Cisco AIR-CAP2602E-A-K9
Cisco AIR-CAP2602 E-A-K9
Availability: common
Type: access point
FCC ID: LDK102080
IC ID: 2461B-102080
Power: 48 VDC, 0.35 A
Connector type: Ethernet (PoE)
PoE tag: 802.3af, standard
CPU1: Freescale P1020 (800 MHz)
FLA1: 32 MiB33,554,432 B <br />262,144 Kib <br />32,768 KiB <br />256 Mib <br />0.0313 GiB <br /> (Brand? Model?)
RAM1: 256 MiB268,435,456 B <br />2,097,152 Kib <br />262,144 KiB <br />2,048 Mib <br />0.25 GiB <br /> (Brand? Model? × 2)
Expansion IFs: none specified
Serial: yes
WI1 chip1: Marvell 88W8764
WI1 802dot11 protocols: bgn
WI1 MIMO config: 3x4:3
WI1 antenna connector: U.FL, RP-TNC
WI2 chip1: Marvell 88W8764
WI2 802dot11 protocols: an
WI2 MIMO config: 3x4:3
WI2 antenna connector: U.FL, RP-TNC
ETH chip1: Freescale P1020
LAN speed: 1G
LAN ports: 1
abgn
For a list of all currently documented Freescale (NXP) SoC's with specifications, see Freescale.
For a list of all currently documented Marvell chipsets with specifications, see Marvell.
Cisco Aironet 2600 Series Wireless Access Point
This device would seem to be using a Freescale Semiconductor SoC.
Additional models of..
- AIR-CAP2602E-A-K9 (external antennas)
- AIR-CAP2602I-A-K9 (internal antennas)
- AIR-SAP2602E-A-K9 (external antennas)
- AIR-SAP2602I-A-K9 (internal antennas)
Serial
Bootlog
cisco AIR-CAP2602E-A-K9 (PowerPC) processor (revision A0) with 180214K/81920K bytes of memory. Processor board ID FTX1809J61U PowerPC CPU at 800Mhz, revision number 0x2151 Last reset from power-on LWAPP image version 7.5.1.73 1 Gigabit Ethernet interface 2 802.11 Radios 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: B8:38:61:27:9F:AE Part Number : 73-14511-02 PCA Assembly Number : 800-37898-01 PCA Revision Number : A0 PCB Serial Number : FOC18013U5Z Top Assembly Part Number : 800-38357-01 Top Assembly Serial Number : FTX1809J61U Top Revision Number : A0 Product/Model Number : AIR-CAP2602E-A-K9 Radio0 present 8764 8000 0 A8000000 A8010000 0 Rate table has 650 entries (20 legacy/224 11n/406 11ac) POWER TABLE FILENAME = ram:/Y2.bin Radio1 present 8764 8000 0 88000000 88010000 4 POWER TABLE FILENAME = ram:/Y5.bin Secondary Bootloader - Starting system. Tide MB - 32MB of flash Xmodem file system is available. Boot CMD: 'boot flash:/ap3g2-k9w8-mx.152-4.JB6/ap3g2-k9w8-xx.152-4.JB6' Loading "flash:/ap3g2-k9w8-mx.152-4.JB6/ap3g2-k9w8-xx.152-4.JB6" File "flash:/ap3g2-k9w8-mx.152-4.JB6/ap3g2-k9w8-xx.152-4.JB6" uncompressed and executing...
