Linksys E2500 v2
Linksys E2500 v2
Manuf (OEM/ODM): CyberTAN
FCC approval date: 16 November 2012
Country of manuf.: China
Type: wireless router
FCC ID: Q87-E2500V2
IC ID: 3839A-E2500V2
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Broadcom BCM5358UB0 (300 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Winbond Model?)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Samsung Model?)
Expansion IFs: none specified
WI1 chip1: Broadcom BCM5358UB0
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Broadcom BCM43236
WI2 802dot11 protocols: an
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM5358UB0
Switch: Broadcom BCM5358UB0
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
abgn
TPFirmware supported: FreshTomato • (List | DLs)
Default SSID: CiscoXXXXX (6 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 154 are Linksys devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1327 additional devices
of which 58 are Linksys devices
| CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
|---|---|---|---|
| Linksys E2500 v1 | Broadcom | Broadcom | Broadcom |
| Linksys E2500 v2 | Broadcom | Broadcom | Broadcom |
| Linksys E2500 v3 | Broadcom | Broadcom | Broadcom |
| Linksys E2500 v4 | MediaTek | MediaTek | MediaTek |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
"3753-30000501R" and the Cisco logo is silkscreened on the board in the FCC photos.
This device seems to be another BCM5358UB0 (identifiable in FCC photos) + BCM43236x (not identifiable) device.
Flashed with third party firmware, dmesg reports:
- 8MB ST compatible serial flash
- CPU: BCM5357 rev 2 at 300 MHz
- Determined physical RAM memory: 65536k
- ethx: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138.9
This data was used to determine Flash and RAM size
The default SSID pattern is CiscoXXXXX, where XXXXX is the last 5 digits of the router's serial number.
