Netgear R6300 v1
(Redirected from Netgear R6300)
Jump to navigation
Jump to search
Netgear R6300 v1
Manuf (OEM/ODM): Foxconn U12H218 T00
FCC approval date: 09 May 2012
(Est.) release date: 16 May 2012
(Est.) initial retail price (in USD): $200
UPC: 606449084450 (UPC DB, On eBay)
Country of manuf.: Vietnam
Series: AC1750
Type: wireless router, bridge
FCC ID: PY312100188
IC ID: 4054A-12100188
PCB ID: U12H218T00
Power: 12 VDC, 5 A
Connector type: barrel
CPU1: Broadcom BCM4706 (600 MHz)
FLA1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Samsung K9F1G08U0D-SCB0)
FLA2: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX25L1606EM2I-12G)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Winbond W9751G6KB-25 × 2)
Expansion IFs: Mini PCIe, USB 2.0
Mini PCIe slots: 1
USB ports: 2
WI1 chip1: Broadcom BCM4331
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL
WI2 module: Foxconn T77H391
WI2 module IF: Mini PCIe (oversized)
WI2 chip1: Broadcom BCM4360
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 3x3:3
WI2 antenna connector: U.FL
ETH chip1: Broadcom BCM4706
Switch: Broadcom BCM53125
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn+ac
Additional chips
2.4GHz Power Amplifier IC;Skyworks;SE2605L;SiGe, 2605L, 151AJ;3;
5GHz Power Amplifier IC;Skyworks;SE5003L1;5003L1, 142AU;3;
Quad Differential PCIe Clock Source;IDT;ICS557G;ICS, 1226158, 1151,557G-05ALF;1;
4-port USB Hub Controller;SMSC;USB2514B;SMSC, USB2514B, D1204-A2P1G, 8J149413A, ASE-TW;1;
Stock FW OS: Linux 2.6.22
TPFirmware supported: DD-WRT • (List), DD-WRT (Kong-AC) • (List), Tomato (Shibby) • (List | DLs), Tomato (Hyzoom) • (Tomato (Shibby) mod)
Flags: boot log
Default SSID: NETGEARXX (35 addl. devices)
, NETGEARXX-5G (14 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1305 additional devices
of which 106 are Netgear devices
Default login user: admin
Default login password: password
admin:password credentials used by 423 additional devices
of which 304 are Netgear devices
802dot11 OUI: 84:1B:5E (8 E, 10 W), 9C:D3:6D, 10:0D:7F (1 E, 2 W)
Ethernet OUI: 84:1B:5E (8 E, 10 W), 9C:D3:6D, 10:0D:7F (1 E, 2 W)
| FCC ID | |
|---|---|
| Broadcom BCM94360MC | PY312100188 PY312100189 |
| Wistron NeWeb DNXB-C1 | PY312100188 |
| CPU1 brand | WI1 chip1 brand | WI2 chip1 brand | |
|---|---|---|---|
| Netgear R6300 v1 | Broadcom | Broadcom | Broadcom |
| Netgear R6300 v2 | Broadcom | Broadcom | Broadcom |
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
AC1750 Dual Band WiFi Smart Gigabit Router
There is a SMSC USB2514B USB 2.0 Hub on-board.
- OEM: Foxconn (Hon Hai) / Ambit U12H218T00
Wi-Fi Certified : WFA17018 (as of 12/10/2012)
HW Dissection
- Chipworks's dissection (nice images)
- Macronix MX25L1606EM2I-12G 16Mbit (2MB) Serial Flash
- Samsung K9F1G08U0D 1Gbit (128MB) NAND Flash
- Broadcom BCM53125 switch, SMSC USB25148 USB 2.0 Hub
- Foxconn P/N T77H391 BCM4360 wireless module (same P/N and
- Broadcom ref. design for the BCM4352 module in the Netgear R6200)
- silkscreened with "BCM94360MCH5" and the Foxconn P/N "T77H391"
- noted the dies for the BCM4360 and BCM4352 as being the same.
Reviews
- Default SSIDs of NETGEAR57 and NETGEAR57-5G
- indicates the switch chip is a Broadcom BCM53115
- (contradicted by the SkyWorks dissection below)
- 2.4GHz - Broadcom BCM4331 + 3x Skyworks SE2594L
- (Dual Band 802.11a/b/g/n Wireless LAN Front End)
- 5GHz - Broadcom BCM4360 + 3x Skyworks SE5003L
- (5GHz, 23dBm Power Amp w/ Power Detector)
- Reviewed on Foxnetwork (w/ photos [internal, external, and UI])
- 84:1B:5E OUI; NETGEARXX and NETGEARXX-5G SSIDs
Forum threads
- Kong's shot of the board w/ serial header connected on MyOpenRouter
- Shot of the header section on the DD-WRT forums
Other
- Processor noted as the Broadcom BCM4706
Additional info
GPIO
| Pin | Function | enable | disable |
|---|---|---|---|
| 15 | WAN LED (Internet) |
orange | green |
| 14 | unknown | ||
| 13 | unknown | ||
| 12 | unknown | ||
| 11 | Wireless LED (WiFi 5G) |
off | on |
| 10 | unknown | ||
| 9 | Right LOGO LED (WiFi 2.4G) |
off | on |
| 8 | USB LED | off | on |
| 7 | unknown | ||
| 6 | unknown | ||
| 5 | unknown | ||
| 4 | unknown | ||
| 3 | Power LED (amber) |
green | orange |
| 2 | Power LED (green) |
off | on |
| 1 | Left LOGO LED | off | on |
| 0 | unknown |
Use the following dd-wrt console startup script to turn off the NETGEAR logo.
gpio enable 9 gpio enable 1
Serial
Pinout
The serial header is J252.
J252 (3.3) (TxD) (...) (...) (RxD) (GND) Pin1 Pin2 Pin3 Pin4 Pin5 Pin6 | v to J251 (presumably JTAG)
Console dumps
| • /proc/mtd |
|---|
#cat /proc/mtd
dev: size erasesize name
mtd0: 00200000 00010000 "boot"
mtd1: 00140000 00010000 "linux"
mtd2: 00200000 00010000 "rootfs"
mtd3: 00010000 00010000 "ML1"
mtd4: 00010000 00010000 "ML2"
mtd5: 00010000 00010000 "ML3"
mtd6: 00010000 00010000 "ML4"
mtd7: 00010000 00010000 "ML5"
mtd8: 00010000 00010000 "ML6"
mtd9: 00010000 00010000 "ML7"
mtd10: 00010000 00010000 "T_Meter1"
mtd11: 00010000 00010000 "T_Meter2"
mtd12: 00010000 00010000 "POT"
mtd13: 00010000 00010000 "board_data"
mtd14: 00010000 00010000 "nvram"
mtd15: 02000000 00020000 "linux"
mtd16: 01ea787c 00020000 "rootfs"
mtd17: 02000000 00020000 "trx"
mtd18: 05f00000 00020000 "brcmnand"
# mount
rootfs on / type rootfs (rw)
/dev/root on / type squashfs (ro)
devfs on /dev type tmpfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
ramfs on /tmp type ramfs (rw)
usbdeffs on /proc/bus/usb type usbfs (rw)
# free
total used free shared buffers
Mem: 125552 55868 69684 0 4984
Swap: 0 0 0
Total: 125552 55868 69684
|
| • Boot log |
|---|
reboot
Decompressing...done
CFE for R6300 version: v1.0.4
Build Date: Tue Jun 26 16:05:40 CST 2012
Init Arena
Init Devs.
Boot partition size = 262144(0x40000)
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
et0: Broadcom BCM47XX 10/100/1000 Mbps Ethernet Controller 5.100.138
CPU type 0x19749: 600MHz
Tot mem: 131072 KBytes
Device eth0: hwaddr 10-0D-7F-80-89-45, ipaddr 192.168.1.1, mask 255.255.255.0
gateway not set, nameserver not set
Checking crc...Loader:raw Filesys:raw Dev:nflash0.os File: Options:(null)
Loading: ....... 4153478 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
Linux version 2.6.22 (lawrence@localhost.localdomain)
(gcc version 4.2.3) #1 PREEMPT Tue Mar 19 13:40:40 CST 2013
CPU revision is: 00019749
Found an ST compatible serial flash with 32 64KB blocks; total size 2MB
Determined physical RAM map:
memory: 07fff000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0 -> 32767
HighMem 32767 -> 32767
early_node_map[1] active PFN ranges
0: 0 -> 32767
Built 1 zonelists. Total pages: 32767
Kernel command line: root=/dev/mtdblock16 console=ttyS0,115200 init=/sbin/preinit
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 32kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
PID hash table entries: 512 (order: 9, 2048 bytes)
CPU: BCM5300 rev 1 at 600 MHz
Using 300.000 MHz high precision timer.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 125168k/131068k available (3177k kernel code,
5748k reserved, 646k data, 232k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
SCSI subsystem initialized
PCI: Initializing host
PCI: Reset RC
PCI: Initializing host
PCI: Reset RC
PCI: Fixing up bus 0
PCI/PCIe coreunit 0 is set to bus 1.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:01:00.1 (0004 -> 0006)
PCI: Fixing up bus 1
PCI/PCIe coreunit 1 is set to bus 2.
PCI: Fixing up bridge
PCI: Fixing up bridge
PCI: Enabling device 0000:02:00.1 (0004 -> 0006)
PCI: Fixing up bus 2
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
fuse init (API version 7.8)
io scheduler noop registered (default)
Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 8) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 8) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: module loaded
PPP generic driver version 2.4.2
NET: Registered protocol family 24
PPPoL2TP kernel driver, V0.17
pflash: found no supported devices
sflash: Couldn't find valid ROM disk image
Creating 15 MTD partitions on "sflash":
0x00000000-0x00200000 : "boot"
0x00000000-0x00140000 : "linux"
0x00000000-0x00200000 : "rootfs"
0x00140000-0x00150000 : "ML1"
0x00150000-0x00160000 : "ML2"
0x00160000-0x00170000 : "ML3"
0x00170000-0x00180000 : "ML4"
0x00180000-0x00190000 : "ML5"
0x00190000-0x001a0000 : "ML6"
0x001a0000-0x001b0000 : "ML7"
0x001b0000-0x001c0000 : "T_Meter1"
0x001c0000-0x001d0000 : "T_Meter2"
0x001d0000-0x001e0000 : "POT"
0x001e0000-0x001f0000 : "board_data"
0x001f0000-0x00200000 : "nvram"
Found a Samsung NAND flash with 2048B pages or 128KB blocks; total size 128MB
lookup_nflash_rootfs_offset: offset = 0x0
arch/mips/brcm-boards/bcm947xx/../../../../../../shared/
nflash.c:nflash_read 643 unrecovable error. by pass all
nflash: squash filesystem with lzma found at block 10
Creating 2 MTD partitions on "nflash":
0x00000000-0x02000000 : "linux"
0x00158784-0x02000000 : "rootfs"
NAND device: Manufacturer ID: 0xec, Chip ID: 0xf1 (Samsung NAND 128MiB 3,3V 8-bit)
Creating 2 MTD partitions on "brcmnand":
0x00000000-0x02000000 : "trx"
0x02000000-0x07f00000 : "brcmnand"
u32 classifier
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 10
6WIND/LSIIT IPv6 multicast forwarding 0.1 plus PIM-SM/SSM with *BSD API
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
sit0: Disabled Privacy Extensions
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 232k freed
Warning: unable to open an initial console.
Failed to execute /init
[sighandler]: No more events to be processed, quitting.
[cleanup]: Waiting for children.
[cleanup]: All children terminated.
Reading board data...
WSC UUID: 0xf3f02a167d67a04f3803cc8438dbecc6
NTP synchronized date/time: Mon Jul 8 01:49:30 2013
MAC address of 1st STA connected: C4-85-08-81-01-FA
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
wl: wl driver adapter not found
invalid RF magic!
No RF parameters! Use default.
### main:1176 Set Normal Power!
Initialise conn table 2048 entries
insmod: dpsta.ko: no module by that name found
insmod: wl_high.ko: no module by that name found
eth3: cmd=14: No such device
wl1 not up in 3 sec
Hit enter to continue...killall: upnp: no process killed
upnp: No such file or directory
WARNING: console log level set to 1
killall: wps_monitor: no process killed
killall: wps_ap: no process killed
killall: wps_enr: no process killed
### wps_wfi_init(): <wl0_wfi_enable=(null)><wl1_wfi_enable=(null)>WFI is not enabled ###
acsd: scan in progress ...
acsd: selected channel spec: 0x100b
Reading board data...
WSC UUID: 0xf3f02a167d67a04f3803cc8438dbecc6
acsd: scan in progress ...
info, udhcp server (v0.9.8) started
error, unable to parse 'option wins '
error, unable to parse 'option domain '
mevent start...
opened loopback socket 4
acsd: scan in progress ...
acsd: scan in progress ...
POT integrity check OK.
POT time is up.
result = 21
g_record_info1->numofrcd1 = 21
acsd: scan in progress ...
result = 271
g_record_info1->numofrcd2 = 271
result = 21
g_record_info2->numofrcd1 = 21
result = 271
g_record_info2->numofrcd2 = 271
acsd: scan in progress ...
shm ID: 32769
Get a correct Segment_ID: 32769 and semaphore ID:32769
acsd: scan in progress ...
Can't find handler for ASP command: eco_get_redirect_link();
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_control");
Can't find handler for ASP command: devices_cgi_get_acl_white_table();
Can't find handler for ASP command: devices_cgi_get_acl_black_table();
Can't find handler for ASP command: devices_cgi_get_show_access_ctrl_settings();
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_device", "wired");
Can't find handler for ASP command: devices_cgi_get_acl_device_table("DEV_device", "wireless");
acsd: scan in progress ...
Can't find handler for ASP command: usb_cgi_get_register_state();
Can't find handler for ASP command: usb_cgi_get_invite_state();
Can't find handler for ASP command: cdl_cgi_set_hijack(0);
Can't find handler for ASP command: cdl_cgi_set_hijack(1);
acsd: scan in progress ...
acsd: selected channel spec: 0x100b
insmod: cannot insert '/lib/modules/2.6.22/kernel/drivers/usb/core/usbcore.ko': Success (17)
insmod: cannot insert '/lib/modules/2.6.22/kernel/drivers/usb/host/ehci-hcd.ko': Success (17)
Info: No FWPT default policies.
agnat QOS disable!
rmmod: l7_filter
/tmp/samba/private/smb.conf: no files!
killall: bftpd: no process killed
add active user:192.168.5.100
httpd: socket bound in 0.0.0.0:80.
httpd: socket bound in 0.0.0.0:443.
bftpd: segment_id:32769
shared memory reattached at address 0x5000000
bftpd: socket bound in 0.0.0.0:21
mount: mounting none on /proc/bus/usb failed: Device or resource busy
IOCTL_AG_REGION_SET: English
Unable to create /dev/ptys0: File exists
Unable to create /dev/ttys0: File exists
ACOSNAT: Set BCMCTF to off
ACOSNAT: Set NAT for LAN domain only to on
killall: timesync: no process killed
NAT Enabled
pppd executed successfully. (0)
minidlan :scan files
route: ioctl 0x890c failed: No such process
killall: dhcp6c: no process killed
killall: IPv6-relay: no process killed
killall: pppdv6: no process killed
killall: rtsol: no process killed
killall: dhcp6s: no process killed
killall: radvd: no process killed
route: ioctl 0x890c failed: No such process
killall: dhcp6s: no process killed
killall: radvd: no process killed
Hit enter to continue...Hit enter to continue...
BusyBox v1.7.2 (2013-03-19 13:45:51 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
|
| • ps |
|---|
# ps
PID Uid VSZ Stat Command
1 0 2660 S /sbin/preinit
2 0 SW< [kthreadd]
3 0 SW< [ksoftirqd/0]
4 0 SW< [events/0]
5 0 SW< [khelper]
16 0 SW< [kblockd/0]
47 0 SW [pdflush]
48 0 SW [pdflush]
49 0 SW< [kswapd0]
50 0 SW< [aio/0]
600 0 SW< [mtdblockd]
1996 0 SW< [ksuspend_usbd]
1999 0 SW< [khubd]
2148 0 1540 S /bin/eapd
2151 0 2140 S nas
2155 0 3176 S /bin/wps_monitor
2174 0 1648 S /usr/sbin/acsd
2214 0 1756 S swresetd
2216 0 1600 S dnsRedirectReplyd
2218 0 1896 S dlnad
2223 0 824 S dnsmasq -h -n -c 0 -N -i br0 -r /tmp/resolv.conf -u r
2226 0 844 S udhcpd /tmp/udhcpd.conf
2229 0 2252 S mevent
2232 0 1600 S ddnsd &
2235 0 1608 S telnetenabled
2238 0 2256 S heartbeat
2245 0 1528 S wlanconfigd
2251 0 2020 S tfmeter run
2255 0 1600 S scheact
2258 0 2648 S upnpd
2261 0 1996 S /usr/sbin/email
2264 0 1668 S lld2d br0
2266 0 2252 S /usr/sbin/acl_logd
2273 0 1996 S check_fw
2275 0 8328 S httpd -S -E /usr/sbin/ca.pem /usr/sbin/httpsd.pem
2362 0 1588 S /usr/sbin/bftpd -D -c /tmp/bftpd.conf
2364 0 9912 S minidlna.exe -a 192.168.5.1/24 -f /tmp/minidlna.conf
2368 0 SW [ telnetDBGD ]
2369 0 SW [ acktelnetDBGD ]
2370 0 SW [checkSBusTimeou]
2372 0 DW [NU INITSOCK]
2375 0 SW [NU UDP]
2376 0 SW [NU TCP]
2387 0 1948 S pppd file /tmp/ppp/options
2401 0 1596 S /usr/sbin/timesync /sbin/ntpclient
2402 0 9912 S minidlna.exe -a 192.168.5.1/24 -f /tmp/minidlna.conf
2407 0 9912 S minidlna.exe -a 192.168.5.1/24 -f /tmp/minidlna.conf
2438 0 1588 S wpsd
2440 0 1928 S /bin/sh
2443 0 1920 R ps
|
