Linksys E1200 v2
Linksys E1200 v2
Availability: common
Manuf (OEM/ODM): CyberTAN
FCC approval date: 20 October 2011
Country of manuf.: China
Amazon image
ASIN
B004T9RR6I (, On Amazon, On CCC, multiple uses)
multiple revisions of this device, use caution
Type: wireless router
FCC ID: Q87-E1200V2
IC ID: 3839A-E1200V2
Power: 12 VDC, 0.5 A
Connector type: barrel
CPU1: Broadcom BCM5357C0
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond 25Q64BVSIG)
RAM1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Winbond W9425G6JH-5)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM5357C0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Broadcom BCM5357C0
Switch: Broadcom BCM5357C0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
TPFirmware supported: DD-WRT • (List), Tomato (Shibby) • (List | DLs), TomatoUSB RAF (Victek) • (List | DLs), Tomato (Hyzoom) • (Tomato (Shibby) mod)
Default SSID: CiscoXXXXX (6 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 154 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 295 additional devices
of which 143 are Linksys devices
802dot11 OUI: 20:AA:4B (8 E, 8 W), 58:6D:8F (8 E, 8 W)
Ethernet OUI: 20:AA:4B (8 E, 8 W), 58:6D:8F (8 E, 8 W)
CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
---|---|---|---|
Linksys E1200 v1 | Broadcom | Broadcom | |
Linksys E1200 v2 | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Wireless-N300 Router
• Support page • (Template link outdated)
E1200 v2 serial numbers may start with 1082.
This is the same CyberTAN board P/N as the Linksys E800 and the Linksys E900.
- "3763-11900102R" is silkscreened on the board.
The default SSID is CiscoXXXXX where XXXXX is the last 5 digits of the serial number.
- If the device has been configured with Cisco Connect the device will have
- a randomly generated SSID. A sample serial number is 10820C61254538.
The power adapter included with the device is a HON-KWANG HK-Q106-A12 (12V, 0.5A).
Third party firmware support
This device is supported by..
- RAF builds of Tomato by Victek.
- K26RT-N builds of Tomato by Shibby.
- Tomato Hyzoom
- most recent DD-WRT builds