D-Link DIR-802 rev A1

D-Link DIR-802 A1

Manuf (OEM/ODM): Alpha Networks WRG-AC08

FCC approval date: 23 October 2013
Country of manuf.: China

Type: wireless router

FCC ID: KA2IR802A1
IC ID: 4216A-IR802A1

Power: 5 VDC, 1 A
Connector type: barrel

CPU1: Realtek RTL8881AQ
FLA1: ? MiB (Macronix Model?)
RAM1: 64 MiB 67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6KB-25)

Expansion IFs: none specified
Serial: yes, 3.3V TTL

WI1 chip1: Realtek RTL8881AQ
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL
WI2 chip1: Realtek RTL8188ER
WI2 802dot11 protocols: bgn
WI2 MIMO config: 1x1:1
WI2 antenna connector: none

ETH chip1: Realtek RTL8881AQ
Switch: Realtek RTL8881AQ
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

abgn+ac

Default IP address: 192.168.0.1
the IP 192.168.0.1 is used by 785 additional devices
of which 220 are D-Link devices
Default login user: Admin
Default login password: blank
Admin:blank credentials used by 84 additional devices
of which 79 are D-Link devices

802dot11 OUI: none specified

For a list of all currently documented Realtek chipsets with specifications, see Realtek.

---

Wireless AC600 Dual Band Router

"8WRGAC08.0A1G" ( + PCB manuf. text and 1316 date code) is silkscreened on the bottom of the board in the FCC photos. "WRGAC08" is silkscreened on the top of the board.

The Realtek 11ac WiSoC used would appear to be RTL8881AQ.

The Realtek single-stream 11bgn IC would appear to be RTL8188RE.

Default credentials are per the FCC manual.

Default SSID formats may be dlink-XXXX and dlink-XXXX-5GHz.

The two power adapters shown in the FCC external photos are...

• a GLOBAL YEOU DIANN ELECTRIC INDUSTRIAL CO., LTD. AMS47-0501000FU (100-240VAC ~ 50/60Hz, 0.2A/15VA -> 5VDC, 1A)
• a Shenzhen Frecom Electronics Co., Ltd. F05W-050100SPAU (100-240VAC ~ 50/60Hz, 190mA -> 5VDC, 1A)