Eumitcom WL11000P
Eumitcom WL11000 P
FCC approval date: 19 May 2000
Country of manuf.: Taiwan
Amazon image
ASIN
B00BKEQ79S (
, On Amazon, On CCC, multiple uses)
multiple revisions of this device, use caution
Interface: PCI
ID: 1638:1100
Windows: PCI\VEN_1638&DEV_1100
FCC ID: LLM002WL11000-1, LLM007WL11000-2
IC ID: 37321032225A317
Chipset: Intersil PRISM 2
WI1 chip1: Harris HFA3841
WI1 chip2: Intersil HFA3861
WI1 chip3: Intersil HFA3683A
Probable Linux driver
hostap or orinoco (in backports)
PCI ID first seen in kernel v2.6.12 (2005-06-17)
(see also passys)
Antenna connector: none
b
| FCC ID | |
|---|---|
| 3Com AirConnect 3CRWE777A (module) | LLM002WL11000-1 |
| Addtron AWA-100 | LLM002WL11000-1 |
| Addtron AWP-100 | LLM002WL11000-1 |
| Belkin F5D6020 v1 | K7SF5D6020 LLM002WL11000-1 |
| CNet CNWLC-811-3V | LLM002WL11000-1 |
| Eumitcom WL11000 | LLM002WL11000-1 |
| Intermec MobileLAN card 11 | LLM002WL11000-1 |
| Panasonic ET-CDWL1 (N5HBD0000002) | LLM002WL11000-1 |
| SMC SMC2632W v1 | LLM002WL11000-1 |
| Siemens SS1021 v1 | LLM002WL11000-1 |
| USRobotics USR2410 | LLM002WL11000-1 |
| FCC ID | |
|---|---|
| Addtron AWS-100 | LLM007WL11000-2 |
| Eumitcom WL11000-2 | LLM007WL11000-2 |
| Eumitcom WL11000SA-N | LLM007WL11000-2 |
| SMC SMC2652W | LLM007WL11000-2 |
| USRobotics USR2450 | LLM007WL11000-2 |
| Chip1 brand | Chip2 brand | |
|---|---|---|
| Eumitcom WL11000 | Harris | Intersil |
| Eumitcom WL11000-2 | Harris | Intersil |
| Eumitcom WL11000P | Harris | Intersil |
For a list of all currently documented Harris chipsets with specifications, see Harris.
For a list of all currently documented Intersil chipsets with specifications, see Intersil.
Eumitcom WL11000P, Eumitcom WL11000 on a PLX PCMCIA->PCI converter
- Eumitcom WL11000 - PCMCIA Card (PRISM 2/2.5/3)
- Eumitcom WL11000P - PCI Slot Adapter (PLX9052)
- PCI ID: 0x1638:0x1100 (PCI ID)
This card provides the following output via hostap_diag... (more)
NICID: id=0x8002 v1.0.0 (HWB3163-01,02,03,04 Rev A) PRIID: id=0x0015 v0.3.0 STAID: id=0x001f v1.7.1 (station firmware)
.. however, I did upgrade the STA firmware.
The PCMCIA module used with the adapter is 3.3V keyed.
See also
Wireless Adapter Chipsets Table
- 3Com 3CRWE777 (PRISM 2.5 + PLX9052)
- PCI ID: 10b7:7770 (3Com), SS ID: 0101:0777
- PCI\VEN_10B7&DEV_7770, PCI\VEN_10B7&DEV_1F1F
- Addtron AWA-100 - 0x1638:0x1100 (PCI ID)
- Ericsson C11 - WLAN Card - 0x016b:0x0001 (PRISM 2.5/Orinoco)
- Ericsson DSSS Wireless LAN PCI Card - PCI\VEN_5401&DEV_0101
- Eumitcom WL11000 - PCMCIA Card (PRISM 2/2.5/3)
- Eumitcom WL11000P - PCI Slot Adapter (PLX9052)
- PCI ID: 0x1638:0x1100 (PCI ID)
- Belkin WL11000P - 0x1638:0x1100 (PLX9052)
- Belkin F5D6020 v1 - 0x01bf:0x2328 (PRISM 2)
- SMC SMC2602W v1 - 0x1638:0x1100 (PRISM 2) (PCI ID)
- SMC SMC2632W v1 - Wireless PC Card 0x0156:0x0002 (PRISM 2)
- SMC SMC2652W AP - Eumitcom WL11000SA-N/Addtron AWS-100
- Eumitcom WL11000-2 PCMCIA Card (PRISM 2/2.5/3)
- Symbol LA-41x3 - Spectrum24 Wireless LAN PCI Card - 0x1562:0x0001
- PCI\VEN_1562&DEV_0001&SUBSYS_00010001
Images
Wireless module
top
bottom
