Black Box WAP-300BGN
Jump to navigation
Jump to search
Black Box WAP-300BGN v1
Manuf (OEM/ODM): Edimax EW-7415APn
Type: access point
FCC ID: NDD9574150902
Power: 5 VDC, 1 A
Connector type: barrel
CPU1: Ralink RT3052 (384 MHz)
FLA1: 4 MiB 4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Macronix MX29LV320DBTI-70G)
RAM1: 16 MiB 16,777,216 B <br />131,072 Kib <br />16,384 KiB <br />128 Mib <br />0.0156 GiB <br /> (Zentel A3V28S40ETP-G5)
Expansion IFs: none specified
Serial: yes, 4-pin header, internal, unpopulated, 3.3V TTL, (57600 8N1), JP2
WI1 chip1: Ralink RT3052
WI1 802dot11 protocols: bgn
WI1 MIMO config: 2x2:2
WI1 antenna connector: RP-SMA
ETH chip1: Ralink RT3052
LAN speed: 100M
LAN ports: 1
bgn
Additional chips
2.4GHz Power Amplifier IC;Microchip;SST12LP15A;SST, 12LP15A, 927064;2;
Stock bootloader: U-Boot 3.1 Ralink
Stock FW OS: Linux 2.6.21
Default SSID: default (99 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 0 are Black Box devices
Default login user: admin
Default login password: 1234
admin:1234 credentials used by 185 additional devices
of which 0 are Black Box devices
| FCC ID | |
|---|---|
| Hawking HOWABN1 | NDD9574150902 |
| Hawking HWABN1 rev 1 | NDD9574150902 |
| Sitecom WL-330 | NDD9574150902 |
For a list of all currently documented Ralink chipsets with specifications, see Ralink.
Pure Networking 802.11n Wireless LAN 2T2R Access Point
- "EW-7415APN V1.0A" is silkscreened on the top of the board.
- "1244-000000604-01Z" is silkscreened on the bottom of the board.
Serial
- Pinout
JP2 (TxD) (GND) (RxD) [3.3]
- Boot log
| • Bootlog • >> |
|---|
U-Boot 1.1.3 (Feb 24 2009 - 15:57:31)
Board: Ralink APSoC DRAM: 16 MB
relocate_code Pointer at: 80fa8000
****************************
Init GPIO Pin****************************
flash_protect ON: from 0xBFC00000 to 0xBFC26213
protect on 0
protect on 1
protect on 2
protect on 3
protect on 4
protect on 5
protect on 6
protect on 7
protect on 8
protect on 9
flash_protect ON: from 0xBFC30000 to 0xBFC3FFFF
protect on 10
*** Warning - bad CRC, using default environment
============================================
Ralink UBoot Version: 3.1
--------------------------------------------
ASIC 3052_MP1 (MAC to GigaMAC Mode)
DRAM COMPONENT: 128Mbits
DRAM BUS: 16BIT
Total memory: 16 MBytes
Flash: 4 MBytes
Date:Feb 24 2009 Time:15:57:31
============================================
icache: sets:256, ways:4, linesz:32 ,total:32768
dcache: sets:128, ways:4, linesz:32 ,total:16384
##### The CPU freq = 384 MHZ ####
SDRAM bus set to 16 bit
SDRAM size =16 Mbytes
Please choose the operation:
0: Load ucos code to SDRAM via TFTP Client.
1: Load system code to SDRAM via TFTP.
2: Load system code then write to Flash via TFTP.
3: Boot system code via Flash (default).
4: Entr boot command line interface.
9: Load Boot Loader code then write to Flash via TFTP.
You choosed 3
0
3: System Boot system code via Flash.
## Booting image at bfc50000 ...
Bad Magic Number,43535953
Image Name: Linux Kernel Image
Created: 2009-05-27 3:20:34 UTC
System Control Status = 0x20440000
Image Type: MIPS Linux Kernel Image (lzma compressed)
Data Size: 2895788 Bytes = 2.8 MB
Load Address: 80000000
Entry Point: 802ad000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 802ad000) ...
## Giving linux memsize in MB, 16
Starting kernel ...
LINUX started...
THIS IS ASIC
Linux version 2.6.21 (root@localhost.localdomain) (gcc version 3.4.2)
#2 Wed May 27 11:17:57 CST 2009
The CPU feqenuce set to 384 MHz
CPU revision is: 0001964c
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Built 1 zonelists. Total pages: 4064
Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock4
Primary instruction cache 32kB, physically tagged, 4-way, linesize 32 bytes.
Primary data cache 16kB, 4-way, linesize 32 bytes.
Synthesized TLB refill handler (20 instructions).
Synthesized TLB load handler fastpath (32 instructions).
Synthesized TLB store handler fastpath (32 instructions).
Synthesized TLB modify handler fastpath (31 instructions).
Cache parity protection disabled
cause = b0800040, status = 1100ff00
PID hash table entries: 64 (order: 6, 256 bytes)
calculating r4koff... 00177000(1536000)
CPU frequency 384.00 MHz
Using 192.000 MHz high precision timer.
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Memory: 13284k/16384k available (2228k kernel code,
3100k reserved, 508k data, 116k init, 0k highmem)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
Time: MIPS clocksource has been installed.
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
io scheduler noop registered (default)
FLASH_API: MAN_ID=C2 DEV_ID=22A8 SIZE=4MB
***********Init LED Driver*****************
Init GPIO Pin
Init GPIO Direction
Init GPIO Interrupt
***********Init LED Driver Finishing*****************
Ralink_gpio_init_irq
LED & GPIO & LAN Status Driver LED_VERSION
HDLC line discipline: version $Revision: 1.1.1.1 $, maxframe=4096
N_HDLC line discipline registered.
Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0xb0000500 (irq = 37) is a 16550A
serial8250: ttyS1 at I/O 0xb0000c00 (irq = 12) is a 16550A
loop: loaded (max 8 devices)
rdm_major = 254
GDMA1_MAC_ADRH -- : 0x00000000
GDMA1_MAC_ADRL -- : 0x00000000
Ralink APSoC Ethernet Driver Initilization. v1.60 256 rx/tx descriptors allocated, mtu = 1500!
GDMA1_MAC_ADRH -- : 0x0000000c
GDMA1_MAC_ADRL -- : 0x43305277
PROC INIT OK!
PPP generic driver version 2.4.2
PPP BSD Compression module registered
NET: Registered protocol family 24
ralink flash device: 0x1000000 at 0xbf000000
Ralink SoC physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 7 MTD partitions on "Ralink SoC physically mapped flash":
0x00000000-0x00030000 : "Bootloader"
mtd: Giving out device 0 to Bootloader
0x00030000-0x00040000 : "Config "
mtd: Giving out device 1 to Config
0x00040000-0x00050000 : "Factory"
mtd: Giving out device 2 to Factory
0x00050000-0x00160000 : "Kernel"
mtd: Giving out device 3 to Kernel
0x00160000-0x003e0000 : "RootFS"
mtd: Giving out device 4 to RootFS
0x003e0000-0x00400000 : "Cimage"
mtd: Giving out device 5 to Cimage
0x00050000-0x003e0000 : "Uimage"
mtd: Giving out device 6 to Uimage
block2mtd: version $Revision: 1.1.1.1 $
usbmon: debugfs is not available
u32 classifier
Performance counters on
nf_conntrack version 0.5.0 (128 buckets, 1024 max)
ip_tables: (C) 2000-2006 Netfilter Core Team, Type=Restricted Cone
ClusterIP Version 0.8 loaded successfully
arp_tables: (C) 2002 David S. Miller
ipt_time loading
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 116k freed
init started: BusyBox v1.11.1 (2009-05-27 11:18:54 CST)
starting pid 596, tty '': '/etc/rc.sh'
Cannot run '/etc/rc.sh': No such file or directory
starting pid 597, tty '': '-/bin/sh'console.
Algorithmics/MIPS FPU Emulator v1.5
BusyBox v1.11.1 (2009-05-27 11:18:54 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
Sat Jan 1 00:00:00 UTC 2000
BusyBox v1.11.1 (2009-05-27 11:18:54 CST) multi-call binary
Usage: syslogd [OPTION]...
killall: pptp.sh: no process killed
killall: pppoe.sh: no process killed
/bin/disconnect.sh: line 285: iptables: not found
/bin/disconnect.sh: line 285: iptables: not found
GDMA1_MAC_ADRH -- : 0x0000001f
GDMA1_MAC_ADRL -- : 0x1f743008
phy_tx_ring = 0x0091a000, tx_ring = 0xa091a000, size: 16 bytes
phy_rx_ring = 0x0091b000, rx_ring = 0xa091b000, size: 16 bytes
RT305x_ESW: Link Status Changed
GDMA1_FWD_CFG = 710000
ra2880stop()...Done
Free TX/RX Ring Memory!
GDMA1_MAC_ADRH -- : 0x0000001f
GDMA1_MAC_ADRL -- : 0x1f743008
phy_tx_ring = 0x008da000, tx_ring = 0xa08da000, size: 16 bytes
phy_rx_ring = 0x008db000, rx_ring = 0xa08db000, size: 16 bytes
GDMA1_FWD_CFG = 710000
Initialize WLAN interface
****************Use External RADIUS******************
rt2860v2_ap: module license 'unspecified' taints kernel.
2860 version : 1.9.0.0 (May 27 2009)
=== pAd = c1003000, size = 485040 ===
<-- RTMPAllocAdapterBlock, Status=0
RX DESC a0a91000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
1. Phy Mode = 9
2. Phy Mode = 9
3. Phy Mode = 9
MCS Set = ff ff 00 00 01
Main bssid = 00:1f:1f:74:30:08
The UUID Hex string is:2880288028801880a880001f1f743008
The UUID ASCII string is:28802880-2880-1880-a880-001f1f743008!
<==== RTMPInitialize, Status=0
0x1300 = 00064380
ra2880stop()...Done
Free TX/RX Ring Memory!
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
ifconfig: ioctl 0x8913 failed: No such device
bridge br0 doesn't exist; can't delete it
Setup bridge...
device eth2 entered promiscuous mode
phy_tx_ring = 0x00946000, tx_ring = 0xa0946000, size: 16 bytes
phy_rx_ring = 0x00947000, rx_ring = 0xa0947000, size: 16 bytes
GDMA1_FWD_CFG = 710000
route: ioctl 0x890c failed: No such process
interface eth2.2 does not exist!
ifconfig: SIOCSIFADDR: No such device
route: ioctl 0x890c failed: No such device
device ra0 entered promiscuous mode
route: ioctl 0x890c failed: No such process
br0: port 2(ra0) entering learning state
br0: port 1(eth2) entering learning state
br0: topology change detected, propagating
br0: port 2(ra0) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth2) entering forwarding state
route: ioctl 0x890c failed: No such process
route: ioctl 0x890c failed: No such process
------> 802.1x--------->Enter
------> 802.1x------>Exit
switch reg write offset=14, value=5555
switch reg write offset=40, value=1001
switch reg write offset=44, value=1001
switch reg write offset=48, value=1001
switch reg write offset=4c, value=1
switch reg write offset=50, value=2001
switch reg write offset=70, value=ffffffff
switch reg write offset=98, value=7f7f
switch reg write offset=e4, value=3f
Set: phy[0].reg[0] = b100
Set: phy[1].reg[0] = b100
Set: phy[2].reg[0] = b100
RT305x_ESW: Link Status Changed
Set: phy[3].reg[0] = b100
Set: phy[4].reg[0] = b100
**********************************************************************
* Running Diagd *
**********************************************************************
**********************************************************************
* Enable WSC_UPnP *
**********************************************************************
killall: snmpd: no process killed
**********************************************************************
* Enable LLTD *
**********************************************************************
killall: lld2d: no process killed
wscd: SSDP UDP PORT = 1900
**********************************************************************
* Enable GPIO Interrupt *
**********************************************************************
ralink_gpio:ioctl GPIO REG
killall: watchdog.sh: no process killed
killall: radiusd: no process killed
RADIUS server disable !!
interface ra-1 does not exist!
interface ra-1 does not exist!
interface ra-1 does not exist!
interface ra-1 does not exist!
interface ra-1 does not exist!
interface ra-1 does not exist!
kill: you need to specify whom to kill
**********************************************************************
* FREE Page,Dentries and Inodes Cache *
**********************************************************************
WEBS Restarting !
MemFree: 4532 kB
Cached: 1836 kB
|
