Sagemcom F@ST 3764
Sagemcom F@ST 3764
Availability: now
(Est.) release date: September 2011
Type: wireless router, analog phone gateway, dsl modem
FCC ID: M4Y-XN625V01
Power: 12 VDC, 2 A
Connector type: barrel
CPU1: Ikanos IKF6850
FLA1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (Elpida D5116AHTA-5B-F × 2)
Expansion IFs: USB 2.0, Mini PCI
Mini PCI slots: 1
USB ports: 1
Serial: yes
WI1 module: Z-Com XN-625
WI1 module IF: Mini PCI
WI1 chip1: Atheros AR9227
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL
ETH chip1: Ikanos IKF6850
Switch: Marvell 88E6161
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
bgn
Stock FW OS: Linux 2.6.16.26
Flags: ADSL2+, VDSL
FCC ID | |
---|---|
Z-Com XN-625 | M4Y-XN625V01 |
For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.
For a list of all currently documented Ikanos chipsets with specifications, see Ikanos.
Wireless N300 ADSL2+ Modem Router
Boot log
• bootlog • >> |
---|
SAGEM Secure-boot SU2_2_1 fast_3764 CPU: IKANOS Fusiv 180 Family PCI: 33 MHz DRAM: 128 MB Flash: 32 MB Using default environment In: serial Out: serial Err: serial Net: emac2 Marvell 88e6161 initialized as hub MCU awaken (22) MCU v.8 initialized 9600bps on port 2 emac2 Permanent parameters are programmed but not activated : skip DSA signature Potential firmware found at address : bf080000 half-flash parsed ! Potential firmware found at address : be000000 Found 2 firmwares ! Searching valid operational firmware Operational Firmware found with no key at address be000000 good regular firmware at @0xBE000000 with key @0x00000000 No bootloader arg partition not moved updating kernel args bootargs root=/dev/mtdblock6 ro rootfstype=squashfs operational_start=0xbe000000 rescue_start=0xbf080000 myfs_start=0xbe940000 type=operational image_addr=0xBE000000 kernel args update done Launch regular code from flash alarmLEDMode(E_FLASH)! bootm BE000140 ## Booting image at be000140 ... Image Name: TPSA_v8058.img Created: 2011-08-10 9:44:06 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 9577942 Bytes = 9.1 MB Load Address: 80010000 Entry Point: 802e5000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel ... Linux version 2.6.16.26 #1 Wed Aug 10 10:44:02 CET 2011 argc 9 arg <NULL> env memsize=128 memsize board_memsize = 128 env memsize=128 env initrd_start=0xA0000000 env initrd_size=0x0 flash_start be000000 env flash_start=0xBE000000 board_flash_size 2000000 env flash_size=0x2000000 arg[1] root=/dev/mtdblock6 arg[2] ro arg[3] rootfstype=squashfs arg[4] operational_start=0xbe000000 arg[5] rescue_start=0xbf080000 arg[6] myfs_start=0xbe940000 arg[7] type=operational arg[8] image_addr=0xBE000000 CPU revision is: 0001964c Determined physical RAM map: memory: 07800000 @ 00000000 (usable) Built 1 zonelists Kernel command line: console=ttyS0,115200 root=/dev/mtdblock6 ro rootfstype=squashfs operational_start=0xbe000000 rescue_start=0xbf080000 myfs_start=0xbe940000 type=operational image_addr=0xBE000000 Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes. Primary data cache 32kB, 4-way, linesize 32 bytes. Synthesized TLB refill handler (20 instructions). Synthesized TLB load handler fastpath (32 instructions). Synthesized TLB store handler fastpath (32 instructions). Synthesized TLB modify handler fastpath (31 instructions). Cache parity protection disabled PID hash table entries: 512 (order: 9, 8192 bytes) Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) Memory: 109752k/122880k available (2368k kernel code, 12992k reserved, 527k data, 132k init, 0k highmem) Mount-cache hash table entries: 512 Checking for 'wait' instruction... available. NET: Registered protocol family 16 Fusiv PCI: starting... SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub Bluetooth: Core ver 2.8 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized fs/cramfs_block_uncompressed created NTFS driver 2.1.26 [Flags: R/O]. 08x, <6>Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered Random: 0x849a9548 Serial: 8250/16550 driver $Revision: 1.9.6.1 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO map 0xb9020000 mem 0xb9020000 (irq = 6) is a 16450 serial8250: ttyS1 at MMIO map 0xb90a0000 mem 0xb90a0000 (irq = 29) is a 16450 ikf68xx-ehci-hcd ikf68xx-ehci-hcd.0: Ikanos On-Chip EHCI Host Controller ikf68xx-ehci-hcd ikf68xx-ehci-hcd.0: new USB bus registered, assigned bus number 1 ikf68xx-ehci-hcd ikf68xx-ehci-hcd.0: irq 35, io mem 0x19230000 ikf68xx-ehci-hcd ikf68xx-ehci-hcd.0: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ikf68xx-ohci-hcd ikf68xx-ohci-hcd.0: Ikanos On-Chip OHCI Host Controller ikf68xx-ohci-hcd ikf68xx-ohci-hcd.0: new USB bus registered, assigned bus number 2 ikf68xx-ohci-hcd ikf68xx-ohci-hcd.0: irq 35, io mem 0x19240800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new driver usblp /home/G545662/37XX/SRC/1.0.5_RC1/checkoutdir/openrg/package/rg/os/linux-2.6/ drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. u32 classifier OLD policer on NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 4096 (order: 2, 16384 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 4096 bind 4096) TCP reno registered IPv4 over IPv4 tunneling driver GRE over IPv4 tunneling driver NET: Registered protocol family 1 NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.5 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM ver 1.7 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast NET: Registered protocol family 8 NET: Registered protocol family 20 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com> All bugs added by David S. Miller <davem@redhat.com> openrg_flash: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 openrg_flash: CFI does not contain boot bank location. Assuming top. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Creating 1 MTD partitions on "openrg_flash": 0x00000000-0x02000000 : "openrg" openrg_flash: detected at 0x1e000000 size 33554432 bytes Freeing unused kernel memory: 132k freed Version: 4.9.4.TPSA_v8058 Platform: Sagem 376X GE Compilation Time: 10-Aug-11 09:31:28 Tag: NRD_?bldorg?rg_liveboxPro-V3_0-0-1 Compilation Flags: SOUCHE_DEVICE_DISCOVERY=y CONFIG_TELEFONICA=y CONFIG_VDSL=y CONFIG_ROUTING_WITH_DSPRULES=y CONFIG_37xx_STANDARD=y CONFIG_RGCONF_MIGRATION=y CONFIG_SOUCHE_RECONF=y CONFIG_RG_DB_SEMAPHORE=y CONFIG_SAGEM_DB_ACCESS=y CONFIG_DEFAULT_RGCONF_TELNET=y CONFIG_RG_TELNETS=y CONFIG_SAGEM_IPPRINT=y CONFIG_USB_PRINTER=y CONFIG_HFS_FS=y CONFIG_HFSPLUS_FS=y CONFIG_SAGEM_WIFI_MODE_11N=y CONFIG_LIVEBOX_VOIP=y CONFIG_LOG_ENTITIES=0 CONFIG_KALLSYMS=y CONFIG_RG_GDBSERVER=y CONFIG_LIVEBOX_TV=y CONFIG_SOUCHE_USE_EXTERNAL_OPENSSL=y DIST=SAGEM_376X CONFIG_TPSA=y CONFIG_INTERNAL_FIRMWARE_VERSION=1.1.0.5 CONFIG_FIRMWARE_VERSION=TPSA_v8058 LIC=../../../license/jpkg_ikanos_vx.lic User Information: G545662@sst-ESPRIMO-P2760 /home/G545662/37XX/SRC/1.0.5_RC1/checkoutdir/openrg/package/rg ############### xdsl_mode = 1 ###################### ###### Kernel Debug mode (rg_conf/kernel/debug) = 0 ###### ADSL LED controlled by interface eth2 WAN LED controlled by interface ppp0 insmod: add-symbol-file build/debug/hard_watchdog_module.o 0xc0004000 -s .data 0xc0005800 -s .bss 0xc0005940 HardwareWatchdogInitialize : NORMAL BOOT HardwareWatchdogInitialize :: --- WATCHDOG -- INITIALIZED with ED72 value (i.e. 5999ms) HardwareWatchdogInitialize :: --- WATCHDOG -- Pacify timer of 2000 ms STARTED insmod: add-symbol-file build/debug/be_pppoa_mod.o 0xc0007000 -s .data 0xc00086e0 -s .bss 0xc0008840 insmod: add-symbol-file build/debug/fusivlib.o 0xc0022000 -s .data 0xc002eaf0 -s .bss 0xc0030e80 fusiv library initializing... Buffer Copy Through DMA is enabled fusiv library initialized SUCCESSFULLY... insmod: add-symbol-file build/debug/bus_arbiter_lkm.o 0xc000a000 -s .data 0xc000b380 -s .bss 0xc000b4e0 vox bus arbiter interrupt handlers registered insmod: add-symbol-file build/debug/opensrc_lkm.o 0xc0002000 -s .data 0xc00026d0 -s .bss 0xc0002820 insmod: add-symbol-file build/debug/bm.o 0xc0014000 -s .data 0xc0017170 -s .bss 0xc0017340 Buffer Manager is initializing... BMU GIGE clock Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0000 Load into BM APU Successful !!! Buffer Manager initialized SUCCESSFULLY... insmod: add-symbol-file build/debug/sysutil.o 0xc0019000 -s .data 0xc001c0c0 -s .bss 0xc001c220 insmod: add-symbol-file build/debug/timerlib.o 0xc0010000 -s .data 0xc0010dc0 -s .bss 0xc0010f20 Timers are getting initalized Timers are initilized SUCCESSFULLY... insmod: add-symbol-file build/debug/ethdriver.o 0xc0044000 -s .data 0xc004baf0 -s .bss 0xc004e8c0 Module params: eth0_mii=0 eth1_mii=0 eth0: Netpro Sierra Ethernet found at 0xb9110000, irq 14 GIGE 1 clock dev->baseAddr b9110000 Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0010 eth1: Netpro Sierra Ethernet found at 0xb9150000, irq 13 GIGE 2 clock dev->baseAddr b9150000 Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0020 eth0 interface configured in GMII mode Ethernet Driver is initialized SUCCESSFULLY eth1 interface configured in GMII mode insmod: add-symbol-file build/debug/vdsldriver_lkm.o 0xc003c000 -s .data 0xc003f9e0 -s .bss 0xc0040ec0 VDSL AP and VDSL PHY clocks are enabled eth2: Netpro VDSL Ethernet found at 0x0, irq 36 >>> bmChangeMacList currNumConfiguredMacAddrs = 0 MAX_NUM_SUPPORTED_MAC_ADDRESSES = 4 0x0:0x1:0x2:0x3:0x4:0x7 User parameters for VDSL AP configured successfully Slave Mem Alloc: Req size 16 Ptr2Block 0x191f0030 VDSL AP started successfully VDSL Driver is initialized SUCCESSFULLY insmod: add-symbol-file build/debug/periap.o 0xc0050000 -s .data 0xc0051c20 -s .bss 0xc0053c60 periApDriverInit: doneSlave Mem Alloc: Req size 16 Ptr2Block 0x191f0040 *******LOAD firmware to AP:PERI_ID result:0Load into PERI_AP APU Successful !!! insmod: add-symbol-file build/debug/ath_hal.o 0xc00e1000 -s .data 0xc014e550 -s .bss 0xc0158e80 ath_hal: 0.9.14.25 (AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, DEBUG, REGOPS_FUNC) insmod: add-symbol-file build/debug/wlan.o 0xc015c000 -s .data 0xc0199b20 -s .bss 0xc019a200 wlan: 0.8.4.2 (Atheros/multi-bss) insmod: add-symbol-file build/debug/ath_rate_atheros.o 0xc0066000 -s .data 0xc006b970 -s .bss 0xc0074440 ath_rate_atheros: Version 2.0.1 Copyright (c) 2001-2004 Atheros Communications, Inc, All Rights Reserved insmod: add-symbol-file build/debug/ath_dfs.o 0xc0076000 -s .data 0xc007ec00 -s .bss 0xc007ed80 ath_dfs: Version 2.0.0 Copyright (c) 2005-2006 Atheros Communications, Inc. All Rights Reserved insmod: add-symbol-file build/debug/wlan_wep.o 0xc000d000 -s .data 0xc000e800 -s .bss 0xc000e940 insmod: add-symbol-file build/debug/wlan_tkip.o 0xc0055000 -s .data 0xc00583c0 -s .bss 0xc0058500 insmod: add-symbol-file build/debug/wlan_ccmp.o 0xc001e000 -s .data 0xc00201e0 -s .bss 0xc0020320 insmod: add-symbol-file build/debug/wlan_xauth.o 0xc0033000 -s .data 0xc0033300 -s .bss 0xc0033440 insmod: add-symbol-file build/debug/wlan_acl.o 0xc0038000 -s .data 0xc0039010 -s .bss 0xc0039160 wlan: mac acl policy registered insmod: add-symbol-file build/debug/ath_pci.o 0xc019c000 -s .data 0xc01c7730 -s .bss 0xc01c8320 ath_pci: 0.9.4.5 (Atheros/multi-bss) ath_pci: CR-LSDK-1.3.1.110 PCI: Enabling device 0000:00:02.0 (0000 -> 0002) Chan Freq RegPwr HT CTL CTL_U CTL_L DFS 1 2412n 20 HT20 1 0 1 N 1 2412n 20 HT40 1 0 1 N 2 2417n 20 HT40 1 0 1 N 3 2422n 20 HT40 1 1 1 N 4 2427n 20 HT40 1 1 1 N 5 2432n 20 HT40 1 1 1 N 6 2437n 20 HT40 1 1 1 N 7 2442n 20 HT40 1 1 1 N 8 2447n 20 HT40 1 1 1 N 9 2452n 20 HT40 1 1 1 N 10 2457n 20 HT40 1 1 1 N 11 2462n 20 HT40 1 1 1 N 12 2467n 20 HT40 1 1 0 N 13 2472n 20 HT40 1 1 0 N dfs_init_radar_filters: dfs->dfs_rinfo.rn_numradars: 0 DFS min filter rssiThresh = 21 DFS max pulse dur = 131 ticks wifi0: 11ng rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps wifi0: 11ng MCS: 0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15 wifi0: mac 384.2 phy 15.15 radio 12.0 wifi0: Use hw queue 1 for WME_AC_BE traffic wifi0: Use hw queue 0 for WME_AC_BK traffic wifi0: Use hw queue 2 for WME_AC_VI traffic wifi0: Use hw queue 3 for WME_AC_VO traffic wifi0: Use hw queue 8 for CAB traffic wifi0: Use hw queue 9 for beacons wifi0: Use hw queue 7 for UAPSD wifi0: Atheros 9287: mem=0x1a000000, irq=25 hw_base=0xba000000 insmod: add-symbol-file build/debug/one_module.o 0xc0249000 -s .main_flow 0xc02856c0 -s .data 0xc02a4e50 -s .bss 0xc02a6ce0 Loading license 2e7cce03ae1ecdf8664e2a9d4237505fb4b92a03b3c702e282dad8703897fb79647f254aad168a0000 42689d4bbeae320ee12b21d44036dba65548ebd421923317a5e6fd3f30792f5c8c58b63fbb65f614a9b3010287.SAGEM loading license key: SAGEM loading license key: SAGEM insmod: add-symbol-file build/debug/kleds_mod.o 0xc0035000 -s .data 0xc00364c0 -s .bss 0xc0036640 insmod: add-symbol-file build/debug/lb_jffs_mod.o 0xc0042000 -s .data 0xc0042200 -s .bss 0xc0042360 Creating 1 MTD partitions on "openrg_flash": 0x01b00000-0x02000000 : "jffs2" Press ESC to enter BOOT MENU mode. dd_openrg_init: registering openrg device discovery entity MAPS: 00400000-007d5000 r-xp 00000000 00:09 861352 /mnt/cramfs/bin/openrg 10000000-1006d000 rw-p 003d5000 00:09 861352 /mnt/cramfs/bin/openrg 1006d000-10091000 rwxp 1006d000 00:00 0 [heap] 2aaa8000-2aaae000 r-xp 00000000 00:09 5203032 /mnt/cramfs/lib/ld-uClibc.so.0 2aaae000-2aaaf000 rw-p 2aaae000 insmod: add-symbol-file build/debug/wlan_scan_ap.o 0xc0080000 -s .data 0xc0083910 -s .bss 0xc0083a60 00:00 0 2aab0000-2aab1000 rw-p 2aab0000 00:00 0 2aab2000-2aab3000 rw-s 00000000 00:06 0 /SYSV0000162e (deleted) 2aab4000-2aab5000 rw-s 00000000 00:06 32769 /SYSV0000162d (deleted) 2aaed000-2aaee000 rw-p 00005000 00:09 5203032 /mnt/cramfs/lib/ld-uClibc.so.0 2aaee000-2ab03000 r-xp 00000000 00:09 6258740 /mnt/cramfs/lib/libopenrg.so 2ab03000-2ab43000 ---p 2ab03000 insmod: add-symbol-file build/debug/hw_qos_ikanos_mod.o 0xc0060000 -s .data 0xc0060900 -s .bss 0xc0060a80 00:00 0 2ab43000-2ab44000 rw-p 00015000 00:09 6258740 /mnt/cramfs/lib/libopenrg.so 2ab44000-2ab81000 r-xp 00000000 00:09 5975448 /mnt/cramfs/lib/libjutil.shw_qos_init:183 init module o 2ab81000-2abc1000 ---p 2ab81000 00:00 0 2abc1000-2abc6000 rw-p 0003d000 00:09 5975448 /mnt/cramfs/lib/libjutil.so 2abc6000-2abcc000 rw-p 2abc6000 00:00 0 2abcc000-2ac0a000 r-xp 00000000 00:09 6343272 /mnt/cramfs/lib/libssl.so.0.9.8 2ac0a000-2ac49000 ---p 2ac0a000 00:00 0 2ac49000-2ac4d000 rw-p 0003d000 00:09 6343272 /mnt/cramfs/lib/libssl.so.0.9.8 2ac4d000-2ad8f000 r-xp 00000000 00:09 5439004 /mnt/cramfs/lib insmod: add-symbol-file build/debug/igmp_proxy_mod.o 0xc0090000 -s .data 0xc0096ef0 -s .bss 0xc0097040 /libcrypto.so.0.9.8 2ad8f000-2adce000 ---p 2ad8f000 00:00 0 2adce000-2ade4000 rw-p 00141000 00:09 5439004 /mnt/cramfs/lib/libcrypto.so.0.9.8 2ade4000-2ade7000 rw-p 2ade4000 00:00 0 2ade7000-2adea000 r-xp 00000000 00:09 5906848 /mnt/cramfs/lib/libdl.so.0 2adea000-2ae29000 ---p 2adea000 00:00 0 2ae29000-2ae2a000 rw-p 00002000 00:09 5906848 /mnt/cramfs/lib/libdl.so.0 2ae2a000-2ae3f000 r-xp 00000000 00:09 6313776 /mnt/cramfs/lib/librg_config.so 2ae3f000-2ae7e000 ---p 2ae3f000 00:00 0 2ae7e000-2ae81000 rw-p 00014000 00:09 6313776 /m insmod: add-symbol-file build/debug/rg_usfs.o 0xc0085000 -s .data 0xc0086500 -s .bss 0xc0086680 nt/cramfs/lib/librg_config.so 2ae81000-2aeaf000 r-xp 00000000 00:09 6061520 /mnt/cramfs/lib/libm.so.0 2aeaf000-2aeef000 ---p 2aeaf000 00:00 0 2aeef000-2aef0000 rw-p 0002e000 00:09 6061520 /mnt/cramfs/lib/libm.so.0 2aef0000-2aef2000 r-xp 00000000 00:09 6511232 /mnt/cramfs/lib/libutil.so.0 2aef2000-2af31000 ---p 2aef2000 00:00 0 2af31000-2af32000 rw-p 00001000 00:09 6511232 /mnt/cramfs/lib/libutil.so.0 2af3 insmod: add-symbol-file build/debug/tcp_mss.o 0xc0000000 -s .data 0xc0000a00 -s .bss 0xc0000b80 2000-2af73000 r-xp 00000000 00:09 5227592 /mnt/cramfs/lib/libSwitch.so 2af73000-2afb2000 ---p 2af73000 00:00 0 2afb2000-2afb3000 rw-p 00040000 00:09 5227592 /mnt/cramfs/lib/libSwitch.so 2afb3000-2afbd000 r-xp 00000000 00:09 6090768 /mnt/cramfs/lib/libmsg-api.so 2afbd000-2affc000 ---p 2afbd000 00:00 0 2affc000-2affd000 rw-p 00009000 00:09 6090768 /mnt/cramfs/lib/libmsg-api.so 2affd00 insmod: add-symbol-file build/debug/rg_dhcp_pktfil.o 0xc0088000 -s .data 0xc0089440 -s .bss 0xc00895c0 0-2b00a000 rw-p 2affd000 00:00 0 2b00a000-2b01b000 r-xp 00000000 00:09 6297412 /mnt/cramfs/lib/libpthread.so.0 2b01b000-2b05a000 ---p 2b01b000 00:00 0 2b05a000-2b05f000 rw-p 00010000 00:09 6297412 /mnt/cramfs/lib/libpthread.so.0 2b05f000-2b061000 rw-p 2b05f000 00:00 0 2b061000-2b064000 r-xp 00000000 00:09 6501972 /mnt/cramfs/lib/libtr69If.so 2b064000-2b0a3000 ---p 2b064000 0 insmod: add-symbol-file build/debug/rg_ipv4.o 0xc0064000 -s .data 0xc0064440 -s .bss 0xc00645c0 0:00 0 2b0a3000-2b0a4000 rw-p 00002000 00:09 6501972 /mnt/cramfs/lib/libtr69If.so 2b0a4000-2b149000 r-xp 00000000 00:09 5296460 /mnt/cramfs/lib/libIPV4 device driver registered c.so.0 2b149000-2b189000 ---p 2b149000 00:00 0 2b189000-2b18b000 rw-p 000a5000 00:09 5296460 /mnt/cramfs/lib/libc.so.0 2b18b000-2b18f000 rw-p 2b18b000 00:00 0 2b18f000-2b19d000 r-xp 00000000 00:09 5947060 /mnt/cramfs/lib/libgcc_s.so.1 2b19d000-2b1dd000 ---p 2b19d000 00:00 0 2b1dd000-2b1de0 insmod: add-symbol-file build/debug/pppoe_relay.o 0xc009f000 -s .data 0xc00a2670 -s .bss 0xc00a27c0 00 rw-p 0000e000 00:09 5947060 /mnt/cramfs/lib/libgcc_s.so.1 2b1de000-2b3de000 rw-p 2b1de000 00:00 0 7fe71000-7fe86000 rwxp 7fe71000 00:00 0 [stack] insmod: add-symbol-file build/debug/rg_pppoe_relay.o 0xc0062000 -s .data 0xc0062da0 -s .bss 0xc0062f20 insmod: add-symbol-file build/debug/ife6DriverLoad_mod.o 0xc008d000 -s .data 0xc008d440 -s .bss 0xc008d5c0 Initializing IFE6 Driver Load module insmod: add-symbol-file build/debug/btn.o 0xc008b000 -s .data 0xc008bc20 -s .bss 0xc008bdc0 insmod: add!!! DSP Ver No:1.1 Initialization SLIC system Initializing Voice slic GPIO is 7 Initializing SPI Module SAGEM SLIC card as SILABS Initializing SLICs LOAD Si3226 PATCH for Rev C Si3226 patch version 0X06102008 Patch loaded successfully channel 0 Patch loaded successfully channel 1 MDAC Calibration for channel 0 MDAC Calibration for channel 1 other Calibration Activate SLICs => 2 # DSP Voice Module Part 2 Loading Ok ################################################## insmod: add-symbol-file build/debug/rtp.o 0xc00cd000 -s .data 0xc00d7d00 -s .bss 0xc00d87c0 ################################################## # RTP Stack Module Loading ... Register /dev/rtp Device ...Register /sys/sagem/rtp SysCtl ... insmod: cannot open module `/lib/modules/relay.o': No such file or directory Permanent Parameters were stored in Rgconf RAM __BEI:config_xdsl_mode:xdslmode=1,autodetect=2__ __BEI:VDSL config_xdsl_mode:xdslmode=1,autodetect=2__ wifi_init: Atheros Wifi card: device AR5416_DEVID_AR9287_PCI (Kiwi). Atheros Wifi card found: ath0 wlanconfig: ioctl: No such device mt_ma_open : entering in ------------------- mt_ma_start_process : entering in ------------------- opening reconfentity Entity MAIN AUTOM ID IS 345 warning #1 :new rg_conf entry but not signaled warning #1 :new rg_conf entry but not signaled warning #1 :new rg_conf entry but not signaled warning #1 :new rg_conf entry but not signaled warning #1 :new rg_conf entry but not signaled warning #1 :new rg_conf entry but not signaled warning #1 :new rg_conf entry but not signaled warning #1 :new rg_conf entry but not signaled ------>dev_if_notify : <eth1> [0 -> 1] ------>dev_if_notify : <eth1.1> [0 -> 1] ------>dev_if_notify : <br0> [0 -> 1] ------>dev_if_notify : <eth0> [0 -> 1] ------>dev_if_notify : <wifi0> [0 -> 1] ------>dev_if_notify : <ath0> [0 -> 1] ------>dev_if_notify : <eth2> [0 -> 1] ------>dev_if_notify : <eth2.35> [0 -> 1] ------>dev_if_notify : <eth2.838> [0 -> 1] ------>dev_if_notify : <eth2.839> [0 -> 1] ------>dev_if_notify : <eth0.35> [0 -> 1] ------>dev_if_notify : <eth0.838> [0 -> 1] ------>dev_if_notify : <eth0.839> [0 -> 1] ------>dev_if_notify : <eth1.839> [0 -> 1] ------>dev_if_notify : <dsl0> [0 -> 1] ------>dev_if_notify : <ethoa0> [0 -> 1] ------>dev_if_notify : <ethoa1> [0 -> 1] ------>dev_if_notify : <br1> [0 -> 1] ------>dev_if_notify : <ppp0> [0 -> 1] ------>dev_if_notify : <ppp1> [0 -> 1] ------>dev_if_notify : <br0> [1 -> 2] ------>dev_if_notify : <br0> [2 -> 3] ------>dev_if_notify : <br0> [3 -> 4] OS: VDSL daemon already running Access: Failed to open bme module ------>dev_if_notify : <eth0> [1 -> 2] ------>dev_if_notify : <eth0> [2 -> 3] ------>dev_if_notify : <eth0> [3 -> 4] ------>dev_if_notify : <eth1> [1 -> 2] ------>dev_if_notify : <eth1> [2 -> 3] ------>dev_if_notify : <eth1> [3 -> 4] ------>dev_if_notify : <wifi0> [1 -> 2] ------>dev_if_notify : <wifi0> [2 -> 3] ------>dev_if_notify : <wifi0> [3 -> 4] ------>dev_if_notify : <ath0> [1 -> 2] Unset HTIE 11n in beacon <6>ar9287EepromSetPowerPerRateTable: Reg power: 20 dBm Net ant gain allowed: 0 dB ar9287EepromSetPowerPerRateTable: Power Limit (Reg power - Net ant gain): 20 dBm ar9287EepromSetPowerPerRateTable: Number of chains: 2 Per chain power limit: 17 dBm ar9287EepromSetPowerPerRateTable: Target powers: 1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm ar9287EepromSetPowerPerRateTable: syn 2412 ctl 2412 ext 2412 is40 0 ar9287EepromSetPowerPerRateTable: Ctl mode: 1 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 2 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 5 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Chosen powers:1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm 2xMaxPowerLevel: 37 (LEG) ar9287EepromSetPowerPerRateTable: Reg power: 20 dBm Net ant gain allowed: 0 dB ar9287EepromSetPowerPerRateTable: Power Limit (Reg power - Net ant gain): 19 dBm ar9287EepromSetPowerPerRateTable: Number of chains: 2 Per chain power limit: 16 dBm ar9287EepromSetPowerPerRateTable: Target powers: 1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm ar9287EepromSetPowerPerRateTable: syn 2412 ctl 2412 ext 2412 is40 0 ar9287EepromSetPowerPerRateTable: Ctl mode: 1 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 2 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 5 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Chosen powers:1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm 2xMaxPowerLevel: 37 (LEG) JXU: set the rxBufsize to 3851 ath_newstate: Resetting VAP dfswait_run ath_newstate: Resetting VAP dfswait_run ar9287EepromSetPowerPerRateTable: Reg power: 20 dBm Net ant gain allowed: 0 dB ar9287EepromSetPowerPerRateTable: Power Limit (Reg power - Net ant gain): 19 dBm ar9287EepromSetPowerPerRateTable: Number of chains: 2 Per chain power limit: 16 dBm ar9287EepromSetPowerPerRateTable: Target powers: 1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm ar9287EepromSetPowerPerRateTable: syn 2457 ctl 2457 ext 2457 is40 0 ar9287EepromSetPowerPerRateTable: Ctl mode: 1 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 2 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 5 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Chosen powers:1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm 2xMaxPowerLevel: 37 (LEG) ath_chan_set: Changing to channel 2457, Flags 30080, PF 0 JXU: set the rxBufsize to 3851 device ath0 entered promiscuous mode ------>dev_if_notify : <ath0> [2 -> 3] ------>dev_if_notify : <ath0> [3 -> 4] ------>dev_if_notify : <eth2.35> [1 -> 2] eth2.35: Setting MAC address to 94 fe f4 a9 75 83. device eth2 entered promiscuous mode VLAN (eth2.35): Setting underlying device (eth2) to promiscious mode. ------>dev_if_notify : <eth2.838> [1 -> 2] eth2.838: Setting MAC address to 94 fe f4 a9 75 84. ------>dev_if_notify : <eth2.839> [1 -> 2] eth2.839: Setting MAC address to 94 fe f4 a9 75 85. ------>dev_if_notify : <eth2> [1 -> 2] ------>dev_if_notify : <eth1.1> [1 -> 2] eth1.1: Setting MAC address to 94 fe f4 a9 75 82. VLAN (eth1.1): Underlying device (eth1) has same MAC, not checking promiscious mode. eth1.1: Setting MAC address to 94 fe f4 a9 75 82. VLAN (eth1.1): Underlying device (eth1) has same MAC, not checking promiscious mode. eth1.1: dev_set_promiscuity(master, 1) device eth1 entered promiscuous mode device eth1.1 entered promiscuous mode ------>dev_if_notify : <eth1.1> [2 -> 3] ------>dev_if_notify : <eth1.1> [3 -> 4] ------>dev_if_notify : <eth1.839> [1 -> 2] eth1.839: Setting MAC address to 94 fe f4 a9 75 82. VLAN (eth1.839): Underlying device (eth1) has same MAC, not checking promiscious mode. eth1.839: Setting MAC address to 94 fe f4 a9 75 82. VLAN (eth1.839): Underlying device (eth1) has same MAC, not checking promiscious mode. eth1.839: dev_set_promiscuity(master, 1) ------>dev_if_notify : <eth1.839> [2 -> 3] ------>dev_if_notify : <eth1.839> [3 -> 4] ------>dev_if_notify : <br1> [1 -> 2] ------>dev_if_notify : <br1> [2 -> 3] ------>dev_if_notify : <br1> [3 -> 4] ------>dev_if_notify : <ppp0> [1 -> 2] __BEI:load_rgconf_switch_config called__ __BEI:sg_switch_check_config called__ __BEI:sg_switch_write_config_files called__ __BEI:sg_switch_parse_config called__ __BEI:sg_switch_set_mode called__ __BEI:sg_switch_run_config called__ ../../common/MasterControl/Info.cpp(188):Read WSC Config File:/etc/wsc_config.txt ../../common/MasterControl/Info.cpp(1529):Use eth0 address 94:fe:f4:a9:75:81 ../../common/MasterControl/Info.cpp(188):Read WSC Config File:/etc/wsc_config.txt ../../common/MasterControl/Info.cpp(1529):Use eth0 address 94:fe:f4:a9:75:81 ../../common/MasterControl/MasterControl.cpp(2832):Generated devPwd: 29757909 ../../common/WscCmd/WscCmd.cpp(1808):WscCmd::AP tmp file =cp /etc/template.conf ../../common/WscCmd/WscCmd.cpp(1814):WscCmd::AP Config file copied: cmd=cp /etc/template.conf /etc/hostapd.conf ../../common/WscCmd/WscCmd.cpp(2002):WscCmd::Params added to AP config file ni->ni_vap->iv_opmode = 6 ni->ni_vap->iv_opmode = 6 ar9287EepromSetPowerPerRateTable: Reg power: 20 dBm Net ant gain allowed: 0 dB ar9287EepromSetPowerPerRateTable: Power Limit (Reg power - Net ant gain): 19 dBm ar9287EepromSetPowerPerRateTable: Number of chains: 2 Per chain power limit: 16 dBm ar9287EepromSetPowerPerRateTable: Target powers: 1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm ar9287EepromSetPowerPerRateTable: syn 2457 ctl 2457 ext 2457 is40 0 ar9287EepromSetPowerPerRateTable: Ctl mode: 1 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 2 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 5 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Chosen powers:1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm 2xMaxPowerLevel: 37 (LEG) JXU: set the rxBufsize to 3851 ath_newstate: Resetting VAP dfswait_run ath_newstate: Resetting VAP dfswait_run ar9287EepromSetPowerPerRateTable: Reg power: 20 dBm Net ant gain allowed: 0 dB ar9287EepromSetPowerPerRateTable: Power Limit (Reg power - Net ant gain): 19 dBm ar9287EepromSetPowerPerRateTable: Number of chains: 2 Per chain power limit: 16 dBm ar9287EepromSetPowerPerRateTable: Target powers: 1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm ar9287EepromSetPowerPerRateTable: syn 2457 ctl 2457 ext 2457 is40 0 ar9287EepromSetPowerPerRateTable: Ctl mode: 1 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 2 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 5 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Chosen powers:1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm 2xMaxPowerLevel: 37 (LEG) ath_chan_set: Changing to channel 2457, Flags 30080, PF 0 JXU: set the rxBufsize to 3851 key_alloc_2pair: sc_splitmic SET to 1 ../../common/InbWlan/InbWlan.cpp(244):UDP recv m_recvPort[0]= 1026 key_alloc_2pair: sc_splitmic SET to 1 __BEI:sg_switch_free_switch_config called__ ------>dev_if_notify : <eth0> [4 -> 1] ------>dev_if_notify : <eth0.35> [1 -> 1] ------>dev_if_notify : <eth0.838> [1 -> 1] ------>dev_if_notify : <eth0.839> [1 -> 1] Username: ../../common/UPnPDevLib/UPnPMicroStack.c(2689):HTTP receive GET ../../common/UPnPDevLib/UPnPMicroStack.c(2696):HTTP receive / ../../common/UPnPDevLib/UPnPMicroStack.c(2689):HTTP receive GET ../../common/UPnPDevLib/UPnPMicroStack.c(2696):HTTP receive / ../../common/UPnPDevLib/UPnPMicroStack.c(2689):HTTP receive GET ../../common/UPnPDevLib/UPnPMicroStack.c(2696):HTTP receive / ../../common/UPnPDevLib/UPnPMicroStack.c(2689):HTTP receive GET ../../common/UPnPDevLib/UPnPMicroStack.c(2696):HTTP receive / xdsl autodetect mode non actif CPE start address is a7800000 ipos system initialized BME 1 is coming up msg[0]=0x22 received from mcu (Power Monitoring Failure as the Wake Up Source) Transfer to SDRAM Successful BmeHw: Downloading BME 1 software .....! BmeHw: Bme 1 software code downloaded successfully The feature bit has been successfully modified for eth0 eth1 PERI VDSL APs... ******sysutil apfeature all vlanbridge enable****** alm freq 20 status freq 30 /tmp/dslSavedConfig.conf file not found configuration file /etc/vdsl.conf:start______ configuration file /etc/vdsl.conf:start0______ OamOptionMask Set to 3 _____________________BEI:fpvdslconfigfile == NULL__________________ taskUi: profileNum = 2 Sizeof ipos_port_profile=144 Please execute 'vdsl' in 15 seconds to enter into Supervisor mode 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 Changing port profile #2 BAND_PLAN=0x1 PTM MODE=0x0 OamoptionMask 3 optionMask 8ath_tx_reset Started tx reset ath_tx_reset Completed tx reset ath_bstuck_tasklet: stuck beacon; resetting (bmiss count 36) ar9287EepromSetPowerPerRateTable: Reg power: 20 dBm Net ant gain allowed: 0 dB ar9287EepromSetPowerPerRateTable: Power Limit (Reg power - Net ant gain): 19 dBm ar9287EepromSetPowerPerRateTable: Number of chains: 2 Per chain power limit: 16 dBm ar9287EepromSetPowerPerRateTable: Target powers: 1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm ar9287EepromSetPowerPerRateTable: syn 2457 ctl 2457 ext 2457 is40 0 ar9287EepromSetPowerPerRateTable: Ctl mode: 1 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 2 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Ctl mode: 5 Per chain minimum CTL power: 15 dBm ar9287EepromSetPowerPerRateTable: Chosen powers:1Mb/s: 15 dBm 11Mb/s: 15 dBm 6Mb/s: 15 dBm 54Mb/s: 12 dBm MCS0(HT20): 15 dBm MCS7(HT20): 10 dBm MCS0(HT40): 0 dBm MCS7(HT40): 0 dBm 2xMaxPowerLevel: 37 (LEG) JXU: set the rxBufsize to 3851 |