TP-LINK TL-R402M v4.0
TP-LINK TL-R402M v4.0
Availability: common
Type: router
Power: 9 VDC, 0.8 A
Connector type: barrel
CPU1: Marvell 88E6218 (150 MHz)
FLA1: 512 KiB 0.5 MiB <br />524,288 B <br />4,096 Kib <br />4 Mib <br />4.882812e-4 GiB <br /> (Spansion S29AL004D70TFI02)
RAM1: 2 MiB 2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (ISSI IS42S16100C1-7TL)
Expansion IFs: none specified
ETH chip1: Marvell 88E6218
Switch: Marvell 88E6218
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
Default IP address: 192.168.1.1
the IP 192.168.1.1 is used by 1304 additional devices
of which 109 are TP-LINK devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1324 additional devices
of which 277 are TP-LINK devices
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
The above link is dead, but I found some more technical analysis at a review from 2006.
From here, the following information can be confirmed:
- CPU: Marvell 88E6218 @150MHz
- Flash: Spansion 4 Mbit (512K x 8-Bit / 256 K x 16-Bit)
- CMOS 3.0 V with boot sector, using 48-pin TSOP
- RAM: ISSI IC42S16100 (SDRAM) 512K x 16 Bit x 2 Banks (16-MBit) TSOP II
Also note that the size of a firmware upgrade is usually just below 512KiB.
However, according to that page, the very similar TL-R460 does have
- 1MB 29LV800B flash and 8MB RAM Samsung K4S641632H-TC75.
See also TP-LINK TL-R450 v4.0..
