WiFi Simple Config v2.7-wps2.0 (2013.07.12-00:49+0000). Init WAN Interface... MiniIGD v1.08 (2012.01.04-11:20+0000). sysconf: setfirewall here start mydlink killall: mydlink-watch-dog.sh: no process killed killall: signalc: no process killed killall: tsa: no process killed opt.local restart ok. Start NTP daemon 0 DevInfo.txt text mode! hard ver is <B1> 462 boa: server version Boa/0.94.14rc21 boa: server built Jul 12 2013 at 08:48:47. boa: starting server pid=461, port 80 killall: tsa: no process killed opt.local restart ok. Start NTP daemon 0 DevInfo.txt text mode! hard ver is <B1> 462 boa: server version Boa/0.94.14rc21 boa: server built Jul 12 2013 at 08:48:47. boa: starting server pid=461, port 80 killall: tsa: no process killed opt.local stop ok. opt.local start ok. 508 #

See also

• AboCom WP102 • Realtek RTL8181 (MQ4-WP102)
• ASUS WL-330NUL • Realtek RTL8196EU

+ RTL8188ER, 16MB Flash, 32MB RAM

• Netgear JNR1010 • Realtek RTL8196C
• Netgear WNR1500 • Realtek RTL8196C
• ipTIME A2004NS • Realtek RTL8197D
• TOTOLINK A2004NS • Realtek RTL8197D
• UPVEL UR-825AC • Realtek RTL8197DN
• Netis WF2780 • Realtek RTL8197DN
• D-Link DIR-825 rev E1 • Realtek RTL8197DN
• Wavlink WL-WN527A2 • Realtek RTL8197DN

+ RTL8367RB + RTL8192ER + RTL8812AR