Linksys EA6350 v2

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

Linksys EA6350 v2

Manuf (OEM/ODM): Arcadyan WG9116F AC22 1-88 V3

FCC approval date: 28 August 2015
Country of manuf.: China
S/N prefix: 14Y2

Amazon image

ASIN
B00JZWQW4C (Flag of the United States.svg, On Amazon, On CCCmultiple uses)
multiple revisions of this device, use caution

Type: wireless router

FCC ID: Q87-EA6350V2
IC ID: 3839A-EA6350V2
PCB ID: 141911620013J

Power: 12 VDC, 2 A
Connector type: barrel

CPU1: Broadcom BCM4708C0 (1.0 GHz, 2 cores)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Toshiba TC58BVG0S3HTA00)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (EtronTech EM6GC16EWXD-12H)

Expansion IFs: USB 3.0
USB ports: 1
JTAG: yes, 10-pin header, J5
Serial: yes, internal, 4-pin header, 3.3V TTL, J14

WI1 chip1: Broadcom BCM4352
WI1 802dot11 protocols: an+ac
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
WI2 chip1: Broadcom BCM43217
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL

ETH chip1: Broadcom BCM4708C0
Switch: Broadcom BCM4708C0
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1

abgn+ac

Additional chips
2.4GHz Power Amplifier Module;Skyworks;SE2623L;;2;
5GHz Power Amplifier Module;Skyworks;SKY85405;SKY85405, 441EJ, 1441 MY;2;

TPFirmware supported: FreshTomato • (List | DLs)

802dot11 OUI: 48:F8:B3 (3 E, 4 W)

 CPU1 brandWI1 chip1 brandWI2 chip1 brand
Linksys EA6350BroadcomBroadcomBroadcom
Linksys EA6350 v2BroadcomBroadcomBroadcom
Linksys EA6350 v3QualcommQualcommQualcomm
Linksys EA6350 v4MediaTekMediaTekMediaTek

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.


AC1200+ Dual-Band Smart Wi-Fi Wireless Router

Product page  • Support page

"P/N: 141911620013J REV:08", "RoHS", and the new Linksys logo

appears to be silkscreened on the board in the FCC photos.

Wi-Fi Certified : WFA62026 (as of 12/15/2015)

Serial

Serial Pinouts

The serial port named "J14 connector" is at the left of the processor’s heat diffuser.

The 3.3V pin is marked by a little white arrow in front of the most left pin.
Next is TX pin and next is RX pin and finally GND is the most right pin.
VCC  TX RX  GND
 o   o   o   o
 ^

Info dump

 • Info dump • >>
serial boot log
Digital core power voltage set to 0.9375V
Digital core power voltage set to 0.9375V
Digital core power voltage set to 0.9375V
Decompressing...done
Digital core power voltage set to 0.9375V

SHMOO VER 1.13

PKID07DC06011801080000000000001A103F01000000

S3004024B
00001BC0

RDLYW0 00000004
RDENW0 00000037
RDQSW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 01 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 02 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 03 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 04 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 05 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 06 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 07 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 08 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 09 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 10 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 11 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 12 --+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-
 13 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++--
 14 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 15 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--

PW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 01 -----------++++++++++++++++++++++++++X++++++++++++++++++++++++++
 02 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 03 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 04 -+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++
 05 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 06 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 07 -------++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 08 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 09 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 10 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 11 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 12 --+++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-
 13 --++-+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++-
 14 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 15 ++++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++

NW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 01 ----------+++++++++++++++++++++++++++X++++++++++++++++++++++++++
 02 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 03 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 04 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 05 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 06 --+++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 07 ------+++++++++++++++++++++++++++++X++++++++++++++++++++++++++++
 08 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 09 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 10 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 11 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 12 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++
 13 ----++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 14 -----+++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++
 15 ---++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++--

WRDQW0

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 ++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++----
 01 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 02 +++++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++++-
 03 +++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++--
 04 +++++++++++++++++++++++++++X+++++++++++++++++++++++++++---------
 05 +++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++--
 06 +++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------
 07 +++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++--
 08 +++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-----
 09 ++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++---
 10 +++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++--
 11 ++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++---
 12 +++++++++++++++++++++++++++++X+++++++++++++++++++++++++++++-----
 13 +++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------
 14 ++++++++++++++++++++++++++++++X++++++++++++++++++++++++++++++---
 15 +++++++++++++++++++++++++++++X++++++++++++++++++++++++++++------

WRDMW0 00000030
WRDMW0 00000029

ADDR

    0000000000111111111122222222223333333333444444444455555555556666
    0123456789012345678901234567890123456789012345678901234567890123
 00 +++++++++++++++++++++++++++S+++X++++++++++++++++++++++++++++++++

Decompressing...done
Found a Toshiba NAND flash:
Total size:  128MB
Block size:  128KB
Page Size:   2048B
OOB Size:    64B
Sector size: 512B
Spare size:  16B
ECC level:   8 (8-bit)
Device ID: 0x98 0xf1 0x80 0x15 0xf2 0x16
find_devinfo: devinfo block found at 0x00180000!

CFE version 6.37.14.62 (r437318) based on BBP 1.0.37 for BCM947XX (32bit,SP,)
Build Date: Wed Aug 26 16:33:24 CST 2015 (proc@ubuntu12d04LTS), 
 for the WG9116FAC22 1-88 V3 board
Copyright (C) 2000-2008 Broadcom Corporation.
Copyright (C) 2013-2014 Arcadyan Corporation.

WG9116FAC22_88 board, flashing LED...

Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
DDR Clock: 533 MHz
Info: DDR frequency set from clkfreq=800,*533*
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 6.37.14.62 (r437318)
CPU type 0x0: 800MHz
Tot mem: 131072 KBytes

CFE mem:    0x00F00000 - 0x01794734 (8996660)
Data:       0x00F5ACE0 - 0x00F5B2E4 (1540)
BSS:        0x00F5B2F0 - 0x00F92734 (226372)
Heap:       0x00F92734 - 0x01792734 (8388608)
Stack:      0x01792734 - 0x01794734 (8192)
Text:       0x00F00000 - 0x00F4E004 (319492)
Boot:       0x01795000 - 0x017D5000
Reloc:      I:00000000 - D:00000000

Boot version: v2.2.2

Device eth0:  hwaddr 48-F8-B3-ED-D0-61, ipaddr 10.0.3.1, mask 255.255.255.0
        gateway not set, nameserver not set
Loader:raw, invalid tftp target filename (:)!
Could not load :: Invalid parameter
Booting(1): boot -raw -z -addr=0x8000 -max=0xef8000 nflash0.os2:
Loader:raw Filesys:raw Dev:nflash0.os2 File: Options:(null)
Loading: ..... 4868160 bytes read
Entry at 0x00008000
Closing network.
Starting program at 0x00008000
console [ttyS0] enabled, bootconsole disabled
serial8250.0: ttyS1 at MMIO 0x18000400 (irq = 117) is a 16550
brd: module loaded
loop: module loaded
pflash: found no supported devices
bcmsflash: found no supported devices
The first offset=200000, 2nd offset=1f00000
Boot partition size = 524288(0x80000)
lookup_nflash_rootfs_offset: offset = 0x200000
nflash: squash filesystem with lzma found at block 29
lookup_nflash_rootfs_offset: offset = 0x1f00000
nflash: squash filesystem with lzma found at block 263
Creating 6 MTD partitions on "nflash":
0x000000000000-0x000000080000 : "boot"
0x000000080000-0x000000200000 : "nvram"
0x000000200000-0x000001f00000 : "linux"
0x0000003a0000-0x000001f00000 : "rootfs"
0x000001f00000-0x000003c00000 : "linux2"
0x0000020e6098-0x000003c00000 : "rootfs2"
PPP generic driver version 2.4.2
PPP MPPE Compression module registered
NET: Registered protocol family 24
PPTP driver version 0.8.5
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
CSLIP: code copyright 1989 Regents of the University of California.
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
u32 classifier
    Actions configured
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1950 buckets, 7800 max)
ctnetlink v0.93: registering with nfnetlink.
nf_conntrack_rtsp v0.6.21 loading
IPv4 over IPv4 tunneling driver
nf_nat_rtsp v0.6.21 loading
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
Bridge firewalling registered
Ebtables v2.0 registered
L2TP core driver, V2.0
PPPoL2TP kernel driver, V2.0
L2TP IP encapsulation support (L2TPv3)
L2TP netlink interface
L2TP ethernet pseudowire support (L2TPv3)
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
Northstar brcmnand NAND Flash Controller driver, Version 0.1 (c) Broadcom Inc. 2012
NAND device: Manufacturer ID: 0x98, Chip ID: 0xf1 (Toshiba NAND 128MiB 3,3V 8-bit)
Spare area=64 eccbytes 56, ecc bytes located at:
 2 3 4 5 6 7 8 9 10 11 12 13 14 15 18 19 20 21 22 23 24 25 26 27 28 29 30 31 34 
 35 36 37 38 39 40 41 42 43 44 45 46 47 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Available 7 bytes at (off,len):
(1,1) (16,2) (32,2) (48,2) (0,0) (0,0) (0,0) (0,0)
Scanning device for bad blocks
Bad eraseblock 768 at 0x000006000000
Options: NO_AUTOINCR,NO_READRDY,
Creating 1 MTD partitions on "brcmnand":
0x000003c00000-0x000008000000 : "brcmnand"
VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
devtmpfs: mounted
Freeing init memory: 200K
Failed to execute /sbin/preinit.  Attempting defaults...
*********************************************************************************
              _        _  __    _    __ _____ __   __ _____
             | |      | ||  \  | |  / // ____]\ \ / // ____]TM
             | |      | ||   \ | | / /| (___   \ V /| (____
             | |      | || |\ \| |\ \  \____ \  \ /  \____ \
             | |_____ | || | \   | \ \  ____) | | |   ____) |
             |_______||_||_|  \__|  \_\[____ /  |_|  [_____/

 (c) 2013 Belkin International, Inc. and/or its affiliates. All rights reserved.
 Booting r8v2 (firmware version 2.1.2.184309)
*********************************************************************************
[utopia][init] System Initialization
[utopia][init] Creating /proc
[utopia][init] Creating /sys
[utopia][init] Creating /dev
[utopia][init] Creating /tmp
[utopia][init] Allocating 40M for /tmp
[utopia][init] Prepairing /dev/pts
[utopia][init] Setting /tmp and /var permissions
[utopia][init] Starting udev..
bdutil board utility kernel module, version 1.4
bdutil board utility kernel module boardId (1)
bdutil board utility buttons kernel module, version 1.3
bdutil board utility LEDs kernel module, version 1.3
bdutil board utility usbhub kernel module, version 1.1
[utopia][init] Using persistent syscfg data from /var/config/syscfg
[utopia][init] Starting system logging
[utopia][init] Starting sysevent subsystem
[utopia][init] Setting any unset system values to default
Required nvram will be applied
[utopia] [init] set required nvram successful restored (/etc/system_nvram_defaults)
[utopia][init] no persistence config file (/var/config/pstcfg) found
[utopia][init] Late loading usb drivers
inserting ctf.ko
checking for interactive script start up...
[utopia][init] Starting bdutil daemon
attempting to sync sysinfo.cgi auth credentials
BDUTIL daemon mode (Olympus)
Sat Jul 28 17:10:00 UTC 2012
wan, sysevent received: wan-start

(none) login: RTNETLINK answers: Device or resource busy
configuring interfaces for IGMP filtering
wifi, sysevent received: lan-started
wifi, service_start()
Lighttpd Model Base: EA6350
Generating Rainier lighttpd config
Build temporary www configuration directory:
TSLIIHauhEfGE
[utopia] Not setting ppp_clamp_mtu
Power cycle Ethernet ports.
Duplicate configuration request

Registering Service myrouter._http._tcp.local port 80
Not ready for JNAP. Sleeping for 15 seconds...
Got a reply for myrouter._http._tcp.local.: Name now registered and active
wifi_scheduler, sysevent received (Sat Jul 28 10:10:29 PDT 2012)

### wps_wfi_init(): <wl0_wfi_enable=(null)><wl1_wfi_enable=(null)>WFI is not enabled ###
wifi, user vap eth1 is up
[utopia] Not setting ppp_clamp_mtu on dslite protocol
wifi, user vap eth2 is up
wifi, guest_enabled is set to 0, do not enable 2.4GHz guest
wan, sysevent received: phylink_wan_state
wifi, guest_enabled is set to 0, do not enable 5GHz guest
wifi_scheduler, sysevent received (Sat Jul 28 10:10:41 PDT 2012)
Restarting nfqrecv service...
[FW.sh] fwup_checked_after_boot: 0
[FW.sh] fwup_forced_update: 0
Starting smbd ...
[FW.sh] fwup_checked_after_boot: 0
[FW.sh] fwup_forced_update: 0
[FW.sh] fwup_checked_after_boot: 0
[FW.sh] fwup_forced_update: 0
[FW.sh] fwup_checked_after_boot: 0
[FW.sh] fwup_forced_update: 0
[FW.sh] fwup_checked_after_boot: 0
[FW.sh] fwup_forced_update: 0

Images