Open-Mesh OM2P-HSv2

Open-Mesh OM2P -HSv2

Manuf (OEM/ODM): Senao

Country of manuf.: Taiwan

Type: mesh node, access point

Power: 12 VDC, 1 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.1 mm (ID), 9.5 mm (LEN)
PoE tag: 802.3af, standard

CPU1: Atheros AR9341 (520 MHz)
FLA1: 16 MiB16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Spansion FL128PIFL)
RAM1: 64 MiB67,108,864 B <br />524,288 Kib <br />65,536 KiB <br />512 Mib <br />0.0625 GiB <br /> (Nanya NT5DS32M16DS-5T)

Expansion IFs: none specified

WI1 chip1: Atheros AR9341
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: U.FL

ETH chip1: Atheros AR9341
Switch: Atheros AR9341
LAN speed: 100M
LAN ports: 1
WAN speed: 100M
WAN ports: 1

bgn

TPFirmware supported: OpenWrt • (List | Dev | DLs)

Default SSID: open-mesh (5 addl. devices)
Default login user: root
Default login password: 0p3nm35h
root:0p3nm35h credentials used by 5 additional devices
of which 5 are Open-Mesh devices

802dot11 OUI: AC:86:74 (3 E, 3 W)
Ethernet OUI: AC:86:74 (3 E, 3 W)

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
Open-Mesh OM2P v1	Atheros	Atheros
Open-Mesh OM2P v2	Atheros	Atheros
Open-Mesh OM2P-HS	Atheros	Atheros
Open-Mesh OM2P-HSv2	Atheros	Atheros
Open-Mesh OM2P-LC	Atheros	Atheros

For a list of all currently documented Atheros (QCA) chipsets with specifications, see Atheros.

---

OM2P-HS 300Mbps Access Point

On Open-Mesh's store

Datasheet

The device uses two Lynwave ALA120-052022 antennas.

Difference between OM2P-HS and OM2P-HSv2:

• OM2P-HS has 1 port supporting passive POE only.
• OM2P-HSv2 (this device) has 1 port supporting passive POE only, and the 2nd port supporting standard 802.11af POE.

The Passive PoE implementation in this device consists of a Passive PoE feed with pins +4,5 and -7,8 at 18 VDC.