Edimax BR-6675nD
Edimax BR-6675nD
Type: wireless router
FCC ID: NDD9566751028
Power: 12 VDC, 1.25 A
Connector type: barrel
CPU1: Ralink RT3883 (500 MHz)
FLA1: 8 MiB8,388,608 B <br />65,536 Kib <br />8,192 KiB <br />64 Mib <br />0.00781 GiB <br /> (Macronix MX29LV640EBTI-70G)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Winbond W9751G6JB-25)
Expansion IFs: none specified
WI1 chip1: Ralink RT3883
WI1 802dot11 protocols: an
WI1 MIMO config: 3x3:3
WI1 antenna connector: U.FL, RP-SMA
WI2 chip1: Ralink RT3092
WI2 802dot11 protocols: bgn
WI2 MIMO config: 2x2:2
WI2 antenna connector: U.FL, RP-SMA
ETH chip1: Ralink RT3883
Switch: Realtek RTL8367R-VB
LAN speed: 1G
LAN ports: 4
WAN speed: 1G
WAN ports: 1
abgn
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 57 are Edimax devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 73 are Edimax devices
802dot11 OUI: none specified
| FCC ID | |
|---|---|
| Hawking HD45R | NDD9566751028 |
| Intellinet 450N (524988) | NDD9566751028 |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
450Mbps Wireless Concurrent Dual-Band Gigabit iQ Router
- MEMORY
- • Flash: 8MB NOR
- • RAM: 64MB DDR2
- HARDWARE INTERFACE
- • WAN port: 1x RJ-45 Gigabit
- • LAN ports: 4x RJ-45 Gigabit
- • Antenna: 3x 3dBi dual-band antenna
- POWER ADAPTER
- • DC 5V, 1.25A
"1244-00000729-50Z" is silkscreened on the board.
The Hawking HD45R (re-branded + re-shelled 6675nD) is using
RTL8367R-VB, so this device is currently assumed to.. However, the
original RTL8367R revision may be used with at least some of these units.
The FCC photos seem to show the device with an A-cut Realtek RTL8367R.
According to the FCC manual, the default SSID is default.
Additional external links
