Banana Pi BPI M2
Banana Pi BPI M2 (V1.0)
(Est.) release date: December 2014
(Est.) initial retail price (in USD): $50
Country of manuf.: China
Type: single-board computer
Power: 5 VDC, 2 A
Connector type: barrel
Conn. measurements: 4 mm (OD), 1.7 mm (ID)
CPU1: Allwinner A31s (1 GHz, 4 cores)
FLA1: 0 MiB0 B <br />0 Kib <br />0 KiB <br />0 Mib <br />0 GiB <br /> (Brand? Model?)
RAM1: 1 GiB 1,024 MiB <br />1,073,741,824 B <br />8,388,608 Kib <br />1,048,576 KiB <br />8,192 Mib <br /> (Samsung K4B4G1646D-BCK0 × 2)
Expansion IFs: USB 2.0, USB 2.0 (OTG)
USB ports: 5
Serial: yes, 3.3V TTL, 3-pin header, populated, (115200 8N1)
WI1 module: AMPAK AP6181
WI1 module IF: SDIO (module)
WI1 chip1: Broadcom BCM43362
WI1 802dot11 protocols: bgn
WI1 MIMO config: 1x1:1
WI1 antenna connector: U.FL
ETH chip1: Allwinner A31s
ETH chip2: Realtek RTL8211E
LAN speed: 1GbE
LAN ports: 1
bgn
Additional chips
PMIC;X-Powers Limited;AXP221S;;1;
USB 2.0 High Speed 4-Port Hub Controller;JFD;FE1.1s;;1;
Stock bootloader: U-Boot 2011-09-rc1
Stock FW OS: Linux 3.3.0
Flags: Micro SD Card slot, HDMI 1.4, TRRS (3.5mm), microphone, IR receiver, CSI, LVDS
802dot11 OUI: none specified
Ethernet OUI: 02:44:07
| CPU1 brand | WI1 chip1 brand | WI1 chip2 brand | |
|---|---|---|---|
| Banana Pi BPI M2 | Allwinner | Broadcom | |
| Banana Pi BPI M2 Berry | Allwinner | Broadcom | |
| Banana Pi BPI M2 Pro | Amlogic | Realtek | |
| Banana Pi BPI M2 Ultra | Allwinner | Broadcom | |
| Banana Pi BPI M2 Zero | Allwinner | Broadcom | |
| Banana Pi BPI M2+ | Allwinner | Broadcom | |
| Banana Pi BPI M2S | Amlogic |
For a list of all currently documented Allwinner SoC's with specifications, see Allwinner.
For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.
- Banana Pi BPI-M2 on Wikipedia
- SinoVoip Banana Pi M2 on Sunxi Wiki
- Bananapi M2 on ARMbian
- BPI-M2-bsp on GitHub
News
- Banana Pi M2 is an Allwinner A31s Quad Core Board on CNX|Software
- Banana Pi project forks, as competing gen-2 SBCs emerge on LinuxGizmos
Specifications
- Banana Pi BPI-M2 Board
- CPU: Allwinner A31s Quad-core (ARM Cortex-A7)
- GPU: PowerVR SGX544, OpenGL ES 2.0, H.264/4K
- Memory: 1GB (DDR3) @432MHz RAM
- WiFi: AMPAK AP6181 module
- Video Input: A CSI input connector
- Video Outputs: Supports HDMI v1.4 or LVDS
- Audio Outputs: HDMI or Analog via TRSS (3.5mm)
- USB: 4x USB 2.0 host, 1x USB 2.0 (OTG) ports
- GPIO: 40x pins header, compatible w/ Raspberry Pi B+
- Power: 5V/2A barrel plug
See also
- Banana Pi BPI (2014) • Allwinner A20
- Banana Pi BPI Pro (2014) • Allwinner A20
- Banana Pi BPI R1 (2015) • Allwinner A20
- Banana Pi BPI R2 (2017) • MediaTek MT7623N
- Banana Pi BPI M1+ (2014) • Allwinner A20
- Banana Pi BPI M2 (2015) • Allwinner A31S
- Banana Pi BPI M2+ (2016) • Allwinner H3
- Banana Pi BPI M3 (2015) • Allwinner A83T
- Banana Pi BPI M2 Berry (2016) • Allwinner V40
- Banana Pi BPI M2 Magic (2016) • Allwinner A33/R16
- Banana Pi BPI M2 Ultra (2016) • Allwinner R40
- Banana Pi BPI M2 Zero (2017) • Allwinner H2+
- Banana Pi BPI M4 2G (2020) • Realtek RTD1395
- Banana Pi BPI P2 Zero (2018) • Allwinner H2+
- Banana Pi BPI W2 (2016) • Realtek RTD1296
- Banana Pi BPI M64 (2016) • Allwinner A64
- Banana Pi BPI S64 (2018) • Actions S700
- Banana Pi BPI R64 (2018) • MediaTek MT7622
