Dynex DX-EBNBC
Jump to navigation
Jump to search
Dynex DX-EBNBC
Manuf (OEM/ODM): SerComm
Interface: PCMCIA (32-bit)
ID: 14e4:4318 (21 addl. devices) SS: 1799:7d1a
Windows: PCI\VEN_14E4&DEV_4318&SUBSYS_7D1A1799
FCC ID: K7SF5D7011B
IC ID: 3623A-F5D7011B
WI1 chip1: Broadcom BCM4318E
Probable Linux driver
b43 (in backports)
PCI ID first seen in kernel v2.6.17 (2006-06-18)
(see also passys)
Antenna connector: none
bg
FCC ID | |
---|---|
Belkin F5D7011B | K7SF5D7011B |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Enhanced Wireless G Notebook Card
Per the below info, this device is assumed to be using BCM4318E..
Wi-Fi Certified : WFA5679 (as of 10/04/2007)
lspci -nnv dump
06:00.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02) Subsystem: Belkin Device [1799:7d1a] Flags: bus master, fast devsel, latency 64, IRQ 19 Memory at f1d00000 (32-bit, non-prefetchable) [size=8K] Kernel driver in use: b43-pci-bridge
ssb + b43 info dump
[16075.192908] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02 [16075.192932] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243) [16075.192948] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243) [16075.192972] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243) [16075.192980] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243) [16075.233003] b43-phy3: Broadcom 4318 WLAN found (core revision 9) [16075.276824] b43-phy3: Found PHY: Analog 3, Type 2 (G), Revision 7 [16075.300976] ssb: Sonics Silicon Backplane found on PCI device 0000:06:00.0 [16075.304628] ieee80211 phy3: Selected rate control algorithm 'minstrel_ht' [16075.496892] b43-phy3: Loading firmware version 666.2 (2011-02-23 01:15:07) [16075.561567] IPv6: ADDRCONF(NETDEV_UP): wlan173: link is not ready