Dell TrueMobile 2300 v1 (WX-5565D)

Dell TrueMobile 2300 v1 (WX-5565D) A00
Availability: EoL

Manuf (OEM/ODM): Gemtek WX-5565D

FCC approval date: 09 May 2003
Country of manuf.: Taiwan

Amazon image

ASIN
B001V7596Q (, On Amazon, On CCC)
multiple revisions of this device, use caution

Type: wireless router

FCC ID: MXF-R920401G
IC ID: 3069B-WX5565D

Power: 5 VDC, 2 A
Connector type: barrel
Conn. measurements: 5.5 mm (OD), 2.5 mm (ID), 9.5 mm (LEN)

CPU1: Broadcom BCM4702 (125 MHz)
FLA1: 4 MiB4,194,304 B 32,768 Kib 4,096 KiB 32 Mib 0.00391 GiB  (AMD Am29LV320DB-90EI)
RAM1: 16 MiB16,777,216 B 131,072 Kib 16,384 KiB 128 Mib 0.0156 GiB  (AMIC A43L2616V-6 × 2)

Expansion IFs: Mini PCI
Mini PCI slots: 1
Serial: possible, no UART, unpopulated

WI1 module: Broadcom BCM94306MP
WI1 module IF: Mini PCI
WI1 chip1: Broadcom BCM4306
WI1 chip2: Broadcom BCM2050
WI1 802dot11 protocols: bg
WI1 antenna connector: none

ETH chip1: Broadcom BCM4702
ETH chip2: Altima AC101L
Switch: Broadcom BCM5325MA2
LAN speed: 100M
LAN ports: 4
WAN speed: 100M
WAN ports: 1

bg

Stock FW OS: Linux

TPFirmware supported: DD-WRT • (List)

Default SSID: wireless (10 addl. devices)
Default IP address: 192.168.2.1
the IP 192.168.2.1 is used by 294 additional devices
of which 3 are Dell devices
Default login user: admin
Default login password: admin
admin:admin credentials used by 1321 additional devices
of which 5 are Dell devices

802dot11 OUI: 00:90:4B (12 E, 35 W)
Ethernet OUI: 00:90:4B (12 E, 35 W)

	CPU1 brand	WI1 chip1 brand	WI1 chip2 brand
Dell TrueMobile 2300 v1 (WX-5565D)	Broadcom	Broadcom	Broadcom
Dell TrueMobile 2300 v2 (WRTB-107GD)	Broadcom	Broadcom	Broadcom

For a list of all currently documented Broadcom chipsets with specifications, see Broadcom.

OEM: Gemtek WX-5565D (WX5565_V02)

A00 on TechInfoDepot, A01 on TechInfoDepot, v01 on TechInfoDepot

The device is on the DD-WRT supported device table.

On the OpenWrt wiki

Switch is part no. BCM5325MA2KQM.

The Mini PCI card is soldered onto the retaining clips..

Used PSU(s)

The included power adapter is a Delta ADP-10SB REV. B.

ID/OD/length measurements used in this entry are likely not exact..

Delta Electronics ADP-10SB B (more)
Input: 100-240 VAC ~ 50-60 Hz, 0.4 A
Input connector: unknown Style: large, vertical Manuf. in: China
Output: 5 VDC, 2 A
Output connector: barrel (center +) OD: ?? ID: ?? LEN: ??

Recovery

This information is per tasiak on the OpenWrt forums.

The 2300 v1 is recoverable from (at least some) bricked states via pin shorting..

specifically, pins 9 and 10 on the Flash IC.

Pin 1 is denoted by the silkscreened dot. Pin 10 should be about where a small

silkscreened line on the PCB which intersects with R69 in the board photos below.

Recovery steps...

0: Figure out how you are going to proceed with the following steps.
1: Power the router off.
2: Power the router on. Wait for LED init..
3: Short pins 9 and 10 for a short period of time (~ 1 second).
4: Press the reset button. (I did not find this step necessary.)
5: The router should now be pingable at whatever the bootloader is set to.. probably 192.168.2.1.
6: TFTP (binary / octet mode) the firmware of choice

(I used the latest version of Tomato, the stock FW did not work) to the unit and wait.

Various additional info

w/ Tomato 1.28

dmesg

CPU revision is: 00024000
Loading BCM4710 MMU routines.
Primary instruction cache 8kb, linesize 16 bytes (2 ways)
Primary data cache 4kb, linesize 16 bytes (2 ways)
Linux version 2.4.20 (root@tobu) (gcc version 3.2.3 with Broadcom modifications) #1 Sun Jun 27 20:13:35 PDT 2010
Setting the PFC value as 0x15
Determined physical RAM map:
 memory: 01000000 @ 00000000 (usable)
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 noinitrd console=ttyS0,115200
CPU: BCM4710 rev 0 at 125 MHz
!unable to setup serial console!
Calibrating delay loop... 82.94 BogoMIPS
Memory: 14464k/16384k available (1336k kernel code, 1920k reserved, 108k data, 64k init, 0k highmem)
Dentry cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
HDLC line discipline: version $Revision: 1.1.1.4 $, maxframe=4096
N_HDLC line discipline registered.
PPP generic driver version 2.4.2
 Amd/Fujitsu Extended Query Table v1.1 at 0x0040
number of CFI chips: 1
Flash device: 0x400000 at 0x1fc00000
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "pmon"
0x00040000-0x003f0000 : "linux"
0x000e2a10-0x002f0000 : "rootfs"
0x002f0000-0x003f0000 : "jffs2"
0x003f0000-0x00400000 : "nvram"
sflash: chipcommon not found
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 2048)
Linux IP multicast router 0.06 plus PIM-SM
ip_conntrack version 2.1 (8092 buckets, 4096 max) - 368 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
All bugs added by David S. Miller <davem@redhat.com>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 64k freed
Warning: unable to open an initial console.
Algorithmics/MIPS FPU Emulator v1.5
nvram_commit(): init
nvram_commit(): end
ip_conntrack_pptp version 1.9 loaded
ip_nat_pptp version 1.5 loaded
ip_conntrack_rtsp v0.01 loading
ip_nat_rtsp v0.01 loading
eth0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.38.0
eth1: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.38.0
PCI: Enabling device 01:01.0 (0004 -> 0006)
eth2: Broadcom BCM4320 802.11 Wireless Controller 3.90.38.0
tomato_ct.c [Jun 27 2010 20:15:22]
device eth0 entered promiscuous mode
device eth2 entered promiscuous mode
br0: port 2(eth2) entering learning state
br0: port 1(eth0) entering learning state
br0: port 2(eth2) entering forwarding state
br0: topology change detected, propagating
br0: port 1(eth0) entering forwarding state
br0: topology change detected, propagating

cat /proc/cpuinfo

# cat /proc/cpuinfo
system type             : Broadcom BCM947XX
processor               : 0
cpu model               : BCM4710 V0.0
BogoMIPS                : 82.94
wait instruction        : no
microsecond timers      : yes
tlb_entries             : 32
extra interrupt vector  : no
hardware watchpoint     : no
VCED exceptions         : not available
VCEI exceptions         : not available
unaligned_instructions  : 1
dcache hits             : 3598479012
dcache misses           : 18079573
icache hits             : 1940176145
icache misses           : 110146386
instructions            : 2051150825

nvram show

# nvram show
action_service=
autofw_port0=
block_wan=1
boardnum=44
boardtype=bcm94710ap
boot_wait=on
brau_state=
btn_override=
btn_reset=
cifs1=
cifs2=
clkfreq=125
console_loglevel=1
ct_max=
ct_tcp_timeout=
ct_udp_timeout=
ddnsx0=
ddnsx0_cache=
ddnsx1=
ddnsx1_cache=
ddnsx_refresh=28
ddnsx_save=1
debug_clkfix=1
debug_cprintf=0
debug_cprintf_file=0
debug_ddns=0
debug_nocommit=0
dhcp_domain=wan
dhcp_lease=0
dhcp_num=50
dhcp_start=100
dhcpc_minpkt=0
dhcpd_dmdns=1
dhcpd_endip=
dhcpd_gwmode=
dhcpd_lmax=
dhcpd_slt=0
dhcpd_startip=
dhcpd_static=
dl_ram_addr=a0001000
dmz_enable=0
dmz_ipaddr=0
dmz_sip=
dns_addget=0
dns_intcpt=0
dnsmasq_custom=
dr_lan_rx=0
dr_lan_tx=0
dr_setting=0
dr_wan_rx=0
dr_wan_tx=0
env_path=
et0macaddr=00:90:4c:49:00:2c
et0mdcport=0
et0phyaddr=30
et1macaddr=00:90:4c:4a:00:2c
et1mdcport=1
et1phyaddr=1
filter=on
filter_client0=
filter_maclist=
filter_macmode=deny
http_enable=1
http_id=TIDe4bbaa8b6caea394
http_lanport=80
http_passwd=admin
http_username=
http_wanport=8080
https_crt=
https_crt_cn=
https_crt_file=
https_crt_save=0
https_enable=0
https_lanport=443
jffs2_exec=
jffs2_format=0
jffs2_on=0
l2tp_get_ip=
l2tp_server_ip=
lan_dhcp=0
lan_domain=
lan_gateway=0.0.0.0
lan_hwaddr=00:90:4C:49:00:2C
lan_hwnames=
lan_ifname=br0
lan_ifnames=eth0 eth2 eth3 eth4
lan_ipaddr=192.168.1.1
lan_lease=86400
lan_netmask=255.255.255.0
lan_proto=dhcp
lan_route=
lan_stp=0
lan_wins=
led_override=
log_events=
log_file=1
log_in=0
log_limit=60
log_mark=60
log_out=0
log_remote=0
log_remoteip=
log_remoteport=514
mac_wan=
mac_wl=
macnames=
manual_boot_nv=0
mtu_enable=0
multicast_pass=0
ne_shlimit=0,3,60
ne_syncookies=0
ne_valpha=2
ne_vbeta=6
ne_vegas=0
ne_vgamma=2
nf_ftp=1
nf_h323=1
nf_l7in=1
nf_loopback=1
nf_pptp=1
nf_rtsp=1
nf_ttl=0
ntp_kiss=
ntp_kiss_ignore=
ntp_server=0.pool.ntp.org 1.pool.ntp.org 2.pool.ntp.org
ntp_tdod=0
ntp_updates=4
os_date=Sun, 27 Jun 2010 20:10:52 -0700
os_flash_addr=bfc40000
os_name=linux
os_ram_addr=80001000
os_version=1.28.1816
pmon_ver=PMON 3.11.48.7
portforward=0<3<1.1.1.0/24<1000:2000<<192.168.1.2<ex: 1000 to 2000, restricted>0<2<<1000,2000<<192.168.1.2<ex: 1000 and 2000>0<1<<1000<2000<192.168.1.2<ex: different internal port>0<3<<1000:2000,3000<<192.168.1.2<ex: 1000 to 2000, and 3000>
ppp_ac=
ppp_demand=0
ppp_get_ac=
ppp_get_srv=
ppp_idletime=5
ppp_keepalive=0
ppp_mru=1500
ppp_mtu=1500
ppp_passwd=
ppp_redialperiod=30
ppp_service=
ppp_static=0
ppp_static_ip=
ppp_username=
pppoe_ac=
pppoe_demand=0
pppoe_idletime=5
pppoe_ifname=
pppoe_keepalive=0
pppoe_lef=
pppoe_lei=
pppoe_passwd=
pppoe_pid0=
pppoe_service=
pppoe_static=0
pppoe_static_ip=
pppoe_username=
pptp_get_ip=
pptp_server_ip=
qos_ack=1
qos_burst0=
qos_burst1=
qos_default=3
qos_enable=0
qos_fin=0
qos_ibw=1000
qos_icmp=0
qos_obw=230
qos_orates=80-100,10-100,5-100,3-100,2-95,1-50,1-40,1-30,1-20,1-10
qos_orules=0<<6<d<80,443<0<<0:512<1<WWW>0<<6<d<80,443<0<<512:<3<WWW (512K+)>0<<-1<d<53<0<<0:2<0<DNS>0<<-1<d<53<0<<2:<4<DNS (2K+)>0<<-1<d<1024:65535<0<<<4<Bulk Traffic
qos_reset=0
qos_rst=0
qos_syn=0
remote_management=0
remote_mgt_https=0
restore_defaults=0
rmgt_sip=
router_name=tomato
routes_static=
routes_static_saved=
rrule0=0|1320|300|31|||word text ^begins-with.domain. .ends-with.net$ ^www.exact-domain.net$|0|example
rruleN=0
rrules_radio=-1
rrulewp=80,8080
rstats_bak=0
rstats_colors=
rstats_data=
rstats_enable=1
rstats_exclude=
rstats_offset=1
rstats_path=
rstats_sshut=1
rstats_stime=48
sch_c1=
sch_c1_cmd=
sch_c2=
sch_c2_cmd=
sch_c3=
sch_c3_cmd=
sch_rboot=
sch_rcon=
scratch=a0180000
script_brau=
script_fire=
script_init=
script_shut=
script_wanup=
sdram_config=0x0000
sdram_init=0x0419
sdram_ncdl=0x00000000
sdram_refresh=0x8040
security_mode2=disabled
security_mode=disabled
security_mode_last=
sesx_b0=1
sesx_b1=4
sesx_b2=4
sesx_b3=4
sesx_led=0
sesx_script=
sshd_authkeys=
sshd_eas=0
sshd_hostkey=
sshd_pass=1
sshd_port=22
sshd_remote=0
sshd_rport=2222
t_cafree=0
t_features=0x0
t_fix1=
t_hidelr=0
t_model=0
t_model_name=Broadcom 10/bcm94710ap/44//
t_noise=-99
telnetd_eas=1
telnetd_port=23
tftp_ipaddr=192.168.2.1
tm_dst=1
tm_sel=PST8PDT,M3.2.0/2,M11.1.0/2
tm_tz=PST8PDT,M3.2.0/2,M11.1.0/2
trigforward=0<1<3000:4000<5000:6000<ex: open 5000-6000 if 3000-4000>
upnp_enable=1
upnp_port=5000
upnp_secure=1
wait_time=5
wan_dns=
wan_domain=
wan_gateway=0.0.0.0
wan_gateway_buf=0.0.0.0
wan_get_dns=
wan_get_domain=
wan_hostname=unknown
wan_hwaddr=00:90:4C:49:00:2D
wan_hwname=
wan_iface=eth1
wan_ifname=eth1
wan_ifnameX=eth1
wan_ifnames=eth1
wan_ipaddr=0.0.0.0
wan_islan=0
wan_lease=0
wan_mtu=1500
wan_netmask=0.0.0.0
wan_primary=1
wan_proto=dhcp
wan_run_mtu=1500
wan_speed=4
wan_unit=0
wan_wins=
watchdog=1000
wds_enable=0
wds_save=
web_css=tomato
web_mx=status,bwm
web_pb=
web_svg=1
web_wl_filter=0
wk_mode=gateway
wl0_active_mac=
wl0_afterburner=off
wl0_akm=
wl0_antdiv=-1
wl0_ap_isolate=0
wl0_auth=0
wl0_auth_mode=none
wl0_bcn=100
wl0_bss_enabled=1
wl0_channel=6
wl0_closed=0
wl0_corerev=4
wl0_country=JP
wl0_country_code=JP
wl0_crypto=tkip
wl0_distance=
wl0_dtim=1
wl0_frag=2346
wl0_frameburst=off
wl0_gmode=1
wl0_gmode_protection=off
wl0_hwaddr=00:90:4B:36:30:06
wl0_ifname=eth2
wl0_infra=1
wl0_key1=
wl0_key2=
wl0_key3=
wl0_key4=
wl0_key=1
wl0_lazywds=1
wl0_leddc=0x640000
wl0_mac_deny=
wl0_mac_list=
wl0_maclist=
wl0_macmode=disabled
wl0_maxassoc=128
wl0_mode=ap
wl0_mrate=0
wl0_net_mode=mixed
wl0_net_reauth=36000
wl0_passphrase=
wl0_phytype=g
wl0_phytypes=g
wl0_plcphdr=long
wl0_radio=1
wl0_radioids=BCM2050
wl0_radius_ipaddr=
wl0_radius_key=
wl0_radius_port=1812
wl0_rate=0
wl0_rateset=default
wl0_reg_mode=off
wl0_rts=2347
wl0_ssid=wireless
wl0_txant=3
wl0_txpwr=42
wl0_unit=0
wl0_wds=
wl0_wds_timeout=1
wl0_wep=disabled
wl0_wep_bit=128
wl0_wep_buf=
wl0_wep_gen=
wl0_wep_last=
wl0_wme=off
wl0_wme_ap_be=15 63 3 0 0 off
wl0_wme_ap_bk=15 1023 7 0 0 off
wl0_wme_ap_vi=7 15 1 6016 3008 off
wl0_wme_ap_vo=3 7 1 3264 1504 off
wl0_wme_no_ack=off
wl0_wme_sta_be=15 1023 3 0 0 off
wl0_wme_sta_bk=15 1023 7 0 0 off
wl0_wme_sta_vi=7 15 2 6016 3008 off
wl0_wme_sta_vo=3 7 2 3264 1504 off
wl0_wpa_gtk_rekey=3600
wl0_wpa_psk=
wl_active_mac=
wl_afterburner=off
wl_akm=
wl_antdiv=-1
wl_ap_isolate=0
wl_auth=0
wl_auth_mode=none
wl_bcn=100
wl_bss_enabled=1
wl_channel=6
wl_closed=0
wl_corerev=
wl_country=JP
wl_country_code=JP
wl_crypto=tkip
wl_distance=
wl_dtim=1
wl_frag=2346
wl_frameburst=off
wl_gmode=1
wl_gmode_protection=off
wl_hwaddr=
wl_ifname=eth2
wl_infra=1
wl_key1=
wl_key2=
wl_key3=
wl_key4=
wl_key=1
wl_lazywds=1
wl_leddc=0x640000
wl_mac_deny=
wl_mac_list=
wl_maclist=
wl_macmode=disabled
wl_maxassoc=128
wl_mode=ap
wl_mrate=0
wl_net_mode=mixed
wl_net_reauth=36000
wl_passphrase=
wl_phytype=g
wl_phytypes=
wl_plcphdr=long
wl_radio=1
wl_radioids=
wl_radius_ipaddr=
wl_radius_key=
wl_radius_port=1812
wl_rate=0
wl_rateset=default
wl_reg_mode=off
wl_rts=2347
wl_ssid=wireless
wl_txant=3
wl_txpwr=42
wl_unit=0
wl_wds=
wl_wds_timeout=1
wl_wep=disabled
wl_wep_bit=128
wl_wep_buf=
wl_wep_gen=
wl_wep_last=
wl_wme=off
wl_wme_ap_be=15 63 3 0 0 off
wl_wme_ap_bk=15 1023 7 0 0 off
wl_wme_ap_vi=7 15 1 6016 3008 off
wl_wme_ap_vo=3 7 1 3264 1504 off
wl_wme_no_ack=off
wl_wme_sta_be=15 1023 3 0 0 off
wl_wme_sta_bk=15 1023 7 0 0 off
wl_wme_sta_vi=7 15 2 6016 3008 off
wl_wme_sta_vo=3 7 2 3264 1504 off
wl_wpa_gtk_rekey=3600
wl_wpa_psk=
wlx_hpamp=
---
435 entries, 7277 bytes used, 25491 bytes free.

cat /proc/mtd
# cat /proc/mtd dev: size erasesize name mtd0: 00040000 00010000 "pmon" mtd1: 003b0000 00010000 "linux" mtd2: 0020d5f0 00010000 "rootfs" mtd3: 00100000 00010000 "jffs2" mtd4: 00010000 00010000 "nvram"

Images

poor quality scans
shot of the top of the main board
shot of the bottom of the main board