TP-LINK Archer A9 v6.x

From WikiDevi.Wi-Cat.RU
Jump to navigation Jump to search

TP-LINK Archer A9 v6.x (US)

FCC approval date: 30 November 2018
(Est.) release date: 21 March 2019
(Est.) initial retail price (in USD): $90
Country of manuf.: China
Series: AC1900

Amazon image

ASIN
B07NF3K74H (Flag of the United States.svg, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: wireless router

FCC ID: TE7A9V6
IC ID: 8853A-A9V6
PCB ID: 2050501217

Power: 12 VDC, 1.5 A
Connector type: barrel

CPU1: Qualcomm QCN5502 (775 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (GigaDevice GD25Q127CSIG)
RAM1: 128 MiB134,217,728 B <br />1,048,576 Kib <br />131,072 KiB <br />1,024 Mib <br />0.125 GiB <br /> (ESMT M14D1G1664A-2.5B)

Expansion IFs: USB 2.0
USB ports: 1
Serial: yes, 4-pin header

WI1 chip1: Qualcomm QCN5502
WI1 802dot11 protocols: bgn
WI1 MIMO config: 4x4:3
WI1 antenna connector: U.FL
WI2 chip1: Qualcomm Atheros QCA9984
WI2 802dot11 protocols: an+ac
WI2 MIMO config: 4x4:3
WI2 antenna connector: U.FL

ETH chip1: Qualcomm QCN5502
Switch: Qualcomm Atheros QCA8337N
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1

abgn+ac

Additional chips
5GHz WLAN RF FEM;Microsemi;LX5589H;;4;

Stock bootloader: U-Boot 1.1.4

Stock FW OS: Linux 3.3.8

Flags: Wave2, MU-MIMO, 256QAM

Default SSID: TP-Link_XXXX (34 addl. devices)
, TP-Link_XXXX_5G (23 addl. devices)
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1239 additional devices
of which 108 are TP-LINK devices
Default login user: blank
Default login password: admin
blank:admin credentials used by 286 additional devices
of which 0 are TP-LINK devices

802dot11 OUI: 68:FF:7B
Ethernet OUI: 68:FF:7B

 CPU1 brandWI1 chip1 brandWI2 chip1 brand
TP-LINK Archer A9 v5.xBroadcomBroadcomBroadcom
TP-LINK Archer A9 v6.xQualcommQualcommQualcomm Atheros

For a list of all currently documented Qualcomm chipsets with specifications, see Qualcomm.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.


1300 Mbps - 3SS 5GHz 802.11ac (80MHz chan.),
600 Mbps - 3SS 2.4GHz 802.11n (40MHz chan., 256QAM) = 1900 Mbps class

AC1900 Wireless MU-MIMO Gigabit Router

Product page  • Support page (US) • Datasheet

"2050501217" is silkscreened on the board in the FCC photos.

Not much information has been made public about the QCN5502

Qualcomm QCN5502 4T4R 802.11bgn WiSoC (180-DRQFN)

Specifications

802.11n 4T4R:3SS (600Mbps, 2.4GHz)
802.11ac 4T4R:3SS (1300Mbps, 5GHz)
  • USB: 1x USB 2.0 ports

Reviews

Serial

Boot log

boot log
U-Boot 1.1.4-g859dd656-dirty (Sep 20 2018 - 22:02:50)

apjet01 - Dragonfly 1.0

DRAM:  128 MB
Flash Manuf Id 0xc8, DeviceId0 0x40, DeviceId1 0x18
flash size 16MB, sector count = 256
Flash: 16 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Setting 0x181162c0 to 0x4b962100
extra-para:01 01

[393]factory boot check integer ok.

factory boot load fs uboot len 131072 to addr 0x80010000.
press CTRL+C to stop factory u-boot autoboot:  0
## Starting application at 0x80010000 ...

U-Boot 1.1.4-g859dd656-dirty (Sep 20 2018 - 22:02:34)

apjet01 - Dragonfly 1.0

DRAM:  128 MB
Flash Manuf Id 0xc8, DeviceId0 0x40, DeviceId1 0x18
flash size 16MB, sector count = 256
Flash: 16 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net mini: ath_gmac_enet_initialize...
Fetching MAC Address from 0x87ff3e3c
ath_gmac_enet_initialize: reset mask:c02200
athr_mgmt_init ::done
JET  ----> S17 PHY *
athrs17_reg_init: complete
SGMII in forced mode
athr_gmac_sgmii_setup SGMII done
: cfg1 0x80000000 cfg2 0x7114
eth0: 00:00:2e:27:00:00
Setting 0x181162c0 to 0x4b962100
press ENTER to stop autoboot:  0
## Booting image at 9f0c0000 ...
   Image Name:   MIPS OpenWrt Linux-3.3.8
   Created:      2019-01-08   9:07:29 UTC
   Image Type:   MIPS Linux Multi-File Image (lzma compressed)
   Data Size:    1092324 Bytes =  1 MB
   Load Address: 80060000
   Entry Point:  80060000
   Contents:
   Image 0:  1092316 Bytes =  1 MB
   Verifying Checksum at 0x9f0c0040 ...OK
   Uncompressing Multi-File Image ... OK

Starting kernel ...

[    0.000000] Linux version 3.3.8 (leo@leo-MS-7529) (gcc version 4.6.3 20120201 (prerelease) (Linaro GCC 4.6-2012.02) ) #3 Fri Sep 21 18:40:40 HKT 2018
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 00019750 (MIPS 74Kc)
[    0.000000] SoC: Qualcomm Atheros QCA5502 rev 0
[    0.000000] Clocks: CPU:775.000MHz, DDR:650.000MHz, AHB:258.333MHz, Ref:25.000MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] User-defined physical RAM map:
[    0.000000]  memory: 08000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone PFN ranges:
[    0.000000]   Normal   0x00000000 -> 0x00008000
[    0.000000] Movable zone start PFN for each node
[    0.000000] Early memory PFN ranges
[    0.000000]     0: 0x00000000 -> 0x00008000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 32512
[    0.000000] Kernel command line:  console=ttyS0,115200 board=APJET01 rootfstype=squashfs init=/etc/preinit mtdparts=spi0.0:128k(factory-uboot),192k(u-boot),64k(ART),1536k(uImage),14464k@0x1e0000(rootfs) mem=128M rootfstype=squashfs,jffs2 noinitrd crashkernel=10M@20M oops=panic
[    0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[    0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[    0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
[    0.000000] Writing ErrCtl register=00000000
[    0.000000] Readback ErrCtl register=00000000
[    0.000000] Memory: 126204k/131072k available (2334k kernel code, 4868k reserved, 591k data, 180k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:83
[    0.000000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
[    0.060000] pid_max: default: 32768 minimum: 301
[    0.060000] Mount-cache hash table entries: 512
[    0.070000] NET: Registered protocol family 16
[    0.070000] gpiochip_add: registered GPIOs 0 to 20 on device: ath79
[    0.080000] MIPS: machine is TP-LINK Archer a9 v6 support
[    0.080000]
[    0.080000] WLAN firmware dump buffer allocation of 2097152 bytes @ address 0x87a00000- SUCCESS !!!
[    0.090000] registering PCI controller with io_map_base unset
[    0.300000] bio: create slab <bio-0> at 0
[    0.300000] PCI host bridge to bus 0000:00
[    0.300000] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff]
[    0.310000] pci_bus 0000:00: root bus resource [io  0x0001]
[    0.310000] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit]
[    0.320000] pci 0000:00:00.0: using irq 40 for pin 1
[    0.320000] Switching to clocksource MIPS
[    0.330000] NET: Registered protocol family 2
[    0.330000] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.330000] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.340000] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.340000] TCP: Hash tables configured (established 4096 bind 4096)
[    0.350000] TCP reno registered
[    0.350000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.360000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.360000] NET: Registered protocol family 1
[    0.380000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.380000] msgmni has been set to 246
[    0.390000] io scheduler noop registered
[    0.390000] io scheduler deadline registered (default)
[    0.400000] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
[    0.420000] serial8250.0: ttyS0 at MMIO 0x18020000 (irq = 11) is a 16550A
[    0.430000] console [ttyS0] enabled, bootconsole disabled
[    0.430000] console [ttyS0] enabled, bootconsole disabled
[    0.440000] m25p80 spi0.0: found gd25q128, expected m25p80
[    0.450000] m25p80 spi0.0: gd25q128 (16384 Kbytes)
[    0.450000] 5 cmdlinepart partitions found on MTD device spi0.0
[    0.460000] Creating 5 MTD partitions on "spi0.0":
[    0.460000] 0x000000000000-0x000000020000 : "factory-uboot"
[    0.470000] 0x000000020000-0x000000050000 : "u-boot"
[    0.480000] 0x000000050000-0x000000060000 : "ART"
[    0.480000] 0x000000060000-0x0000001e0000 : "uImage"
[    0.490000] 0x0000001e0000-0x000001000000 : "rootfs"
[    0.500000] mtd: partition "rootfs" set to be root filesystem
[    0.500000] m25p80 spi0.1: found pm25lv512, expected m25p80
[    0.510000] m25p80 spi0.1: pm25lv512 (64 Kbytes)
[    0.510000] flash_chrdev : flash_chrdev_init
[    0.660000] ag71xx_mdio: probed
[    0.660000] eth0: Atheros AG71xx at 0xb9000000, irq 4
[    1.240000] eth0: Atheros AR8327 switch driver attached.
[    3.660000] eth0: Atheros AR8327 switch phy power down.
[    3.670000] ag71xx ag71xx.0: eth0: connected to PHY at ag71xx-mdio.0:00 [uid=004dd036, driver=Atheros AR8216/AR8236/AR8316]
[    3.680000] TCP cubic registered
[    3.680000] NET: Registered protocol family 17
[    3.690000] Bridge firewalling registered
[    3.690000] 8021q: 802.1Q VLAN Support v1.8
[    3.700000] ### of_selftest(): No testcase data in device tree; not running tests
[    3.710000] VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
[    3.720000] Freeing unused kernel memory: 180k freed
- preinit -
- regular preinit -
jffs2 not ready yet; using ramdisk
Support to copy caldata is not there for unknown
- init -
[    6.730000] liblog: module license 'unspecified' taints kernel.
[    6.730000] Disabling lock debugging due to kernel taint
[    7.000000] NET: Registered protocol family 10
[    7.160000] SCSI subsystem initialized
[    7.260000] usbcore: registered new interface driver usbfs
[    7.270000] usbcore: registered new interface driver hub
[    7.280000] usbcore: registered new device driver usb
[    7.430000] PPP generic driver version 2.4.2
[    7.470000] tun: Universal TUN/TAP device driver, 1.6
[    7.480000] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    7.520000] PPP MPPE Compression module registered
[    7.560000] NET: Registered protocol family 24
[    7.630000] L2TP core driver, V2.0
[    7.640000] L2TP netlink interface
[    7.690000] IPv6 over IPv4 tunneling driver
[    7.720000] GRE over IPv4 demultiplexor driver
[    7.760000] GRE over IPv4 tunneling driver
[    7.830000] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    7.910000] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.150000] nf_conntrack version 0.5.0 (1974 buckets, 7896 max)
[    8.340000] PPPoL2TP kernel driver, V2.0
[    8.360000] PPTP driver version 0.8.5
[    8.750000] xt_time: kernel timezone is -0000
[    9.260000] nf_conntrack_rtsp v0.6.21 loading
[    9.290000] nf_nat_rtsp v0.6.21 loading
[    9.350000] Netfilter messages via NETLINK v0.30.
[    9.380000] ctnetlink v0.93: registering with nfnetlink.
[    9.660000] ssdk_plat_init start
[    9.660000] Register QCA PHY driver
[    9.780000] qca-ssdk module init succeeded!
[    9.800000] AR71XX_RESET_REG_WDOG_CTRL: 0x0
[    9.800000]
[    9.860000] Initializing USB Mass Storage driver...
[    9.870000] usbcore: registered new interface driver usb-storage
[    9.870000] USB Mass Storage support registered.
[    9.970000] fuse init (API version 7.18)
reload_profile() begin
reload_profile() end
reloadconfig() begin
user-config size is OK, size = 11538
1.untar result is : 0
................................start of merge user and default........................
................................parse userconf to get mode.............................
................................end of parse userconf..................................
................................mode : ap...............................
................................end of merge user and default..........................
................................new configs merged.....................................
reloadconfig() end
########merge_mfconfig() start########
########merge_mfconfig() end########

Images