Buffalo WYR-G54
Buffalo WYR-G54
Manuf (OEM/ODM): SerComm IP806SM
Type: wireless router
FCC ID: P27IP806SM
Power: 12 VDC, 1 A
Connector type: barrel
CPU1: Marvell 88W8510 (160 MHz)
FLA1: 1 MiB1,048,576 B <br />8,192 Kib <br />1,024 KiB <br />8 Mib <br />9.765625e-4 GiB <br /> (Macronix MX29LV800TTC-70)
RAM1: 4 MiB4,194,304 B <br />32,768 Kib <br />4,096 KiB <br />32 Mib <br />0.00391 GiB <br /> (Mosel Vitelic V54C316162VCT6 × 2)
Expansion IFs: none specified
WI1 chip1: Marvell 88W8510
WI1 chip2: Marvell 88W8000
WI1 802dot11 protocols: bg
WI1 antenna connector: RP-SMA
ETH chip1: Marvell 88W8510
Switch: Marvell 88E6060
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1
bg
Default SSID: 000D0BXXXXXX (4 addl. devices)
Default IP address: 192.168.11.1
the IP 192.168.11.1 is used by 33 additional devices
of which 27 are Buffalo devices
Default login user: root
Default login password: blank
root:blank credentials used by 63 additional devices
of which 24 are Buffalo devices
| FCC ID | |
|---|---|
| HotBrick SoHo 401W | P27IP806SM |
| Linksys WRT54GC v1 | Q87-WRT54GC P27IP806SM |
| SerComm IP806SM | P27IP806SMP P27IP806SM |
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
User manual (via archive.org)
This device is a SerComm IP806SM.
"4900MZ20" is silkscreened on a production unit's board.
- This particualar board is using TEAPO and Sanyo capacitors.
The manual states the default SSID is the device's MAC address.
- Per an actual unit, this is indeed correct - it is the standard Buffalo default SSID format..
- the MAC address of the device w/ no delimiters and upper case characters.
