Linksys E4200 v1
Linksys E4200 v1
Availability: common
Manuf (OEM/ODM): CyberTAN
FCC approval date: 20 October 2010
(Est.) release date: 19 January 2011
UPC: 745883590438 (UPC DB, On eBay)
Country of manuf.: China
S/N prefix: 01C10C
Type: wireless router
FCC ID: Q87-E4200
IC ID: 3839A-E4200
Power: 12 VDC, 2 A
Connector type: barrel
CPU1: Broadcom BCM4718A1 (480 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond W25Q128BVFG)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6JB-3)
Expansion IFs: USB 2.0
USB ports: 1
WI1 chip1: Broadcom BCM4718A1
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
WI2 chip1: Broadcom BCM4331
WI2 802dot11 protocols: an
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM4718A1
Switch: Broadcom BCM53115
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn
Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2528L;SiGe, 2528L, 108EC;2;
2.4/5GHz Front End Module;Skyworks;SE2594L;SiGe, SE2594L, 109HD;3;
Stock bootloader: CFE
Stock FW OS: Linux
TPFirmware supported: DD-WRT • (List), Tomato (Shibby) • (List | DLs), TomatoUSB RAF (Victek) • (List | DLs)
Default SSID: CiscoXXXXX (6 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 154 are Linksys devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 300 additional devices
of which 143 are Linksys devices
802dot11 OUI: 58:6D:8F (8 E, 8 W), C0:C1:C0 (12 E, 14 W)
Ethernet OUI: 58:6D:8F (8 E, 8 W), C0:C1:C0 (12 E, 14 W)
| CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
|---|---|---|---|
| Linksys E4200 v1 | Broadcom | Broadcom | Broadcom |
| Linksys E4200 v2 | Marvell | Marvell | Marvell |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
Maximum Performance Dual-Band N Router
"3763-40700105R" and the Cisco logo is silkscreened on the board.
- This router uses Galtronics antennas.
- Note: Three antennas are used by the 2.4 GHz radio, but it's still a 2T2R radio..
The default SSID pattern for this device is CiscoXXXXXX on both bands,
- where XXXXX is the last 5 characters of the serial number.
Wi-Fi Certified : WFA9933 (as of 10/18/2010)
Additional external links
Wikis
Reviews
Forum threads
- The v1 serial numbers appear to start with 01C10C..
Firmware projects
This device is supported by...
- Victek's Tomato RAF builds
- Shibby's Tomato builds (K26 and K26RT-N)
- Toastman's Tomato builds
Images
- from Cisco
angled unit
angled front
top
front
back
box
- internal
board top
board top, shields off
over the BCM4331
BCM4331 w/ top shield off
...and closer up
CyberTAN P/N, RAM, etc.
RAM
antenna and Flash
5GHz RF section
2.4GHz RF section
BCM53115 GbE Switch
L side, top view
R side, top view
L side, over top (angled)
L side, angled internal, over top (angled)
L side, front, over top (angled)
L side, antenna view
R side, angled back, over top (angled)
R side, angled front, over top (angled)
back side, angled top view
