D-Link DWR-118 rev B1

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

D-Link DWR-118 B1
Availability: common

Manuf (OEM/ODM): Alpha Networks WRG-AC52 REV-A1

(Est.) release date: February 2017
Country of manuf.: China
Series: AC750

Amazon image

ASIN
B00PVDD7C4 (Flag of the United Kingdom (1-2).svg, On Amazon, On CCCmultiple uses)
multiple revisions of this device, use caution

Type: wireless router

Power: 12 VDC, 1 A
Connector type: barrel

CPU1: Realtek RTL8881AM (520 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6433F)
RAM1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Realtek RTL8881AM)

Expansion IFs: USB 2.0
USB ports: 1
Serial: yes, 4-pin header, (38400,8,N,1), JP1

WI1 chip1: Realtek RTL8881AM
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL
WI2 chip1: Realtek RTL8192ER
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: soldered

ETH chip1: Realtek RTL8881AM
ETH chip2: Realtek RTL8211E
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

abgn+ac

Stock FW OS: Linux 2.6.30.9

Default SSID: DWR-118_XXXXXX (1 addl. devices)
, DWR-118_5GHz_XXXXXX (1 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 28 are D-Link devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 75 are D-Link devices

802dot11 OUI: A0:AB:1B (2 E, 2 W)
Ethernet OUI: A0:AB:1B (2 E, 2 W)

 CPU1 brandWI1 chip1 brandWI2 chip1 brand
D-Link DWR-118 rev A1MediaTekMediaTekMediaTek
D-Link DWR-118 rev A2MediaTekMediaTekMediaTek
D-Link DWR-118 rev B1RealtekRealtekRealtek

For a list of all currently documented Realtek chipsets with specifications, see Realtek.


Wireless AC750 Dual-Band Multi-WAN Router

Product page

Ports:

  • WAN: 1x FE (10/100) ports
  • LAN: 3x FE (10/100) + 1x GbE (10/100/1000) ports
  • USB: 1x USB 2.0 (3G/4G LTE modem backup support)

Antennas:

  • 2x external 5dBi antennas (2.4/5GHz)
  • 1x internal 5dBi antenna (2.4GHz)

Serial

  • JP1 - 4-pin header (38400, 8N1)

Boot log

 • Boot log • >>
Booting...

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
@
@ chip__no chip__id mfr___id dev___id cap___id size_sft dev_size chipSize
@ 0000000h 0c22017h 00000c2h 0000020h 0000017h 0000000h 0000017h 0800000h
@ blk_size blk__cnt sec_size sec__cnt pageSize page_cnt chip_clk chipName
@ 0010000h 0000080h 0001000h 0000800h 0000100h 0000010h 000002dh MX25L6405D
@
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Input : CLK_SEL=0x00000004, DIV=0x00000000
Now CPU Speed=500

ALPHA board: WRGAC52

SVN revision: 1233

---RealTek(RTL8881A)at 2016.05.19-09:40+0800 v1.0 [16bit](520MHz)
addr=(393216)
verify_seama: data=0x81100000, size=7843936
SEAMA ==========================================
  magic      : 5ea3a417
  meta size  : 36 bytes
  meta data  : dev=/dev/mtdblock/5
  meta data  : type=firmware
  meta data  :
  meta data  :
  image size : 7843872 bytes
  checksum   : 5D041D48B1FED83E38BFAD025E73DBB2
  digest     : 5D041D48B1FED83E38BFAD025E73DBB2
  Selected !!!
================================================
ret=(1)
Jump to image start=0x80000400...
CPU revision is: 0000dc02
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
Zone PFN ranges:
  Normal   0x00000000 -> 0x00004000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0: 0x00000000 -> 0x00004000
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 16256
Kernel command line: console=ttyS0,38400 root=/dev/mtdblock6 mtdparts=flash_bank_1:64k(u-boot)ro,64k(mfcdata),64k(devconf),128k(langpack),64k(caldata),7808k(upgrade),8m@0(rootfs)ro
icache: 16kB/32B, dcache: 8kB/32B, scache: 0kB/0B
NR_IRQS:48
PID hash table entries: 256 (order: 8, 1024 bytes)
console handover: boot [early0] -> real [ttyS0]
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 51300k/65536k available (3955k kernel code, 14164k reserved, 1353k data, 124k init, 0k highmem)
Calibrating delay loop... 519.37 BogoMIPS (lpj=2596864)
Mount-cache hash table entries: 512
net_namespace: 1012 bytes
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver huawei_ether
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
NET: Registered protocol family 1
RTL GPIOC major 0
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.11)
msgmni has been set to 100
io scheduler noop registered
io scheduler cfq registered (default)
HDLC line discipline: version $Revision: 4.8 $, maxframe=4096
N_HDLC line discipline registered.
Realtek GPIO Driver for Flash Reload Default
Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x18002000 (irq = 8) is a 16550A
Driver 'sd' needs updating - please use bus_type methods
Driver 'sr' needs updating - please use bus_type methods
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
PPP BSD Compression module registered
MPPE/MPPC encryption/compression module registered
NET: Registered protocol family 24
PPTP driver version 0.7
PPPoL2TP kernel driver, V1.0
usbcore: registered new interface driver cdc_ether
usbcore: registered new interface driver qmi_wwan
GobiNet: 2011-07-29-1026
usbcore: registered new interface driver GobiNet
retval=0
cdc_ncm: 7-Feb-2011
usbcore: registered new interface driver cdc_ncm
Realtek WLAN driver - version 1.6 (2013-02-21)(SVN:62529M)
Adaptivity function - version 7.1

**********************************

** NOTE!! RTL8881A INTERNAL PA!    **

**********************************


#######################################################
SKB_BUF_SIZE=3200 MAX_SKB_NUM=480
#######################################################


**********************************

** NOTE!! RTL8881A INTERNAL PA!    **

**********************************

**********************************

** NOTE!! RTL8881A INTERNAL PA!    **

**********************************

**********************************

** NOTE!! RTL8881A INTERNAL PA!    **

**********************************

**********************************

** NOTE!! RTL8881A INTERNAL PA!    **

**********************************

**********************************

** NOTE!! RTL8881A INTERNAL PA!    **

**********************************
Find Port=0 Device:Vender ID=818b10ec


#######################################################
SKB_BUF_SIZE=3200 MAX_SKB_NUM=480
#######################################################




Probing RTL8186 10/100 NIC-kenel stack size order[3]...
chip name: 8196C, chip revid: 0
NOT YET
eth0 added. vid=9 Member port 0x1...
eth1 added. vid=8 Member port 0x10...
eth2 added. vid=9 Member port 0x2...
eth3 added. vid=9 Member port 0x4...
eth4 added. vid=9 Member port 0x8...
eth5 added. vid=9 Member port 0x0...
[peth0] added, mapping to [eth1]...
SPI INIT
 ------------------------- Force into Single IO Mode ------------------------
|No chipID  Sft chipSize blkSize secSize pageSize sdCk opCk      chipName    |
| 0 c22017h  0h  800000h  10000h   1000h     100h   50    0   MX6405D/05E/45E|
 ----------------------------------------------------------------------------
SPI flash(MX6405D/05E/45E) was found at CS0, size 0x800000
[drivers/mtd/maps/rtl819x_flash.c init_rtl8196_map 366]
7 cmdlinepart partitions found on MTD device flash_bank_1
flash_bank_1: the flash image has SEAMA header
flash_bank_1: squashfs filesystem found at offset 0x00210060
Creating 8 MTD partitions on "flash_bank_1":
0x000000000000-0x000000010000 : "u-boot"
0x000000010000-0x000000020000 : "mfcdata"
0x000000020000-0x000000030000 : "devconf"
0x000000030000-0x000000050000 : "langpack"
0x000000050000-0x000000060000 : "caldata"
0x000000060000-0x000000800000 : "upgrade"
0x000000210060-0x0000007db060 : "rootfs"
0x000000000000-0x000000800000 : "flash"
usbmon: debugfs is not available
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
b8021000=10000001
b8021054=200000
reg e0=b1
reg e1=ae
reg e2=9e
reg e3=2d
reg e4=1
reg e5=93
reg e6=c8
reg e7=11
reg f0=fc
reg f1=8c
reg f2=0
reg f3=11
reg f4=9b
reg f5=e7
reg f6=0
rtl8652-ehci rtl8652-ehci.0: RTL8652 On-Chip EHCI Host Controller
rtl8652-ehci rtl8652-ehci.0: new USB bus registered, assigned bus number 1
read synopsys=0
read synopsys2=0
rtl8652-ehci rtl8652-ehci.0: irq 10, io base 0x18021000
rtl8652-ehci rtl8652-ehci.0: USB 0.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: RTL8652 On-Chip EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.30.9 ehci_hcd
usb usb1: SerialNumber: rtl8652-ehci.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
rtl8652-ohci rtl8652-ohci.0: RTL8652 OHCI
rtl8652-ohci rtl8652-ohci.0: new USB bus registered, assigned bus number 2
rtl8652-ohci rtl8652-ohci.0: irq 10, io mem 0x18020000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: RTL8652 OHCI
usb usb2: Manufacturer: Linux 2.6.30.9 ohci_hcd
usb usb2: SerialNumber: rtl8652
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver usbserial
USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial Driver core
USB Serial support registered for GSM modem (1-port)
usbcore: registered new interface driver option
option: v0.7.2:USB Driver for GSM modems
u32 classifier
nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
xt_time: kernel timezone is -0000
BCM fast NAT: INIT
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
Netlink[Kernel] create socket for igmp ok.
Realtek FastPath:v1.03
VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
Freeing unused kernel memory: 124k freed
init started: BusyBox v1.14.1 (2017-02-09 14:44:55 CST)
starting pid 269, tty '': '/etc/init.d/rcS'
[/etc/init.d/S10init.sh]
[/etc/init.d/S15udevd.sh]
[/etc/init.d/S16ipv6.sh]
[/etc/init.d/S19devfs.sh]
[/etc/init.d/S19init.sh]
[/etc/init.d/S20init.sh]
  DEFNODE[/etc/defnodes/S11devdata.xml]
  DEFNODE[/etc/defnodes/S12devdata.php]
  DEFNODE[/etc/defnodes/S12flashspeed.php]
  DEFNODE[/etc/defnodes/S13dfs.php]
  DEFNODE[/etc/defnodes/S14setchlist.php]
  DEFNODE[/etc/defnodes/S20device.xml]
  DEFNODE[/etc/defnodes/S22timezone.php]
[/etc/scripts/setdate.sh] 01/01/2000 ...
Sat Jan  1 01:00:13 GMT 2000
  DEFNODE[/etc/defnodes/S30device.php]
  DEFNODE[/etc/defnodes/S30device.xml]
  DEFNODE[/etc/defnodes/S31diagnostic.xml]
  DEFNODE[/etc/defnodes/S31locale.php]
  DEFNODE[/etc/defnodes/S33wifi.php]
  DEFNODE[/etc/defnodes/S40device.xml]
  DEFNODE[/etc/defnodes/S40links.php]
  DEFNODE[/etc/defnodes/S41case.php]
  DEFNODE[/etc/defnodes/S90sessions.php]
  DEFNODE[/etc/defnodes/S90upnpigd.php]
  DEFNODE[/etc/defnodes/S90upnpwfa.php]
  DEFNODE[/etc/defnodes/S91upnpigd2.php]
SERVD: start service [LOGD]
[/etc/init.d/S21usbmount.sh]
[/etc/init.d/S23udevd.sh]
[/etc/init.d/S45gpiod.sh]
[/etc/init.d/rcS] done!
Factory reset time : 5 secs
00: [WPS Button] using GPIO #3, input mode.
01: [Factory Reset Button] using GPIO #4, input mode.
02: [Power_Status LED Green] using GPIO #13, output mode.
03: [Power_Status LED Amber] using GPIO #13, output mode.
04: [Internet Status LED Green] using GPIO #12, output mode.
05: [USB Status LED Green] using GPIO #11, output mode.
06: [WAN_LED] using GPIO #14, output mode.
07: [LAN_LED] using GPIO #10, output mode.
08: [USB_POWER_CTL] using GPIO #2, output mode.
[/etc/init0.d/S21layout.sh]: start ...
SERVD: start service [LAYOUT]
mount: mounting /dev/mtdblock/3 on /htdocs/web/js/localization failed: Invalid argument
[/etc/init0.d/S40event.sh]: start ...
device eth0 entered promiscuous mode
br0: port 1(eth0) entering forwarding state
SERVD: event [SEALPAC.LOAD/default]
SEAMA: '/dev/mtdblock/3' is not a seama file !
[/etc/init0.d/S40gpioevent.sh]: start ...
Unable to open socket file : /var/gpio_ctrl
SERVD: event [WANPORT.LINKDOWN] not found!
SERVD: start service [PHYINF.ETH-1]
SERVD: start service [PHYINF.ETH-2]
SERVD: start service [PHYINF.ETH-3]
SERVD: start service [PHYINF.ETH-4]
[/etc/init0.d/S40ttyevent.sh]: start ...
[/etc/init0.d/S41autowan.sh]: start ...
[/etc/init0.d/S41autowanv6.sh]: start ...
[/etc/init0.d/S41event.sh]: start ...
[/etc/init0.d/S41factorydefault.sh]: start ...
[: missing ]
[/etc/init0.d/S41inf.sh]: start ...
SERVD: start service [BRIDGE]
[/etc/init0.d/S41isplst.sh]: start ...
BRIDGE: The device is not in the bridge mode.
SERVD: start service [LAN]
[/etc/init0.d/S42pthrough.sh]: start ...
[/etc/init0.d/S43checkfw.sh]: start ...
[/etc/init0.d/S51wlan.sh]: start ...
[/etc/init0.d/S65ddnsd.sh]: start ...
SERVD: start service [WAN]
[/etc/init0.d/S65logd.sh]: start ...
[/etc/init0.d/S65user.sh]: start ...
[/etc/init0.d/S80telnetd.sh]: start ...
killall: telnetd: no process killed
[/etc/init0.d/S80vlan.sh]: start ...
[/etc/init0.d/S91proclink.sh]: start ...
Create /var/proc/alpha symbolic link...
[/etc/init0.d/S93cpuload.sh]: start ...
[/etc/init0.d/rcS] done!

Please press Enter to activate this console. SERVD: start service [HW_NAT]
SERVD: start service [IPTABLES]
CONNTRACK_MAX=8192
CONNTRACK_MIN=4096
SERVD: start service [IP6TABLES]
SERVD: start service [IPTABLES]
SERVD: service [IPTABLES] is already started.
SERVD: start service [IP6TABLES]
SERVD: service [IP6TABLES] is already started.
SERVD: start service [INET.LAN-1]
[/var/servd/INET.LAN-1_start.sh]: starting LAN-1...
SERVD: event [LAN-1.UP/default]
/var/run/phpsh-1442.sh: line 6: can't create /proc/nf_accelerate_to_local: nonexistent directory
[/var/servd/INET.LAN-1_start.sh]: starting LAN-1 done !!!
SERVD: start service [INET.LAN-2]
[/var/servd/INET.LAN-2_start.sh]: starting LAN-2...
SERVD: event [LAN-2.UP/default]
[/var/servd/INET.LAN-2_start.sh]: starting LAN-2 done !!!
SERVD: start service [DEVICE.PASSTHROUGH]
device eth1 entered promiscuous mode
pppoe pass through (br0<->eth1)
SERVD: start service [INET.LAN-4]
#!/bin/sh
# No inet profile!!
exit 9

SERVD: start service [INET.LAN-5]
#!/bin/sh
# No inet profile!!
exit 9

SERVD: start service [INET.LAN-6]
ifsetup: (LAN-6) not active.
SERVD: service [INET.LAN-6] return error 8.
SERVD: start service [IPTMACCTRL]
SERVD: start service [IPTURLCTRL]
SERVD: start service [ACCESSCTRL]
SERVD: start service [IPTPORTT]
SERVD: start service [PHYINF.WIFI]
SERVD: start service [IP6T.LAN-1]
SERVD: start service [IP6T.LAN-2]
SERVD: start service [IP6T.LAN-3]
SERVD: start service [IP6T.LAN-4]
SERVD: start service [IP6T.LAN-5]
SERVD: start service [IP6T.LAN-6]
SERVD: stop service [LOGD]
SERVD: start service [LOGD]
SERVD: start service [DEVICE.ACCOUNT]
Password for 'Admin' has been updated
SERVD: start service [IPTABLES]
SERVD: service [IPTABLES] is already started.
SERVD: start service [IP6TABLES]
SERVD: service [IP6TABLES] is already started.
SERVD: start service [INET.WAN-1]
ifsetup: (WAN-1) not active.
SERVD: service [INET.WAN-1] return error 8.
SERVD: start service [INET.WAN-2]
ifsetup: (WAN-2) not active.
SERVD: service [INET.WAN-2] return error 8.
SERVD: start service [INET.WAN-3]
[/var/servd/INET.WAN-3_start.sh]: starting WAN-3...
WAN-3 a is link local interface.
SERVD: event [WAN-3.UP/default]
[/var/servd/INET.WAN-3_start.sh]: starting WAN-3 done !!!
SERVD: start service [INET.WAN-4]
ifsetup: (WAN-4) not active.
SERVD: service [INET.WAN-4] return error 8.
SERVD: start service [INET.WAN-5]
ifsetup: (WAN-5) not active.
SERVD: service [INET.WAN-5] return error 8.
SERVD: start service [DEVICE.VLAN]
br0: port 1(eth0) entering disabled state
br0: port 1(eth0) entering forwarding state
SERVD: start service [INET.WAN-6]
ifsetup: (WAN-6) no phyinf.
SERVD: service [INET.WAN-6] return error 9.
SERVD: start service [IPTMASQ]
SERVD: start service [IPTVSVR]
SERVD: start service [IPTPFWD]
SERVD: start service [IPTPORTT]
SERVD: service [IPTPORTT] is already started.
SERVD: start service [IPTDMZ]
SERVD: start service [IPT.WAN-1]
SERVD: start service [IP6T.WAN-1]
SERVD: start service [IPT.WAN-2]
SERVD: start service [IP6T.WAN-2]
SERVD: start service [IPT.WAN-3]
SERVD: start service [IP6T.WAN-3]
SERVD: start service [IPT.WAN-4]
SERVD: start service [IP6T.WAN-4]
SERVD: start service [IPT.WAN-5]
SERVD: service [IPT.WAN-5] return error 108.
SERVD: start service [IP6T.WAN-5]
SERVD: service [IP6T.WAN-5] return error 108.
SERVD: start service [IPT.WAN-6]
SERVD: start service [IP6T.WAN-6]
SERVD: stop service [INFSVCS.LAN-1]
SERVD: service [INFSVCS.LAN-1] is already stopped.
SERVD: start service [INFSVCS.LAN-1]
SERVD: event [LAN-1.CONNECTED] not found!
SERVD: event [INFSVCS.LAN-1.UP/default]
SERVD: event [STATUS.READY/default]
SERVD: stop service [INFSVCS.LAN-2]
SERVD: service [INFSVCS.LAN-2] is already stopped.
SERVD: start service [INFSVCS.LAN-2]
SERVD: event [LAN-2.CONNECTED] not found!
SERVD: event [INFSVCS.LAN-2.UP] not found!
SERVD: stop service [IPT.LAN-1]
SERVD: service [IPT.LAN-1] is already stopped.
SERVD: start service [IPT.LAN-1]
/var/servd/IPT.LAN-1_start.sh: line 4: can't create /proc/fastnat/forskipsupport: nonexistent directory
SERVD: stop service [IPT.LAN-2]
SERVD: service [IPT.LAN-2] is already stopped.
SERVD: start service [IPT.LAN-2]
/var/servd/IPT.LAN-2_start.sh: line 4: can't create /proc/fastnat/forskipsupport: nonexistent directory
SERVD: stop service [IPT.LAN-3]
SERVD: service [IPT.LAN-3] is already stopped.
SERVD: start service [IPT.LAN-3]
SERVD: service [IPT.LAN-3] return error 108.
SERVD: stop service [IPT.LAN-4]
SERVD: service [IPT.LAN-4] is already stopped.
SERVD: start service [IPT.LAN-4]
SERVD: service [IPT.LAN-4] return error 108.
SERVD: stop service [IPT.LAN-5]
SERVD: service [IPT.LAN-5] is already stopped.
SERVD: start service [IPT.LAN-5]
SERVD: service [IPT.LAN-5] return error 108.
SERVD: stop service [IPT.LAN-6]
SERVD: service [IPT.LAN-6] is already stopped.
SERVD: start service [IPT.LAN-6]
SERVD: service [IPT.LAN-6] return error 108.
SERVD: start service [PHYINF.BAND24G-1.1]
/bin/wlanapp.sh: line 3: sysconf: not found
device wlan1 is not a slave of br0
device wlan1 entered promiscuous mode
[ephp.c read_cond_list 1197] PHP operator precedence issue at: /etc/scripts/wifirnodes.php, cond_qty: 3, and_qty: 1, or_qty: 1
SERVD: event [WLAN.CONNECTED/default]
SERVD: start service [PHYINF.BAND24G-1.2]
SERVD: service [PHYINF.BAND24G-1.2] return error 8.
SERVD: start service [PHYINF.BAND5G-1.1]
/bin/wlanapp.sh: line 3: sysconf: not found
!!! adjust 5G 2ndoffset for 8812 !!!
device wlan0 is not a slave of br0
device wlan0 entered promiscuous mode
[ephp.c read_cond_list 1197] PHP operator precedence issue at: /etc/scripts/wifirnodes.php, cond_qty: 3, and_qty: 1, or_qty: 1
SERVD: event [WLAN.CONNECTED/default]
SERVD: start service [PHYINF.BAND5G-1.2]
SERVD: service [PHYINF.BAND5G-1.2] return error 8.
SERVD: stop service [WEBACCESS]
SERVD: service [WEBACCESS] is already stopped.
SERVD: start service [WEBACCESS]
webaccesssetup: (WAN-1) not ipv4.
killall: fileaccessd: no process killed
/var/servd/WEBACCESS_start.sh: line 4: fileaccessd: not found
SERVD: stop service [SAMBA]
SERVD: service [SAMBA] is already stopped.
SERVD: start service [SAMBA]
SAMBA server is disabled !
SERVD: stop service [INFSVCS.WAN-3]
SERVD: service [INFSVCS.WAN-3] is already stopped.
SERVD: start service [INFSVCS.WAN-3]
SERVD: event [WAN-3.CONNECTED] not found!
SERVD: event [UPDATERESOLV/default]
SERVD: event [INFSVCS.WAN-3.UP] not found!
SERVD: event [UPNP.IGD.NOTIFY.WANIPCONN1] not found!
SERVD: start service [ENLAN]
SERVD: event [IPV6ENABLE/default]
SERVD: event [IPV6ENABLE/default]
SERVD: event [IPV6ENABLE/default]
sh: can't create /proc/sys/net/ipv6/conf//disable_ipv6: nonexistent directory
SERVD: event [IPV6ENABLE/default]
sh: can't create /proc/sys/net/ipv6/conf//disable_ipv6: nonexistent directory
SERVD: start service [HTTP.LAN-1]
SERVD: start service [UPNP.LAN-1]
SERVD: event [UPNP.ALIVE.LAN-1/default]
SERVD: start service [NEAP.LAN-1]
SERVD: service [NEAP.LAN-1] return error 108.
SERVD: start service [NAMERESOLV.LAN-1]
SERVD: start service [DHCPS4.LAN-1]
SERVD: start service [DNS4.LAN-1]
SERVD: stop service [BWC.LAN-1]
SERVD: service [BWC.LAN-1] is already stopped.
SERVD: start service [BWC.LAN-1]
bwc_setup: (LAN-1) bwc node/profile not exist, service stop.
SERVD: service [BWC.LAN-1] return error 8.
SERVD: start service [INET.LAN-3]
Excuting hostapd
[/var/sbr0: port 1(eth0) entering disabled state
ervd/INET.LAN-3_start.sh]: starting LAN-3...
br0: port 1(eth0) entering forwarding state
[/var/servd/INET.LAN-3_start.sh]: starting LAN-3 done !!!
SERVD: start service [ENLAN]
SERVD: service [ENLAN] is already started.
SERVD: start service [HTTP.LAN-2]
httpsetup: (LAN-2) not active.
SERVD: service [HTTP.LAN-2] return error 8.
SERVD: start service [DHCPS4.LAN-2]
SERVD: start service [DNS4.LAN-2]
SERVD: stop service [ROUTE.STATIC]
SERVD: service [ROUTE.STATIC] is already stopped.
SERVD: start service [ROUTE.STATIC]
SERVD: stop service [ROUTE.IPUNNUMBERED]
SERVD: service [ROUTE.IPUNNUMBERED] is already stopped.
SERVD: start service [ROUTE.IPUNNUMBERED]
SERVD: stop service [IPTOBF]
SERVD: service [IPTOBF] is already stopped.
SERVD: start service [IPTOBF]
SERVD: stop service [IPTDEFCHAIN]
SERVD: service [IPTDEFCHAIN] is already stopped.
SERVD: start service [IPTDEFCHAIN]
nf_conntrack_rtsp v0.6.21 loading
nf_nat_rtsp v0.6.21 loading


************* Initialize MAC/PHY parameter *************
[MAC_REG_8192Emp]
[PHY_REG_8192Emp]
[PHY_REG_PG_8192E_new]
[AGC_TAB_8192Emp]
RadioA_8192Emp
[RadioB_8192Emp]
[TXPWR_LMT_92EE_new]
insmod: can't insert '/lib/modules/nf_nat_proto_gre.ko': unknown symbol in module, or unknown parameter
insmod: can't insert '/lib/modules/nf_conntrack_proto_gre.ko': unknown symbol in module, or unknown parameter
SERVD: stop service [LLD2]
SERVD: service [LLD2] is already stopped.
SERVD: start service [LLD2]
br0: port 2(wlan1) entering forwarding state
SERVD: stop service [STUNNEL]
SERVD: service [STUNNEL] is already stopped.
SERVD: start service [STUNNEL]
Start Stunnel service ..
SERVD: stop service [IPT.WAN-1]
SERVD: start service [IPT.WAN-1]


************* Initialize MAC/PHY parameter *************
[MAC_REG_8881Am]
[PHY_REG_8881Am]
[PHY_REG_PG_8881AMP_intpa]
[AGC_TAB_8881AMP_intpa]
[RadioA_8881AMP_intpa]
[TXPWR_LMT_8881AMP_intpa]
[TxPowerTrack_AP_8881AMP_intpa]
8881A external PA PIN control :87503 or RTC 5634
SERVD: start service [HTTP.WAN-3]
httpsetup: (WAN-3) not active.
SERVD: service [HTTP.WAN-3] return error 8.
SERVD: stop service [IP6TDEFCHAIN]
SERVD: service [IP6TDEFCHAIN] is already stopped.
SERVD: start service [IP6TDEFCHAIN]
br0: port 3(wlan0) entering forwarding state
SERVD: stop service [FIREWALL6]
SERVD: service [FIREWALL6] is already stopped.
SERVD: start service [FIREWALL6]
SERVD: stop service [IP6TSMPSECURITY]
SERVD: service [IP6TSMPSECURITY] is already stopped.
SERVD: start service [IP6TSMPSECURITY]
SERVD: stop service [ROUTE6.DYNAMIC]
SERVD: service [ROUTE6.DYNAMIC] is already stopped.
SERVD: start service [ROUTE6.DYNAMIC]
SERVD: stop service [ROUTE6.STATIC]
SERVD: service [ROUTE6.STATIC] is already stopped.
SERVD: start service [ROUTE6.STATIC]
SERVD: stop service [MULTICAST]
SERVD: service [MULTICAST] is already stopped.
SERVD: start service [MULTICAST]
SERVD: stop service [DEVICE.TIME]
SERVD: service [DEVICE.TIME] is already stopped.
SERVD: start service [DEVICE.TIME]
Run NTP client ...
[V4] []
SERVD: stop service [ROUTE.DYNAMIC]
SERVD: service [ROUTE.DYNAMIC] is already stopped.
SERVD: start service [ROUTE.DYNAMIC]
SERVD: service [ROUTE.DYNAMIC] return error 108.
SERVD: stop service [EMAIL]
SERVD: service [EMAIL] is already stopped.
SERVD: start service [EMAIL]
SERVD: stop service [UPNPC]
SERVD: service [UPNPC] is already stopped.
SERVD: start service [UPNPC]
SERVD: service [UPNPC] return error 108.
SERVD: stop service [MDNSRESPONDER]
SERVD: service [MDNSRESPONDER] is already stopped.
SERVD: start service [MDNSRESPONDER]
ntpclient -h time.nist.gov -i 5 -s -4
time.nist.gov: Unknown host
mdnsresponder server start !
NTP4 will run in 10 seconds!
SERVD: stop service [NAMERESOLV]
SERVD: service [NAMERESOLV] is already stopped.
SERVD: start service [NAMERESOLV]
SERVD: stop service [DNS]
SERVD: service [DNS] is already stopped.
SERVD: start service [DNS]
killall: dnsmasq: no process killed
SERVD: stop service [INET.LAN-3]
[/var/servd/INET.LAN-3_stop.sh]: stopping LAN-3...
[/var/servd/INET.LAN-3_stop.sh]: stopping LAN-3 done !!!
SERVD: start service [INET.LAN-3]
[/var/servd/INET.LAN-3_start.sh]: starting LAN-3...
LAN-3 a is link local interface.
SERVD: event [LAN-3.UP/default]
[/var/servd/INET.LAN-3_start.sh]: starting LAN-3 done !!!
SERVD: stop service [HTTP]
SERVD: service [HTTP] is already stopped.
SERVD: start service [HTTP]
SERVD: event [HTTP.UP] not found!
SERVD: stop service [IPT.WAN-3]
SERVD: start service [IPT.WAN-3]
SERVD: stop service [IP6TFIREWALL]
SERVD: service [IP6TFIREWALL] is already stopped.
SERVD: start service [IP6TFIREWALL]
SERVD: stop service [IP6T.WAN-1]
SERVD: start service [IP6T.WAN-1]
SERVD: stop service [IP6T.WAN-2]
SERVD: start service [IP6T.WAN-2]
SERVD: stop service [IP6T.WAN-3]
SERVD: start service [IP6T.WAN-3]
SERVD: stop service [IP6T.WAN-4]
SERVD: start service [IP6T.WAN-4]
SERVD: stop service [IP6T.WAN-5]
SERVD: service [IP6T.WAN-5] is already stopped.
SERVD: start service [IP6T.WAN-5]
SERVD: service [IP6T.WAN-5] return error 108.
SERVD: stop service [IP6T.WAN-6]
SERVD: start service [IP6T.WAN-6]
SERVD: stop service [IP6T.LAN-1]
SERVD: start service [IP6T.LAN-1]
SERVD: stop service [IP6T.LAN-2]
SERVD: start service [IP6T.LAN-2]
SERVD: stop service [IP6T.LAN-3]
SERVD: start service [IP6T.LAN-3]
SERVD: stop service [IP6T.LAN-4]
SERVD: start service [IP6T.LAN-4]
SERVD: stop service [IP6T.LAN-5]
SERVD: start service [IP6T.LAN-5]
SERVD: stop service [IP6T.LAN-6]
SERVD: start service [IP6T.LAN-6]
SERVD: start service [LOG.EMAIL]
SERVD: stop service [INFSVCS.LAN-3]
SERVD: service [INFSVCS.LAN-3] is already stopped.
SERVD: start service [INFSVCS.LAN-3]
SERVD: event [LAN-3.CONNECTED] not found!
SERVD: event [INFSVCS.LAN-3.UP] not found!
SERVD: start service [ENLAN]
SERVD: service [ENLAN] is already started.
SERVD: start service [HTTP.LAN-3]
SERVD: start service [UPNP.LAN-3]
SERVD: event [UPNP.ALIVE.LAN-3/default]
SERVD: start service [NAMERESOLV.LAN-3]
SERVD: stop service [ROUTE6.STATIC]
SERVD: start service [ROUTE6.STATIC]
SERVD: stop service [ROUTE6.DYNAMIC]
SERVD: start service [ROUTE6.DYNAMIC]
SERVD: stop service [IP6TSMPSECURITY]
SERVD: start service [IP6TSMPSECURITY]
SERVD: stop service [IP6TOBF]
SERVD: service [IP6TOBF] is already stopped.
SERVD: start service [IP6TOBF]
SERVD: stop service [IP6TDEFCHAIN]
SERVD: start service [IP6TDEFCHAIN]
SERVD: stop service [ROUTE.DYNAMIC]
SERVD: service [ROUTE.DYNAMIC] is already stopped.
SERVD: start service [ROUTE.DYNAMIC]
SERVD: service [ROUTE.DYNAMIC] return error 108.
SERVD: stop service [LLD2]
SERVD: start service [LLD2]
SERVD: stop service [HTTP]
killall: httpd: no process killed
SERVD: event [HTTP.DOWN] not found!
SERVD: start service [HTTP]
startup_server:IPV6, is multicast
SERVD: event [HTTP.UP] not found!
SERVD: stop service [NAMERESOLV]
SERVD: start service [NAMERESOLV]
Run NTP client ...
[V6] []

/proc/mtd

 • /proc/mtd • >>
dev:    size   erasesize  name
mtd0: 00010000 00001000 "u-boot"
mtd1: 00010000 00001000 "mfcdata"
mtd2: 00010000 00001000 "devconf"
mtd3: 00020000 00001000 "langpack"
mtd4: 00010000 00001000 "caldata"
mtd5: 007a0000 00001000 "upgrade"
mtd6: 005cb000 00001000 "rootfs"
mtd7: 00800000 00001000 "flash"

mount

 • mount • >>
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro,relatime)
none on /proc type proc (rw,relatime)
usbfs on /proc/bus/usb type usbfs (rw,relatime)
ramfs on /var type ramfs (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
tmpfs on /dev type tmpfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600)

ps

 • ps • >>
  PID USER       VSZ STAT COMMAND
    1 root       748 S    init
    2 root         0 SW<  [kthreadd]
    3 root         0 SW<  [ksoftirqd/0]
    4 root         0 SW<  [events/0]
    5 root         0 SW<  [khelper]
    8 root         0 SW<  [async/mgr]
   83 root         0 SW<  [kblockd/0]
   93 root         0 SW<  [khubd]
  111 root         0 SW   [pdflush]
  112 root         0 SW<  [kswapd0]
  113 root         0 SW<  [nfsiod]
  220 root         0 SW<  [mtdblockd]
  265 root         0 SW<  [rpciod/0]
  287 root       808 S <  udevd --daemon
  312 root      1644 S    xmldb -d -n wrgac52_dlink.2013gui_dwr118 -t
  313 root      1000 S    servd -d schedule_off
  480 root       764 S    gpiod -w 4
  875 root       792 S    ddnsd
  997 root       752 S    /bin/sh /etc/scripts/cpuload.sh
 1020 root       760 R    -/bin/sh
 1059 root       752 S    portt -c DNAT.PORTT
 1694 root       768 S    logd -p notice
 1695 root       744 S    klogd -p notice -e br0 LAN-1 -e br1 LAN-2
 2460 root      1020 S    updatewifistats -s /etc/scripts/upwifistatshlper_G_ba
 2473 root      1020 S    updatewifistats -s /etc/scripts/upwifistatshlper_A_ba
 2591 root       980 S    udhcpd /var/servd/LAN-1-udhcpd.conf
 2736 root       980 S    udhcpd /var/servd/LAN-2-udhcpd.conf
 2828 root      1384 S    hostapd /var/topology.conf
 2944 root      2620 S    stunnel /var/stunnel.conf
 3133 root      1124 S    mDNSResponderPosix -b -i br0 -f /var/rendezvous.conf
 3163 root       892 S    dnsmasq -C /var/servd/DNS.conf
 3592 root       744 S    sleep 1
 3593 root       752 R    ps
 3800 root       872 S    lld2d -c /var/lld2d.conf br0 wlan1 wlan0
 3838 root      4836 S    httpd -f /var/run/httpd.conf
 3862 root       780 S    nameresolv -n -l -i br0 -r dlinkrouter -r shareport.l

See also

WLAN: MediaTek MT7610EN, LAN: 2x IC+ IP1001
FCC ID: KA2WR118A1 (03/23/2016), 12V/1.5A
WLAN: MediaTek MT7612EN, LAN: 1x Marvell 88E1510
WLAN: Realtek RTL8192ER, LAN: 1x RTL8211E

Images

Królik's unit