WatchGuard Firebox T35-W (MS3AE5W)

WatchGuard Firebox T35 -W (MS3AE5W)

Manuf (OEM/ODM): Senao

FCC approval date: 01 September 2017
Country of manuf.: Taiwan

Type: wireless router, security appliance

FCC ID: Q6G-MS3AE5W
IC ID: 4657A-MS3AE5W
PCB ID: 7016A0856034

Power: 54 VDC, 1.2 A
PoE tag: 802.3at, standard

CPU1: Freescale (NXP) T1024 (1.2 GHz, 2 cores)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Winbond Model?)
FLA2: 16 GiB 16,384 MiB <br />17,179,869,184 B <br />134,217,728 Kib <br />16,777,216 KiB <br />131,072 Mib <br /> (Toshiba TC58TEG6 × 2)
RAM1: 2 GiB 2,048 MiB <br />2,147,483,648 B <br />16,777,216 Kib <br />2,097,152 KiB <br />16,384 Mib <br /> (Nanya Model? × 4)

Expansion IFs: Mini PCIe, USB 2.0, mSATA
Mini PCIe slots: 1
USB ports: 2
SATA ports: 1

WI1 module: Senao PCE4553AH
WI1 module IF: Mini PCIe
WI1 chip1: Qualcomm Atheros QCA9880
WI1 802dot11 protocols: abgn+ac
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL

ETH chip1: Freescale (NXP) T1024
Switch: Marvell 88E6176
LAN speed: 1GbE
LAN ports: 4
WAN speed: 1GbE
WAN ports: 1

abgn+ac

Additional chips
2.4/5GHz WLAN FEM;Skyworks;SE5516;SE5516, 3907205.1, 1710 MX;3;
NVMe DRAMless SSD Controller (PCIe 3.0/SATA);Marvell;88NV1120;;1;

Flags: battery backup

Default IP address: 10.0.1.1
the IP 10.0.1.1 is used by 12 additional devices
of which 10 are WatchGuard devices
Default login user: admin
Default login password: readwrite
admin:readwrite credentials used by 13 additional devices
of which 13 are WatchGuard devices

802dot11 OUI: none specified

For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Qualcomm Atheros (QCA) chipsets with specifications, see Qualcomm Atheros.

---

"7016A0856034 V1.30" is silkscreened on the board of the card.

See also: WatchGuard Firebox T55-W (MS5AE5W) and Senao

• Watchguard T35 on rovi.dk blog

• CPU: Freescale (NXP) QorIQ T1024NS (@1.4GHz Dual Core)

Flash Module: 16GB mSATA (2x Toshiba TC58TEG6)

Innodisk DEMSR-16GM41BC1DC-D59

• Web GUI: 10.0.1.1:8080/

• Boot log

SPI boot… Not enough bank(chip-select) for CS0+CS1 on controller 0, interleaving disabled! Loading second stage boot loader ……………………………………………………………………………………. U-Boot 2015.01 (Jul 18 2017 – 15:03:34) CPU0: T1024E, Version: 1.0, (0x85480010) Core: e5500, Version: 2.1, (0x80241021) Single Source Clock Configuration Clock Configuration: CPU0:1200 MHz, CPU1:1200 MHz, CCB:400 MHz, DDR:800 MHz (1600 MT/s data rate) (Asynchronous), IFC:100 MHz QE:200 MHz FMAN1: 600 MHz QMAN: 400 MHz L1: D-cache 32 KiB enabled I-cache 32 KiB enabled Reset Configuration Word (RCW): 00000000: 0810000c 00000000 00000000 00000000 00000010: 2d000003 0000001a 5c027000 21000000 00000020: 00000000 00000000 00000000 00033f00 00000030: 00000704 49260a08 00000000 00000006 Board: T1024RDB, Board rev: 0xff CPLD ver: 0xff, boot from SPI SERDES Reference Clocks: SD1_CLK1=100.00MHZ, SD1_CLK2=125.00MHz I2C: ready SPI: ready DRAM: Detected UDIMM Fixed DDR4 on board Not enough bank(chip-select) for CS0+CS1 on controller 0, interleaving disabled! 2 GiB (DDR3, 64-bit, CL=12, ECC off) Flash: 0 Bytes L2: 256 KiB enabled Corenet Platform Cache: 256 KiB enabled Using SERDES1 Protocol: 90 (0x5a) NAND: 0 MiB MMC: FSL_SDHC: 0 SF: Detected W25Q32BV with page size 256 Bytes, erase size 4 KiB, total 4 MiB EEPROM: Read failed. PCIe1: Root Complex, no link, regs @ 0xfe240000 PCIe1: Bus 00 – 00 PCIe2: disabled PCIe3: Root Complex, no link, regs @ 0xfe260000 PCIe3: Bus 01 – 01 In: serial Out: serial Err: serial Net: SerDes protocol 0x5a is not supported on T102xRDB SF: Detected W25Q32BV with page size 256 Bytes, erase size 4 KiB, total 4 MiB Fman1: Uploading microcode version 108.4.5 Phy 0 not found PHY reset timed out PHY reset timed out FM_TGEC_MDIO:0 is connected to FM1@DTSEC1. Reconnecting to FM1@DTSEC2 Phy 0 not found PHY reset timed out Phy 2 not found PHY reset timed out FM1@DTSEC1, FM1@DTSEC2, FM1@DTSEC3, FM1@DTSEC4 [PRIME] �[2J�[2;16HWatchGuard U-Boot 2015.01 – Jul 18 2017 15:03:34�[4;2H-�[4;3H-�[4;4H-�[4;5H-�[4;6H-�[4;7H-�[4;8H-�[4;9H-�[4;10H-�[4;11H-�[4;12H-�[4;13H-�[4;14H-�[4;15H-�[4;16H-�[4;17H-�[4;18H-�[4;19H-�[4;20H-�[4;21H-�[4;22H-�[4;23H-�[4;24H-�[4;25H-�[4;26H-�[4;27H-�[4;28H-�[4;29H-�[4;30H-�[4;31H-�[4;32H-�[4;33H-�[4;34H-�[4;35H-�[4;36H-�[4;37H-�[4;38H-�[4;39H-�[4;40H-�[4;41H-�[4;42H-�[4;43H-�[4;44H-�[4;45H-�[4;46H-�[4;47H-�[4;48H-�[4;49H-�[4;50H-�[4;51H-�[4;52H-�[4;53H-�[4;54H-�[4;55H-�[4;56H-�[4;57H-�[4;58H-�[4;59H-�[4;60H-�[4;61H-�[4;62H-�[4;63H-�[4;64H-�[4;65H-�[4;66H-�[4;67H-�[4;68H-�[4;69H-�[4;70H-�[4;71H-�[4;72H-�[4;73H-�[4;74H-�[4;75H-�[4;2H|�[5;2H|�[6;2H|�[7;2H|�[8;2H|�[9;2H|�[10;2H|�[11;2H|�[12;2H|�[13;2H|�[14;2H|�[15;2H|�[4;76H|�[5;76H|�[6;76H|�[7;76H|�[8;76H|�[9;76H|�[10;76H|�[11;76H|�[12;76H|�[13;76H|�[14;76H|�[15;76H|�[16;3H-�[16;4H-�[16;5H-�[16;6H-�[16;7H-�[16;8H-�[16;9H-�[16;10H-�[16;11H-�[16;12H-�[16;13H-�[16;14H-�[16;15H-�[16;16H-�[16;17H-�[16;18H-�[16;19H-�[16;20H-�[16;21H-�[16;22H-�[16;23H-�[16;24H-�[16;25H-�[16;26H-�[16;27H-�[16;28H-�[16;29H-�[16;30H-�[16;31H-�[16;32H-�[16;33H-�[16;34H-�[16;35H-�[16;36H-�[16;37H-�[16;38H-�[16;39H-�[16;40H-�[16;41H-�[16;42H-�[16;43H-�[16;44H-�[16;45H-�[16;46H-�[16;47H-�[16;48H-�[16;49H-�[16;50H-�[16;51H-�[16;52H-�[16;53H-�[16;54H-�[16;55H-�[16;56H-�[16;57H-�[16;58H-�[16;59H-�[16;60H-�[16;61H-�[16;62H-�[16;63H-�[16;64H-�[16;65H-�[16;66H-�[16;67H-�[16;68H-�[16;69H-�[16;70H-�[16;71H-�[16;72H-�[16;73H-�[16;74H-�[16;75H-�[4;2H+�[4;76H+�[16;2H+�[16;76H+�[18;7HUse the ^ and v keys to select which entry is highlighted.�[19;7HPress enter to boot the selected OS.�[26;1H�[5;3H�[7mWatchGuard (SYSA) �[m�[26;1H�[6;3HWatchGuard (SYSB Recovery/Diagnostic Mode) �[26;1H�[7;3HWatchGuard (SYSA from /boot) �[26;1HHit any key to stop autoboot: 3 ��� 2 ��� 1 ��� 0 �[2KBooting SYSA SATA0 (3 Gbps) 28608 bytes read in 55 ms (507.8 KiB/s) 5447583 bytes read in 117 ms (44.4 MiB/s) WARNING: adjusting available memory to 30000000 ## Booting kernel from Legacy Image at 01000000 … Image Name: Linux-3.12.19-rt30 Created: 2017-11-16 18:41:48 UTC Image Type: PowerPC Linux Kernel Image (gzip compressed) Data Size: 5447519 Bytes = 5.2 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum … OK ## Flattened Device Tree blob at 02000000 Booting using the fdt blob at 0x2000000 Uncompressing Kernel Image … OK Loading Device Tree to 03fe5000, end 03ffefbf … OK [ 0.000000] Reserving 24MB of memory at 232MB for crashkernel (System RAM: 2048MB) [ 0.000000] Using CoreNet Generic machine description [ 0.000000] MMU: Supported page sizes [ 0.000000] 4 KB as direct [ 0.000000] 1024 KB as direct [ 0.000000] 2048 KB as direct [ 0.000000] 4096 KB as direct [ 0.000000] 16384 KB as direct [ 0.000000] 65536 KB as direct [ 0.000000] 262144 KB as direct [ 0.000000] 1048576 KB as direct [ 0.000000] MMU: Book3E HW tablewalk not supported [ 0.000000] No /soc@ffe000000/qman@318000 property ‘fsl,qman-fqd’, using memblock_alloc(0000000000400000) [ 0.000000] No /soc@ffe000000/qman@318000 property ‘fsl,qman-pfdr’, using memblock_alloc(0000000002000000) [ 0.000000] Qman ver:0a01,03,01,03 [ 0.000000] No /soc@ffe000000/bman@31a000 property ‘fsl,bman-fbpr’, using memblock_alloc(0000000001000000) [ 0.000000] Bman ver:0a02,02,01 [ 0.000000] No USDPAA memory, no ‘usdpaa_mem’ bootarg [ 0.000000] bootconsole [udbg0] enabled [ 0.000000] CPU maps initialized for 1 thread per core [ 0.000000] Starting Linux PPC64 #1 SMP Thu Nov 16 10:41:37 PST 2017 [ 0.000000] —————————————————– [ 0.000000] ppc64_pft_size = 0x0 [ 0.000000] physicalMemorySize = 0x80000000 [ 0.000000] ppc64_caches.dcache_line_size = 0x40 [ 0.000000] ppc64_caches.icache_line_size = 0x40 [ 0.000000] —————————————————– <- setup_system() [ 0.000000] Linux version 3.12.19-rt30 (release@cm13se) (gcc version 4.8.3 (crosstool-NG 1.20.0) ) #1 SMP Thu Nov 16 10:41:37 PST 2017 CF000012 Setup Arch [ 0.000000] [boot]0012 Setup Arch [ 0.000000] CoreNet Generic board from Freescale Semiconductor [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00000000-0x7fffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00000000-0x7fffffff] [ 0.000000] MMU: Allocated 2112 bytes of context maps for 255 contexts CF000015 Setup Done [ 0.000000] [boot]0015 Setup Done [ 0.000000] PERCPU: Embedded 12 pages/cpu @c000000002c00000 s18432 r0 d30720 u524288 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517120 [ 0.000000] Kernel command line: root=/dev/sda3 rw rootdelay=2 console=ttyS0,115200 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Sorting __ex_table… [ 0.000000] Memory: 1904920K/2097152K available (8432K kernel code, 1300K rwdata, 3124K rodata, 432K init, 2056K bss, 192232K reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU debugfs-based tracing is enabled. [ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32 [ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. [ 0.000000] NR_IRQS:512 nr_irqs:512 16 [ 0.000000] mpic: Setting up MPIC ” OpenPIC ” version 1.2 at ffe040000, max 2 CPUs [ 0.000000] mpic: ISU size: 512, shift: 9, mask: 1ff [ 0.000000] mpic: Initializing for 512 sources [ 0.000000] clocksource: timebase mult[28000000] shift[24] registered [ 0.000000] Console: colour dummy device 80×25 [ 0.000000] WG CPU Model 1024 Count 2 [ 0.000000] WG CRASH MIN RESERVE 24 MB [ 0.000000] [ 0.000000] wg_kernel_init: Built Nov 16 2017 10:40:47 [ 0.025295] pid_max: default: 32768 minimum: 301 [ 0.029948] Mount-cache hash table entries: 256 [ 0.037446] mpic: requesting IPIs… [ 0.041413] e500 family performance monitor hardware support registered [ 0.049002] Brought up 2 CPUs [ 0.053122] xor: measuring software checksum speed [ 0.097897] 8regs : 2712.000 MB/sec [ 0.142035] 8regs_prefetch: 2219.000 MB/sec [ 0.186520] 32regs : 2614.000 MB/sec [ 0.230657] 32regs_prefetch: 2332.000 MB/sec [ 0.235202] xor: using function: 8regs (2712.000 MB/sec) [ 0.240707] NET: Registered protocol family 16 [ 0.262985] Found FSL PCI host bridge at 0x0000000ffe240000. Firmware bus number: 0->0 [ 0.270868] PCI host bridge /pcie@ffe240000 ranges: [ 0.275823] MEM 0x0000000c00000000..0x0000000c0fffffff -> 0x00000000e0000000 [ 0.283059] IO 0x0000000ff8000000..0x0000000ff800ffff -> 0x0000000000000000 [ 0.290221] /pcie@ffe240000: PCICSRBAR @ 0xff000000 [ 0.295265] EDAC PCI0: Giving out device to module ‘MPC85xx_edac’ controller ‘mpc85xx_pci_err’: DEV ‘ffe240000.pcie’ (INTERRUPT) [ 0.306844] MPC85xx_edac acquired irq 20 for PCI Err [ 0.311762] MPC85xx_edac PCI err registered [ 0.316353] Found FSL PCI host bridge at 0x0000000ffe260000. Firmware bus number: 0->0 [ 0.324228] PCI host bridge /pcie@ffe260000 ranges: [ 0.329188] MEM 0x0000000c20000000..0x0000000c2fffffff -> 0x00000000e0000000 [ 0.336425] IO 0x0000000ff8020000..0x0000000ff802ffff -> 0x0000000000000000 [ 0.343585] /pcie@ffe260000: PCICSRBAR @ 0xff000000 [ 0.348503] EDAC PCI1: Giving out device to module ‘MPC85xx_edac’ controller ‘mpc85xx_pci_err’: DEV ‘ffe260000.pcie’ (INTERRUPT) [ 0.360093] MPC85xx_edac acquired irq 22 for PCI Err [ 0.365027] MPC85xx_edac PCI err registered [ 0.384602] PCI: Probing PCI hardware [ 0.388526] fsl-pci ffe240000.pcie: PCI host bridge to bus 0000:00 [ 0.394671] pci_bus 0000:00: root bus resource [io 0x10000-0x1ffff] (bus address [0x0000-0xffff]) [ 0.403641] pci_bus 0000:00: root bus resource [mem 0xc00000000-0xc0fffffff] (bus address [0xe0000000-0xefffffff]) [ 0.414019] pci_bus 0000:00: root bus resource [bus 00] [ 0.419290] pci 0000:00:00.0: ignoring class 0x0b2000 (doesn’t match header type 01) [ 0.427346] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.435458] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 0.440861] fsl-pci ffe260000.pcie: PCI host bridge to bus 0001:00 [ 0.446997] pci_bus 0001:00: root bus resource [io 0x21000-0x30fff] (bus address [0x0000-0xffff]) [ 0.455975] pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc2fffffff] (bus address [0xe0000000-0xefffffff]) [ 0.466347] pci_bus 0001:00: root bus resource [bus 00] [ 0.471618] pci 0001:00:00.0: ignoring class 0x0b2000 (doesn’t match header type 01) [ 0.479621] pci 0001:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [ 0.487727] pci 0001:00:00.0: PCI bridge to [bus 01-ff] [ 0.493030] pci 0000:00:00.0: PCI bridge to [bus 01] [ 0.497933] pci 0000:00:00.0: bridge window [io 0x10000-0x1ffff] [ 0.504206] pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc0fffffff] [ 0.511214] pci 0001:00:00.0: PCI bridge to [bus 01] [ 0.516152] pci 0001:00:00.0: bridge window [io 0x21000-0x30fff] [ 0.522430] pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc2fffffff] [ 0.541208] bio: create slab <bio-0> at 0 [ 0.613279] raid6: int64x1 451 MB/s [ 0.681301] raid6: int64x2 735 MB/s [ 0.749396] raid6: int64x4 1007 MB/s [ 0.817487] raid6: int64x8 828 MB/s [ 0.821155] raid6: using algorithm int64x4 (1007 MB/s) [ 0.826305] raid6: using intx1 recovery algorithm [ 0.831323] Freescale Elo series DMA driver [ 0.835774] fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28 [ 0.842870] fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29 [ 0.849924] fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30 [ 0.856984] fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31 [ 0.864002] fsl-elo-dma ffe100300.dma: #4 (fsl,eloplus-dma-channel), irq 76 [ 0.870951] fsl-elo-dma ffe100300.dma: #5 (fsl,eloplus-dma-channel), irq 77 [ 0.877971] fsl-elo-dma ffe100300.dma: #6 (fsl,eloplus-dma-channel), irq 78 [ 0.884924] fsl-elo-dma ffe100300.dma: #7 (fsl,eloplus-dma-channel), irq 79 [ 0.892901] fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32 [ 0.899877] fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33 [ 0.906838] fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34 [ 0.913858] fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35 [ 0.920813] fsl-elo-dma ffe101300.dma: #4 (fsl,eloplus-dma-channel), irq 80 [ 0.927789] fsl-elo-dma ffe101300.dma: #5 (fsl,eloplus-dma-channel), irq 81 [ 0.934756] fsl-elo-dma ffe101300.dma: #6 (fsl,eloplus-dma-channel), irq 82 [ 0.941723] fsl-elo-dma ffe101300.dma: #7 (fsl,eloplus-dma-channel), irq 83 [ 0.949771] misc_register: 10, 63 vga_arbiter [ 0.954268] vgaarb: loaded [ 0.957228] SCSI subsystem initialized [ 0.961678] usbcore: registered new interface driver usbfs [ 0.967201] usbcore: registered new interface driver hub [ 0.972566] usbcore: registered new device driver usb [ 0.977846] pps_core: LinuxPPS API ver. 1 registered [ 0.982755] pps_core: Software ver. 5.3.6 – Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> [ 0.991975] PTP clock support registered [ 0.995989] EDAC MC: Ver: 3.0.0 [ 0.999706] Bman err interrupt handler present [ 1.004600] Bman portal initialised, cpu 0 [ 1.008823] Bman portal initialised, cpu 1 [ 1.012852] Bman portals initialised [ 1.017264] Qman err interrupt handler present [ 1.021923] QMan: Allocated lookup table at 8000000000000000, entry count 65537 [ 1.029949] Qman portal initialised, cpu 0 [ 1.034159] Qman portal initialised, cpu 1 [ 1.038192] Qman portals initialised [ 1.041766] Qman reset info for 8 portals at c00000007b406300 [ 1.047662] Bman: BPID allocator includes range 32:32 [ 1.052718] Qman: FQID allocator includes range 256:512 [ 1.057878] Qman: FQID allocator includes range 32768:32768 [ 1.063520] Qman: CGRID allocator includes range 0:256 [ 1.068767] Qman: pool channel allocator includes range 1025:15 [ 1.075452] Switched to clocksource timebase [ 1.085480] FS-Cache: Loaded [ 1.088381] misc_register: 10, 62 cachefiles [ 1.092913] CacheFiles: Loaded [ 1.102736] NET: Registered protocol family 2 [ 1.107516] TCP established hash table entries: 16384 (order: 6, 262144 bytes) [ 1.114910] TCP bind hash table entries: 16384 (order: 6, 262144 bytes) [ 1.121704] TCP: Hash tables configured (established 16384 bind 16384) [ 1.128288] TCP: reno registered [ 1.131479] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 1.137497] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 1.144152] NET: Registered protocol family 1 [ 1.149898] audit: initializing netlink socket (disabled) [ 1.155272] type=2000 audit(0.968:1): initialized [ 1.403004] HugeTLB registered 1 MB page size, pre-allocated 0 pages [ 1.409321] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 1.415673] HugeTLB registered 16 MB page size, pre-allocated 0 pages [ 1.422119] HugeTLB registered 64 MB page size, pre-allocated 0 pages [ 1.428574] HugeTLB registered 256 MB page size, pre-allocated 0 pages [ 1.435111] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 1.451734] NTFS driver 2.1.30 [Flags: R/O]. [ 1.456216] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 1.463449] msgmni has been set to 3851 [ 1.469940] async_tx: api initialized (async) [ 1.474543] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 1.481891] io scheduler noop registered [ 1.485805] io scheduler deadline registered [ 1.490227] io scheduler cfq registered (default) [ 1.495619] Freescale Display Interface Unit (DIU) framebuffer driver [ 1.502005] fsl_diu_perpare: Borad not support DIU. Can’t dispaly video. [ 1.551125] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.558490] serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 12500000) is a 16550A_FSL64 [ 1.567787] console [ttyS0] enabled, bootconsole disabled [ 1.567787] console [ttyS0] enabled, bootconsole disabled [ 1.579116] serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 12500000) is a 16550A_FSL64 [ 1.588990] serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 12500000) is a 16550A_FSL64 [ 1.598859] serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 12500000) is a 16550A_FSL64 [ 1.608551] ePAPR hypervisor byte channel driver [ 1.613660] misc_register: 10, 183 hw_random [ 1.622604] brd: module loaded [ 1.625703] misc_register: 10, 237 loop-control [ 1.632807] loop: module loaded [ 1.636208] st: Version 20101219, fixed bufsize 32768, s/g segs 256 [ 1.643240] fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init [ 1.650383] scsi0 : sata_fsl [ 1.653528] ata1: SATA max UDMA/133 irq 68 [ 1.659770] fsl_espi ffe110000.spi: master is unqueued, this is deprecated [ 1.667053] m25p80 spi32766.0: found w25q32, expected mx25u3235f [ 1.673097] m25p80 spi32766.0: w25q32 (4096 Kbytes) [ 1.678080] 9 ofpart partitions found on MTD device spi32766.0 [ 1.683939] Creating 9 MTD partitions on “spi32766.0”: [ 1.689108] 0x000000000000-0x000000100000 : “NOR (RW) WG U-Boot Image” [ 1.724754] ftl_cs: FTL header not found. [ 1.729254] 0x000000100000-0x000000110000 : “NOR (RW) WG U-Boot ENV” [ 1.737661] ftl_cs: FTL header not found. [ 1.742103] 0x000000110000-0x000000130000 : “NOR (RW) FMAN UCODE” [ 1.752149] ftl_cs: FTL header not found. [ 1.756609] 0x000000130000-0x000000200000 : “NOR (RW) WG EMPYT-HOLE” [ 1.786809] ftl_cs: FTL header not found. [ 1.791270] 0x000000200000-0x000000220000 : “NOR (RW) WG CFG0” [ 1.801025] ftl_cs: FTL header not found. [ 1.805472] 0x000000220000-0x000000230000 : “NOR (RW) WG CFG1” [ 1.813415] ftl_cs: FTL header not found. [ 1.817893] 0x000000230000-0x000000250000 : “NOR (RW) WG MFG” [ 1.827485] ftl_cs: FTL header not found. [ 1.831970] 0x000000250000-0x000000300000 : “NOR (RW) WG bootOpt Data & reserved” [ 1.859458] ftl_cs: FTL header not found. [ 1.863929] 0x000000300000-0x000000400000 : “NOR (RW) WG extra reserved” [ 1.900179] ftl_cs: FTL header not found. [ 1.905150] fsl_espi ffe110000.spi: at 0x8000080080114000 (irq = 53) [ 1.914750] libphy: Fixed MDIO Bus: probed [ 1.919931] libphy: Freescale XGMAC MDIO Bus: probed [ 1.925140] libphy: Freescale XGMAC MDIO Bus: probed [ 1.930614] mdio_bus ffe4fd000: cannot get PHY at address 1 [ 1.936483] libphy: Freescale XGMAC MDIO Bus: probed [ 1.941611] libphy: Freescale XGMAC MDIO Bus: probed [ 1.946879] libphy: Freescale XGMAC MDIO Bus: probed [ 1.952063] libphy: Freescale XGMAC MDIO Bus: probed [ 1.960939] cpu0/0: > WARNING (FM) [CPU00, /builds/utm-12_0_2/src/546738/linux/drivers/net/ethernet/freescale/fman/Peripherals/FM/fm.c:3514 FM_Init]: [ 1.974302] cpu0/0: Hack: No FM reset! [ 1.978242] cpu0/0: [ 1.984005] Freescale FM module (Nov 16 2017:10:41:12), FMD API version 21.1.0 [ 1.993681] Freescale FM Ports module (Nov 16 2017:10:41:12) [ 1.999383] dpaa_debugfs: FSL DPAA Ethernet debugfs entries () [ 2.005263] dpaa_generic_debugfs: FSL DPAA Ethernet debugfs entries () [ 2.011832] fsl_mac: fsl_mac: FSL FMan MAC API based driver () [ 2.017915] fman_memac_init: IF_MODE 5006 [ 2.021957] fsl_mac ffe4e4000.ethernet: FMan MEMAC [ 2.026774] fsl_mac ffe4e4000.ethernet: FMan MAC address: 00:0b:6b:01:01:03 [ 2.033870] fman_memac_init: IF_MODE 5006 [ 2.037905] fsl_mac ffe4e6000.ethernet: FMan MEMAC [ 2.042725] fsl_mac ffe4e6000.ethernet: FMan MAC address: 00:0b:6b:01:01:04 [ 2.049994] fsl_dpa: FSL DPAA Ethernet driver () [ 2.054881] fsl_dpa ethernet.13: of_find_device_by_node(/soc@ffe000000/fman@400000/ethernet@e0000) failed [ 2.064526] fsl_dpa: probe of ethernet.13 failed with error -22 [ 2.070559] fsl_dpa ethernet.14: of_find_device_by_node(/soc@ffe000000/fman@400000/ethernet@e2000) failed [ 2.080186] fsl_dpa: probe of ethernet.14 failed with error -22 [ 2.088962] fsl_dpa: fsl_dpa: Probed interface eth0 [ 2.096513] fsl_dpa: fsl_dpa: Probed interface eth1 [ 2.101560] fsl_dpa_shared: FSL DPAA Shared Ethernet driver () [ 2.107749] fsl_dpa_proxy: FSL DPAA Proxy initialization driver () [ 2.114189] fsl_oh: FSL FMan Offline Parsing port driver () [ 2.119989] fsl_oh dpa-fman0-oh.17: Found OH node handle compatible with fsl,dpa-oh. [ 2.127801] fsl_oh dpa-fman0-oh.17: Allocating 0 ingress frame queues duples [ 2.135213] fsl_oh dpa-fman0-oh.17: OH port /soc@ffe000000/fman@400000/port@83000 enabled. [ 2.143521] fsl_oh dpa-fman0-oh.17: Default egress frame queue: 105 [ 2.149814] fsl_oh dpa-fman0-oh.17: Default error frame queue: 104 [ 2.156017] fsl_oh dpa-fman0-oh.17: Initialized queues: [ 2.161952] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver [ 2.168863] ehci-pci: EHCI PCI platform driver [ 2.173591] /soc@ffe000000/usb@210000: Invalid ‘dr_mode’ property, fallback to host mode [ 2.181768] ata1: Signature Update detected @ 508 msecs [ 2.187272] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller [ 2.193949] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1 [ 2.211298] fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000 [ 2.227464] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00 [ 2.233482] hub 1-0:1.0: USB hub found [ 2.237278] hub 1-0:1.0: 1 port detected [ 2.241552] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller [ 2.248221] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2 [ 2.265564] fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000 [ 2.279466] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00 [ 2.285466] hub 2-0:1.0: USB hub found [ 2.289262] hub 2-0:1.0: 1 port detected [ 2.293667] usbcore: registered new interface driver usbserial [ 2.299627] usbcore: registered new interface driver usbserial_generic [ 2.306262] usbserial: USB Serial support registered for generic [ 2.312386] usbcore: registered new interface driver pl2303 [ 2.318059] usbserial: USB Serial support registered for pl2303 [ 2.324976] i2c /dev entries driver [ 2.328811] mpc-i2c ffe118000.i2c: timeout 1000000 us [ 2.335063] rtc-ds1307: probe of 0-0068 failed with error -5 [ 2.345569] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0 [ 2.352407] mpc-i2c ffe118100.i2c: timeout 1000000 us [ 2.357521] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.363866] ata1.00: ATA-10: InnoDisk Corp. – mSATA 3ME4, L17606, max UDMA/133 [ 2.371126] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 16/32) [ 2.372252] mpc-i2c ffe119000.i2c: timeout 1000000 us [ 2.372554] mpc-i2c ffe119100.i2c: timeout 1000000 us [ 2.387923] pca954x 1-0077: probe failed [ 2.391996] booke_wdt: powerpc book-e watchdog driver loaded [ 2.397759] misc_register: 10, 130 watchdog [ 2.401995] ata1.00: configured for UDMA/133 [ 2.402371] md: raid6 personality registered for level 6 [ 2.402373] md: raid5 personality registered for level 5 [ 2.402374] md: raid4 personality registered for level 4 [ 2.402376] Freescale(R) MPC85xx EDAC driver, (C) 2006 Montavista Software [ 2.403000] mpc85xx_mc_err_probe: No ECC DIMMs discovered [ 2.404569] sdhci: Secure Digital Host Controller Interface driver [ 2.404571] sdhci: Copyright(c) Pierre Ossman [ 2.404572] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.406266] Freescale USDPAA process driver [ 2.406268] fsl-usdpaa: no region found [ 2.406270] Freescale USDPAA process IRQ driver [ 2.406275] misc_register: 10, 61 fsl-usdpaa-irq [ 2.406900] Freescale pme2 db driver [ 2.406903] PME2: fsl_pme2_db_init: not on ctrl-plane [ 2.406904] Freescale pme2 scan driver [ 2.406907] misc_register: 10, 60 pme_scan [ 2.407012] fsl-pme2-scan: device pme_scan registered [ 2.407301] Freescale hypervisor management driver [ 2.407345] fsl-hv: no hypervisor found [ 2.407585] TCP: cubic registered [ 2.407587] Initializing XFRM netlink socket [ 2.408215] NET: Registered protocol family 10 [ 2.409012] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 2.409018] NET: Registered protocol family 17 [ 2.409039] NET: Registered protocol family 15 [ 2.409541] misc_register: 10, 59 cpu_dma_latency [ 2.409678] misc_register: 10, 58 network_latency [ 2.409777] misc_register: 10, 57 network_throughput [ 2.410530] misc_register: 10, 56 ubi_ctrl [ 2.410674] fsl_dpa_macless: FSL DPAA MACless Ethernet driver () [ 2.411044] fsl_dpa_generic: FSL DPAA Generic Ethernet driver () [ 2.555942] scsi 0:0:0:0: Direct-Access ATA InnoDisk Corp. – L176 PQ: 0 ANSI: 5 [ 2.564623] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB) [ 2.572557] rtc-s35390a 0-0030: setting system clock to 2018-04-08 01:16:18 UTC (1523150178) [ 2.581329] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.583582] sd 0:0:0:0: [sda] Write Protect is off [ 2.583640] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA [ 2.600980] Waiting 2 sec before mounting root device… [ 2.601661] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 > [ 2.603136] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.619513] md: Waiting for all devices to be available before autodetect [ 4.626338] md: If you don’t use raid, use raid=noautodetect [ 4.632535] md: Autodetecting RAID arrays. [ 4.636664] md: Scanned 0 and added 0 devices. [ 4.641122] md: autorun … [ 4.643923] md: … autorun DONE. [ 4.649134] VFS: Mounted root (ext2 filesystem) on device 8:3. [ 4.655409] Freeing unused kernel memory: 432K (c000000000b51000 – c000000000bbd000) [ 5.038231] Running /etc/runlevel/1/S02rootrw…Done. [ 5.041763] Running /etc/runlevel/1/S05mproc…Done. [ 5.043109] Running /etc/runlevel/1/S05sysfs…Done. [ 5.044312] Running /etc/runlevel/1/S10armled…Done. [ 5.051242] Running /etc/runlevel/1/S10diskpt…Done. [ 5.053129] Running /etc/runlevel/1/S18seed-random…Reseeded random generator [ 5.055541] Done. [ 5.076334] Running /etc/runlevel/2/S10var…Done. [ 5.078511] Running /etc/runlevel/2/S11shm…Done. [ 5.079887] Running /etc/runlevel/2/S13devpts…Done. [ 5.081094] Running /etc/runlevel/2/S14temp…Done. [ 5.082075] Running /etc/runlevel/2/S15hosts…Done. [ 5.083686] Running /etc/runlevel/2/S16pending…mke2fs 1.41.0 (10-Jul-2008) [ 5.099636] Filesystem label= [ 5.099746] OS type: Linux [ 5.099828] Block size=4096 (log=2) [ 5.099938] Fragment size=4096 (log=2) [ 5.100067] 146016 inodes, 583680 blocks [ 5.100192] 29184 blocks (5.00%) reserved for the super user [ 5.100378] First data block=0 [ 5.100472] Maximum filesystem blocks=599785472 [ 5.100619] 18 block groups [ 5.100704] 32768 blocks per group, 32768 fragments per group [ 5.100895] 8112 inodes per group [ 5.100998] Superblock backups stored on blocks: [ 5.101151] 32768, 98304, 163840, 229376, 294912 [ 5.101305] [ 5.101343] Writing inode tables: 0/18����� 1/18����� 2/18����� 3/18����� 4/18����� 5/18����� 6/18����� 7/18����� 8/18����� 9/18�����10/18�����11/18�����12/18�����13/18�����14/18�����15/18�����16/18�����17/18�����done [ 5.166402] Writing superblocks and filesystem accounting information: done [ 5.912432] [ 5.912532] This filesystem will be automatically checked every 20 mounts or [ 5.912770] 180 days, whichever comes first. Use tune2fs -c or -i to override. [ 5.936621] Done. [ 5.936752] Running /etc/runlevel/2/S18data…fsck 1.41.0 (10-Jul-2008) [ 5.947991] e2fsck 1.41.0 (10-Jul-2008) [ 5.966846] /dev/wgrd.sysa_data: clean, 491/48640 files, 37099/7[ 5.726493] kjournald starting. Commit interval 5 seconds 78240 blocks [ 5.734733] EXT3-fs (sda5): using internal journal [ 5.740626] EXT3-fs (sda5): mounted filesystem with ordered data mode [ 5.991131] Done. [ 5.991286] Running /etc/runlevel/2/S18data2…fsck 1.41.0 (10-Jul-2008) [ 5.999648] e2fsck 1.41.0 (10-Jul-2008) [ 6.023571] /dev/wgrd.data2: clean, 12/647168 files, 7911[ 5.783868] kjournald starting. Commit interval 5 seconds 2/2586552 blocks [ 5.790757] EXT3-fs (sda7): using internal journal [ 5.797098] EXT3-fs (sda7): mounted filesystem with ordered data mode [ 6.047422] Done. [ 6.047576] Running /etc/runlevel/2/S18fips…Done. [ 6.049028] Running /etc/runlevel/2/S18hotplug…Done. [ 6.061119] Running /etc/runlevel/2/S18kdump…Modified cmdline:”console=ttyS0,115200″ elfcorehdr=247144K root=/dev/sda3 [ 6.361989] segment[0].mem:0xe800000 memsz:9740288 [ 6.362215] segment[1].mem:0xf14a000 memsz:65536 [ 6.362379] segment[2].mem:0xf15a000 memsz:4096 [ 6.362539] segment[3].mem:0xf15b000 memsz:36864 [ 6.362702] segment[4].mem:0xffef000 memsz:69632 [ 7.354847] kdump T35 [ 7.354950] Done. [ 7.355141] Running /etc/runlevel/2/S19caam…[ 7.121704] platform caam_qi.0: Linux CAAM Queue I/F driver initialised [ 7.128392] caam ffe300000.crypto: Entropy delay = 3200 [ 7.133703] caam ffe300000.crypto: Instantiated RNG4 SH0 [ 7.153755] caam ffe300000.crypto: Instantiated RNG4 SH1 [ 7.159247] caam ffe300000.crypto: device ID = 0x0a12050000000000 (Era 8) [ 7.166068] caam ffe300000.crypto: job rings = 4, qi = 1 [ 7.186601] caam_jr ffe301000.jr: registering rng-caam [ 7.435046] caam algorithms registered in /proc/crypto [ 8.884511] platform caam_qi.0: fsl,sec-v5.0 algorithms registered in /proc/crypto [ 8.895166] caam ffe300000.crypto: fsl,sec-v5.0 algorithms registered in /proc/crypto Done. [ 9.147257] Running /etc/runlevel/2/S19fips…Done. [ 9.148792] Running /etc/runlevel/2/S19ipv6…disabling IPv6 autoconf for all [ 9.150798] disabling IPv6 autoconf for default [ 9.150953] enable IPv6 forwarding for all [ 9.1[ 8.923396] usbcore: registered new interface driver usb-storage 51120] enable IPv6 forwarding fo[ 8.933675] wgipc: module license ‘Watchguard Proprietary’ taints kernel. r default [ 9.151265] disabl[ 8.941153] Disabling lock debugging due to kernel taint ing IPv6 for all [ 9.151371] disabling IPv6 for default [ 9.151490] Done. [ 9.151678] Running /etc/runlevel/2/S19platform…Done. [ 9.152866] Running /etc/runlevel/2/S20cleanup[ 8.963294] [ 8.963294] wg_dsa_init: Built Nov 16 2017 10:43:15CPU 1024 SW 1 Flags 2929 [ 8.963294] -dbg…Done. [ 9.153697] Run[ 8.975999] wg_dsa_init: mdio found ffe4fc000.mdio ning /etc/runlevel/2/S20fipstest[ 8.983539] wg_dsa_init: Rename eth0 -> eth10 …Done. [ 9.154915] Running /etc/runlevel/2/S20gwc…Done. [ 9.156057] Running /etc/runlevel/2/S20sigs…Done. [ 9.161959] Running /etc/runlevel/2/[ 9.003692] wg_dsa_init: Rename eth1 -> eth11 S20usb…Done. [ 9.175436] Running /etc/runlevel/2/S20wgbase…Done. [ 9.199915] Running /etc/runlevel/2/S21eth…[ 9.027609] wg_dpaa_set_L2_off: eth10 L2 off 2 [ 9.032354] Distributed Switch Architecture driver version 0.1 [ 9.038286] mv88e6123_61_65_probe: SW16 88E6176 [ 9.047323] wg_dsa_88e617x_init: phy 0 id 141 eb1 [ 9.057271] wg_dsa_88e617x_init: phy 1 id 141 eb1 [ 9.067191] wg_dsa_88e617x_init: phy 2 id 141 eb1 [ 9.077116] wg_dsa_88e617x_init: phy 3 id 141 eb1 [ 9.087071] wg_dsa_88e617x_init: phy 4 id 141 eb1 [ 9.092267] wg_dsa_88e617x_init: cpu 5 [ 9.096323] wg_dsa_88e617x_init: cpu 6 [ 9.100263] eth10[0]: detected a Marvell 88E6176 switch [ 9.137096] libphy: dsa slave smi: probed [ 9.141159] dsa_slave_create: eth0 Marvell headers enabled, len 16 [ 9.173567] dsa_slave_create: eth1 Marvell headers enabled, len 16 [ 9.201990] dsa_slave_create: eth2 Marvell headers enabled, len 16 [ 9.230427] wg_dsa_init: Split sw10 code 0 dsa c000000005fe6f00 [ 9.236377] wg_dsa_init: Rename eth10 -> sw10 [ 9.255647] device sw10 entered promiscuous mode [ 9.260332] dsa_change_master_mtu: sw10 MTU 1506 [ 9.264974] wg_dpaa_set_L2_off: eth11 L2 off 2 [ 9.269801] mv88e6123_61_65_probe: SW17 88E6176 [ 9.279328] wg_dsa_88e617x_init: phy 0 id 141 eb1 [ 9.289269] wg_dsa_88e617x_init: phy 1 id 141 eb1 [ 9.299156] wg_dsa_88e617x_init: phy 2 id 141 eb1 [ 9.309108] wg_dsa_88e617x_init: phy 3 id 141 eb1 [ 9.319053] wg_dsa_88e617x_init: phy 4 id 141 eb1 [ 9.324249] wg_dsa_88e617x_init: cpu 5 [ 9.328305] wg_dsa_88e617x_init: cpu 6 [ 9.332242] eth11[0]: detected a Marvell 88E6176 switch [ 9.364760] libphy: dsa slave smi: probed [ 9.368825] dsa_slave_create: eth3 Marvell headers enabled, len 16 [ 9.404809] dsa_slave_create: eth4 Marvell headers enabled, len 16 [ 9.434631] wg_dsa_init: Split sw11 code 0 dsa c00000007be67200 [ 9.440581] wg_dsa_init: Rename eth11 -> sw11 [ 9.463678] device sw11 entered promiscuous mode [ 9.468367] dsa_change_master_mtu: sw11 MTU 1506 Done. [ 11.718223] Running /etc/runlevel/2/S21trousers…model = T35 [ 11.734629] Done. [ 11.734750] Running /etc/runlevel/2/S22hwmon…Done. [ 11.749939] Running /etc/runlevel/2/S22login…Done. [ 11.750690] Running /etc/runlevel/2/S22rtc…Done. [ 11.758578] Running /etc/runlevel/2/S23pppoe…[ 11.520336] PPP generic driver version 2.4.2 [ 11.538612] PPP MPPE Compression module registered [ 11.546507] PPP Deflate Compression module registered [ 11.552850] NET: Registered protocol family 24 Done. [ 11.803203] Running /etc/[ 11.562372] tun: Universal TUN/TAP device driver, 1.6 runlevel/2/S23sslvpn…[ 11.567644] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com> [ 11.575873] misc_register: 10, 200 tun Done. [ 11.824112] Running /etc/runl[ 11.582320] misc_register: 10, 224 tpm0 evel/2/S23tpm…[ 11.608716] tpm_i2c_atmel 1-0029: Issuing TPM_STARTUP Done. [ 11.984838] Running /etc/runlevel/2/S24cfghash…config.hash written. [ 12.123788] Done. [ 12.123856] Running /etc/runlevel/2/S24fmcsetup…[ 12.031156] FM-0-port-1g-RX-2 [ 2] START 0 NIA 0x00440020 [ 12.037399] FM-0-port-1g-RX-3 [ 3] START 0 NIA 0x00440020 FMC Model T35 [ 12.435524] Done. [ 12.435603] R[ 12.194724] l2tp_core: L2TP core driver, V2.0 unning /etc/runlevel/2/S24l2tpvp[ 12.202391] l2tp_netlink: L2TP netlink interface n…[ 12.210410] l2tp_ppp: PPPoL2TP kernel driver, V2.0 Done. [ 12.459127] Running /etc/runlevel/2/S24nginx…Done. [ 12.459810] Running /etc/runlevel/2/S25core…Done. [ 12.461217] Running /etc/runlevel/2/S25wgcfg…Info: No conversion required from version 12.0.2 to 12.0.2. [ 12.711764] Done. [ 12.711860] Running /etc/runlevel/2/S27cfgcheck…Config ok [ 13.707136] Done. [ 13.707236] Running /etc/runlevel/2/S29wgcore…[ 13.471540] fsl_dpa ethernet.15 sw10: link up, 1000 Mb/s, full duplex, flow control disabled Done. [ 13.725034][ 13.483063] fsl_dpa ethernet.16 sw11: link up, 1000 Mb/s, full duplex, flow control disabled Running /etc/runlevel/2/S30net…[ 13.498458] Bridge firewalling registered [ 13.505005] Ebtables v2.0 registered [ 13.550392] gre: GRE over IPv4 demultiplexor driver [ 13.561839] ip_gre: GRE over IPv4 tunneling driver [ 13.583853] bvpn vif handlers are registered [ 13.589901] IPv4 over IPSec tunneling driver [ 13.610262] 8021q: 802.1Q VLAN Support v1.8 [ 13.624019] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011) [ 13.631212] bonding: MII link monitoring set to 100 ms Done. [ 13.882160] Running /etc/runlevel/2/S30upgrade…Done. [ 13.884303] Running /etc/runlevel/2/S30wireless…start load wireless modules [ 13.897097] Done. [ 13.897163] Running /etc/runlevel/2/S31cacert…Done. [ 13.898799] Running /etc/runlevel/2/S31cert…SSLVPN may not work. Default dh file [/etc/defaults/certs/sslvpn-dh] not found [ 13.948605] Done. [ 13.948672] Running /etc/runlevel/2/S31crypto…Done. [ 13.957657] Running /[ 13.718315] Netfilter messages via NETLINK v0.30. etc/runlevel/2/S31purgecert…Done. [ 13.958308] Running /etc[ 13.728586] ip_set: protocol 6 /runlevel/2/S31xtables…[ 13.798130] nf_conntrack version 0.5.0 (15408 buckets, 61632 max) [ 13.804296] nf_conntrack_init_start: conntrack max=61632 high water mark=49305 [ 13.819934] ip_tables: (C) 2000-2006 Netfilter Core Team [ 13.843374] nf_ct_ftp: Maximum expected value 1 [ 13.893304] ctnetlink v0.93: registering with nfnetlink. [ 14.006707] arp_tables: (C) 2002 David S. Miller [ 14.033762] u32 classifier [ 14.036515] input device check on [ 14.040192] Actions configured [ 14.058355] Mirror/redirect action on Done. [ 14.325131] Running /etc/runlevel/2/S31xtables6…Done. [ 14.345545] Running /etc/runlevel/2/S32auth…Done. [ 14.351243] Running /etc/runlevel/2/S32clst…Done. [ 14.373652] Running /etc/runlevel/2/S32modemdrivers…[ 14.142093] usbcore: registered new interface driver option [ 14.147972] usbserial: USB Serial support registered for GSM modem (1-port) [ 14.157698] usbcore: registered new interface driver wg_sierra [ 14.163850] usbserial: USB Serial support registered for Sierra USB modem [ 14.174810] usbcore: registered new interface driver cdc_wdm [ 14.187486] usbcore: registered new interface driver cdc_acm [ 14.193188] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 14.205775] usbcore: registered new interface driver GobiSerial [ 14.211993] usbserial: USB Serial support registered for GobiSerial [ 14.218313] GobiSerial: 2013-10-08/NTGR_2.12:GobiSerial [ 14.238453] usbcore: registered new interface driver cdc_ether [ 14.250638] usbcore: registered new interface driver rndis_host [ 14.263041] usbcore: registered new interface driver sierra_net [ 14.277589] GobiNet: 2013-10-08/NTGR_2.21 [ 14.281900] usbcore: registered new interface driver GobiNet [ 14.295100] usbcore: registered new interface driver qmi_wwan [ 14.306837] usbcore: registered new interface driver cdc_ncm [ 14.317554] usbcore: registered new interface driver huawei_cdc_ncm Done. [ 14.567788] Running /etc/runl[ 14.326727] nf_fastpath: Loaded evel/2/S32wgxt…[ 14.334440] ipt_addrpairs_6 v0.1.0: Loading [ 14.342742] xt_session6 : Loading [ 14.346121] xt_session6 : Loaded limit 1000 hash 1024 WG IPC ID 184549376 (0x0B000000) [ 14.364163] ipt_addrpairs: ADDRPAIRS SCALE Set MAX 16384 Entry Max 16384 [ 14.370941] ipt_addrpairs: v1.0.0 Loaded [ 14.378656] xt_ifset: Loaded with set limit 5000 and entry limit 5000 [ 14.387224] xt_classify : Loaded [ 14.391665] xt_master: Loaded [ 14.395758] xt_MASTER: Loaded [ 14.400060] xt_WGTEE: Loaded [ 14.404473] Schedule: Loaded [ 14.408489] xt_POLICY: Loaded [ 14.420245] xt_policy : Loaded [ 14.424542] xt_EXPIRES: Loaded [ 14.431026] xt_IPPRECEDENCE: Loaded [ 14.441700] xt_PKTCACHE: Loaded [ 14.449871] xt_session : Loaded limit 1000 hash 1024 WG IPC ID 92274688 (0x05800000) [ 14.468687] xt_CONNCLASSIFY: Loaded [ 14.473191] xt_connclassify : Loaded [ 14.478583] xt_ipspoof : Loaded [ 14.491681] xt_LBDNAT: Loaded [ 14.499298] xt_MWAN: Loaded [ 14.511702] xt_psd: Loaded [ 14.515983] xt_ipsd: Loaded [ 14.520388] xt_ddos: Loaded [ 14.525081] xt_dos: Loaded [ 14.532743] xt_wgaccount: Loaded [ 14.545385] xt_block : Loaded limit 1000 hash 1024 WG IPC ID 155189248 [ 14.555735] xt_localroute: Loaded [ 14.564149] xt_duplicate: Loaded [ 14.574083] xt_WGCLASSIFY: Loaded [ 14.601359] xt_fqdn : Loading [ 14.607340] /builds/utm-12_0_2/src/546738/components/firewall/build/baring/linux/wg-xtables-addons/xt_devsec.c:1516:devsec_init: [ 14.618814] devsec : Loaded limit 1000 hash 1024 WGIPC ID 260046848 (0x0F800000) [ 14.628709] GEO:xt_geo_init:618 Loaded limit 300 hash 512 WGIPC ID 272629760 (0x10400000) [ 14.628709] Done. [ 14.882386] Running /etc/runlevel/2/S33appID…[ 14.873676] * Make sure sizeof(struct sw_struct)=112 is consistent [ 14.882469] WG workqueue: Loaded [ 14.895705] bw driver: Loaded Done. [ 15.142602] Running /etc/runlevel/2/S35nropen…updated /proc[ 14.904690] Proxy glue: Loaded 10:52:24 (248) /sys/fs/nr_open with new value: 2097152 [ 15.143756] Done. [ 15.143863] Running /etc/runlevel/2/S35proxy…Setting the proxy tmpfs size to size=481m. [ 15.165257] Done. [ 15.165369] Running /etc/runlevel/2/S35scand…Done. [ 15.171114] Running /etc/runlevel/2/S36dynroute…Done. [ 15.171993] Running /etc/runlevel/2/S42ssh…Done. [ 15.173498] Running /etc/runlevel/2/S42tpm_restore…systemdata file not provided, defaulting to (/etc/wg/tcsd/lib/tpm/system.data) [ 15.248995] restoring [ 15.249080] model = T35 [ 15.249162] restore complete: systemdata_payload restore OK, length:2352 [ 15.249386] model = T35 [ 15.249469] Done. [ 15.249525] Running /etc/runlevel/2/S44sysb…Done. [ 15.252510] Running /etc/runlevel/2/S50nettune…Setting IPv4 route garbage collection timeout to 2 minutes [ 15.253617] Setting promote_secondaries to 1 [ 15.253763] Setting icmp_errors_use_inbound_ifaddr to 1 [ 15.253937] Done. [ 15.253991] Running /etc/runlevel/2/S80seed-random…Saved random seed [ 15.263729] Done. [ 15.263790] Running /etc/runlevel/2/S90bootmon…Done. [ 15.269842] Running /etc/runlevel/2/S90kcrashrep…Done. [ 15.296817] Running /etc/runlevel/2/S98setmacs…setting device eth0 to 00:90:7f:ba:44:18 [ 15.340001] setting device eth1 to 00:90:7f:ba:44:19 [ 15.340185] setting device eth2 to 00:90:7f:ba:44:1a [ 15.340350] setting device eth3 to 00:90:7f:ba:44:1b [ 15.340532] setting device eth4 to 00:90:7f:ba:44:1c [ 15.340697] Done. [ 15.340751] Running /etc/runlevel/2/S99igmp…Done. [ 15.341261] Running /etc/runlevel/2/S99rootro…Done. [ 21.043935] Running /etc/runlevel/4/S51armled…Done. [ 21.054723] Running /etc/runlevel/4/S80chkupgrade…Done. [ 21.078369] Running /etc/runlevel/4/S81ckwebupload…Done.