ZIO 3300N
ZIO 3300 N
(Est.) release date: 08 April 2011
Country of manuf.: China
Type: wireless router
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: Realtek RTL8196C (390 MHz)
FLA1: 2 MiB2,097,152 B <br />16,384 Kib <br />2,048 KiB <br />16 Mib <br />0.00195 GiB <br /> (Macronix MX25L1606EM2I-12G)
RAM1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (EtronTech EM639165TS-6G)
Expansion IFs: none specified
WI1 chip1: Realtek RTL8192CE
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: none
ETH chip1: Realtek RTL8196C
Switch: Realtek RTL8196C
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bgn
Stock bootloader: rtkload v1.1f
Stock FW OS: Linux 2.6.30.9 Realtek SDK v2.5-r7984
Default SSID: zio
Default IP address: 192.168.10.1
the IP 192.168.10.1 is used by 119 additional devices
of which 2 are ZIO devices
For a list of all currently documented Realtek chipsets with specifications, see Realtek.
"ZIO-3300N (2011. Bless Inc.)", "ST-NR5TA", and "2011/04/08 VER:1.3" is silkscreened on the board.
Serial
Pinout
Info derived from
• boot log |
---|
Booting... ========== SPI ============= ---RealTek(RTL8196C)at 2011.04.06-10:30+0900 version v1.1f [16bit](390MHz) Jump to image start=0x80500000... decompressing kernel: Uncompressing Linux... done, booting the kernel. done decompressing kernel. start address: 0x80003600 RTL8192C/RTL8188C driver version 1.6 (2011-07-18) Probing RTL8186 10/100 NIC-kenel stack size order[3]... chip name: 8196C, chip revid: 0 NOT YET eth0 added. vid=9 Member port 0x1... eth1 added. vid=8 Member port 0x10... eth2 added. vid=9 Member port 0x2... eth3 added. vid=9 Member port 0x4... eth4 added. vid=9 Member port 0x8... [peth0] added, mapping to [eth1]... init started: BusyBox v1.13.4 (2011-11-30 17:25:56 KST) Init Start... Init bridge interface... Init Wlan application... Init WAN Interface... # |
cat /proc/version
# cat /proc/version Linux version 2.6.30.9 (root@minkyu-desktop) (gcc version 3.4.6-1.3.6) #47 Wed Nov 30 17:29:30 KST 2011
cat /proc/cmdline
# cat /proc/cmdline console=ttyS0,38400 root=/dev/mtdblock1
cat /proc/meminfo + free
# cat /proc/meminfo MemTotal: 11184 kB MemFree: 1876 kB Buffers: 720 kB Cached: 3052 kB SwapCached: 0 kB Active: 1712 kB Inactive: 2528 kB Active(anon): 468 kB Inactive(anon): 0 kB Active(file): 1244 kB Inactive(file): 2528 kB SwapTotal: 0 kB SwapFree: 0 kB Dirty: 0 kB Writeback: 0 kB AnonPages: 480 kB Mapped: 584 kB Slab: 4640 kB SReclaimable: 248 kB SUnreclaim: 4392 kB PageTables: 84 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 5592 kB Committed_AS: 1516 kB VmallocTotal: 1048404 kB VmallocUsed: 264 kB VmallocChunk: 1048136 kB # free total used free shared buffers Mem: 11184 9312 1872 0 720 Swap: 0 0 0 Total: 11184 9312 1872
cat /proc/mtd
# cat /proc/mtd dev: size erasesize name mtd0: 00100000 00001000 "boot+cfg+linux" mtd1: 00100000 00001000 "root fs"
ps aux
# ps aux PID USER VSZ STAT COMMAND 1 root 1216 S init 2 root 0 SW< [kthreadd] 3 root 0 SW< [ksoftirqd/0] 4 root 0 SW< [events/0] 5 root 0 SW< [khelper] 6 root 0 SW< [async/mgr] 7 root 0 SW< [kblockd/0] 8 root 0 SW [pdflush] 9 root 0 SW< [kswapd0] 10 root 0 SW< [mtdblockd] 140 root 956 S udhcpd /var/udhcpd.conf 161 root 948 S udhcpc -i eth1 -p /etc/udhcpc/udhcpc-eth1.pid -s /usr 170 root 916 S reload -k /var/wlsch.conf 185 root 1984 S webs 186 root 1224 S -/bin/sh 196 root 1216 R ps aux
cat /proc/cpuinfo
# cat cpuinfo system type : RTL8196C processor : 0 cpu model : 52481 BogoMIPS : 389.12 tlb_entries : 32 mips16 implemented : yes
cat /etc/version
# cat version RTL8196C v1.0 -- 2011. 11. 30. (수) 17:27:20 KST The SDK version is: Realtek SDK v2.5-r7984 Ethernet driver version is: 7953-7929 Wireless driver version is: 7977-7977 Fastpath source version is: 7873-6572 Feature support version is: 7927-7480
Images