Linksys E1000 v2.0

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Linksys E1000 v2.0

Manuf (OEM/ODM): CyberTAN

FCC approval date: 18 May 2010
Country of manuf.: China

Type: wireless router

FCC ID: Q87-E1000V2
IC ID: 3839A-E1000V2

Power: 12 VDC, 0.5 A
Connector type: barrel

CPU1: Broadcom BCM5357B0 (300 MHz)
FLA1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX25L3206E)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond W9425G6JH-5)

Expansion IFs: none specified

WI1 chip1: Broadcom BCM5357B0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none

ETH chip1: Broadcom BCM5357B0
Switch: Broadcom BCM5357B0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bgn

TPFirmware supported: DD-WRT • (List), Tomato (Shibby) • (DLs) • (List)

Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1221 additional devices
of which 149 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 285 additional devices
of which 142 are Linksys devices

802dot11 OUI: 98:FC:11 (8 E, 9 W)
Ethernet OUI: 98:FC:11 (8 E, 9 W)

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


Wireless-N Router
 • Support page  • (Template link outdated)

E1000 v2 serial numbers appear to start with CVN1.

"3763-11200502R" is silkscreened on the board in the FCC photos. The hardware appears to be the same as the Cisco Valet M10 v2.

Linksys E1000 2.0 on TechInfoDepot

Listed on the 'Linksys routers' page on Wikipedia

The default SSID is probably CiscoXXXXX where XXXXX is the last 5 digits of the serial number. If the device has been configured with Cisco Connect the device will probably have a randomly generated SSID.

Supported by K26RT-N builds of Tomato by Shibby.