Edimax EW-7478AC
Edimax EW-7478AC
FCC approval date: 07 July 2016
Country of manuf.: China
Series: AC1200
Type: range extender
FCC ID: NDD9574781603
Power: 100-240 VAC ~ 50/60 Hz, 1.5 A
Connector type: AC (direct)
CPU1: MediaTek MT7620A (580 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX25L6433F)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6KB-25)
Expansion IFs: none specified
Serial: yes, 4-pin header, unpopulated, 3.3V TTL, (57600,8,N,1)
WI1 chip1: MediaTek MT7620A
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
WI2 chip1: MediaTek MT7612E
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 2x2:2
WI2 antenna connector: RP-SMA
ETH chip1: MediaTek MT7620A
ETH chip2: Realtek RTL8211E
LAN speed: 1G
LAN ports: 1
abgn+ac
Default IP address: 192.168.9.2
the IP 192.168.9.2 is used by 4 additional devices
of which 4 are Edimax devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 73 are Edimax devices
802dot11 OUI: none specified
For a list of all currently documented MediaTek chipsets with specifications, see MediaTek.
Smart AC1200 Dual-Band Wi-Fi Extender/Access Point/Wi-Fi Bridge
Certificate of Compliance at the FCC covers the following devices:
- EW-7478AC
- EW-7478WAP
- RE11S
- RG21
- RE11
- RE10
Web GUI: http://edimaxext.setup